Details, datasheet, quote on part number: VCO190-395T
PartVCO190-395T
CategoryTiming Circuits => Oscillators => VCO (Voltage Controlled Oscillators)
DescriptionHigh Performance Signal Source
CompanySirenza
DatasheetDownload VCO190-395T datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Model: VCO190-395T Rev: B Date: 4/22/2003 Customer: VARI-L COMPANY Operating Temperature Range: C)

Parameter Frequency Range Tuning Voltage: 375 MHz 415 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Frequency Pushing 4.75-5.25 V Frequency Pulling dB RL Tuning Port Capacitance Output Impedance -

Package Information Package Type: Dimensions: x 0.156 inches Drawing Number: Drawing Revision: 60035 E


 

Some Part number from the same manufacture Sirenza
VCO190-422T High Performance Signal Source
VCO190-435T
VCO190-445T
VCO190-450AT
VCO190-450T
VCO190-453T
VCO190-470T
VCO190-490T
VCO190-492T
VCO190-493T
VCO190-52U
VCO190-540T
VCO190-548T
VCO190-550T
VCO190-577U
VCO190-588T
VCO190-598U
VCO190-630T
VCO190-640T
VCO190-675T
VCO190-680T
Same catergory

100311 : Low Skew 1:9 Differential Clock Driver. The 100311 contains nine low skew differential drivers, designed for generation of multiple, minimum skew differential clocks from a single differential input (CLKIN, CLKIN). If a single-ended input is desired, the VBB output pin may be used to drive the remaining input line. A HIGH on the enable pin (EN) will force a LOW on all of the CLKn outputs.

AB38TAB26T : Crystal Oscillators.  8.3 X 03.2 MM or 6.2 X 02.1 MM Cylindrical Type 30kHz to 200kHz.

ASQ433.92 : Crystal Oscillators. Two-port 433.92MHz Leaded, To-39 Package 2/2003. Two-port SAW resonator 433.92MHz. See page 87- 88 for additional frequencies. Wide operating temperature range. Wireless car alarm, Garage door opener. Remote keyless entry. DC voltage Operating temperature Storage temperature Maximum power dissipation C 10dBm CHARACTERISTIC Center frequency Insertion loss Unloaded quality factor Loaded quality factor.

CDCF5801DBQ : PLL-Based Synthesizers. ti CDCF5801, Low Jitter PLL Based Multiplier/divider With Programmable Delay Lines Down to Sub 10ps.

CY25245PVC : EMI Reduction. Emi Suppression. Cypress PREMISTM SMARTSPREADTM family offering Generates an electromagnetic interference (EMI) optimized clocking signal at the output Selectable output frequency range Single or 10% down or center spread output Integrated loop filter components Operates with or 5V supply Low power CMOS design Available in 20-pin Small Shrunk Outline Package (SSOP).

ICS87004 : Zero Delay Fanout. Differentialto Lvcmos/lvttl. 4 LVCMOS/LVTTL outputs, 7 typical output impedance Selectable CLK1, nCLK1 clock inputs CLKx, nCLKx pairs can accept the following differential input levels: LVPECL, LVDS, LVHSTL, HCSL, SSTL Internal bias on nCLK0 and nCLK1 to support LVCMOS/LVTTL levels on CLK0 and CLK1 inputs Output frequency range: to 250MHz Input frequency range: to 250MHz VCO range:.

ICS8737 : Dividers. Lowskew Divide-by-1, Divide-by-2 Clock Generator. 2 divide by 1 differential 3.3V LVPECL outputs; 2 divide by 2 differential 3.3V LVPECL outputs Selectable differential CLK, nCLK or LVPECL clock inputs CLK, nCLK pair can accept the following differential input levels: LVDS, LVPECL, LVHSTL, SSTL, HCSL PCLK, nPCLK supports the following input types: LVPECL, CML, SSTL Maximum output frequency: 650MHz.

KFO90AT : 3.3V/5.0V  12.8 X 9.8mm Hcmos/ttl Plastic SMD With Tri-state E/d.

MQF70.0-1500/03 : Monolithic Crystal Filter (MCF). Pole No. = 6 ;; Loss /dB = 6.0 ;; Passband /dB = 2.0 ;; Passband /±kHz = 7.50 ;; Ripple /dB = 2.0 ;; Ripple /±kHz = 6.0 ;; Stopband /dB = 60 ;; Stopband /±kHz = 30.00 ;; Stopband /dB = 70 ;; Stopband /±kHz = 100.0 ;; Impedance R/ohm = 50 ;; Impedance C/pf = 0.00 ;; Remarks =   ;; Case.

MXF55-8BF-BT6 : Frequency: 55 MHZ.

NJU6375A : Quartz Crystal Oscillator. Quartz Crystal Oscillator.

PLL210-01 : Power PC FTG< , Power PC Clock Generator For Printer. Power PC Clock Generator with Integrated 0-delay Buffer for Printer 1 CPU Clock output with selectable frequencies 133or 166 MHz). 2 ASIC output clocks (at CPU speed). 4 PCI output clocks. Output buffer enable/disable ability for PCI and BUFOUT. Selectable Spread Spectrum (SST) for EMI reduction on ASIC, CPU and PCI. Advanced, low power, sub-micron.

SY69952 : Clock And Data Recovery (CDRs). SY69952 OC-3/STS-3 Clock Recovering Transceiver.

TFS70N : SAW Devices (Surface Acoustic Wave). Application = Bandselective Repeater, Cellular ;; Center Frequency = 70.0 MHZ ;; 3 DB = 10.0 MHZ ;; Pass Band Ripple = 2.0dB ;; Insertion Loss = 24.0dB ;; Group Delay Ripple = 200ns ;; Package = 35 MM X 20 MM Dip.

V630ME02 : Package Style = MINI-14H ;; Frequency (MHz) = 2200 to 2285 ;; N@10KHz (dBc/Hz) = -94 ;; Tuning Voltage (Vdc) = 0.50 to 4.50 ;; Tuning Sensitivity (MHz/V) = 53 ;; Power (dBm) = 4.00 ± 3.00 ;; Op.temp ( C) = -30 to 85 ;; VCC (Vdc) = 4.50 ;; Icc (mA) = 14.

W42C31-03 : Clock Circuits. Spread Spectrum Frequency Timing Generator. Maximized EMI suppression using Cypress's Spread Spectrum technology Generates a spread spectrum copy of the provided input Integrated loop filter components Operates with a 5V supply Low power CMOS design Available in 8-pin SOIC (Small Outline Integrated Circuit) In a system, not only is EMI reduced in the various clock lines, but also in all signals.

 
0-C     D-L     M-R     S-Z