Details, datasheet, quote on part number: VCO190-493T
PartVCO190-493T
CategoryTiming Circuits => Oscillators => VCO (Voltage Controlled Oscillators)
DescriptionHigh Performance Signal Source
CompanySirenza
DatasheetDownload VCO190-493T datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Model: VCO190-493T Rev: A Date: 4/22/2003 Customer: VARI-L COMPANY Operating Temperature Range: ° C)

Parameter Frequency Range Tuning Voltage: 485 MHz 500 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 4.75-5.25 V Frequency Pulling dB RL Tuning Port Capacitance Output Impedance -

Package Information Package Type: Dimensions: x 0.156 inches Drawing Number: Drawing Revision: 60035 E


 

Some Part number from the same manufacture Sirenza
VCO190-52U High Performance Signal Source
VCO190-540T
VCO190-548T
VCO190-550T
VCO190-577U
VCO190-588T
VCO190-598U
VCO190-630T
VCO190-640T
VCO190-675T
VCO190-680T
VCO190-707U
VCO190-70T
VCO190-744T
VCO190-750U
VCO190-752T
VCO190-768U
VCO190-773T
VCO190-775T
VCO190-810T
VCO190-811U
Same catergory

5V925 : Programmable Clock Generator. to 3.6V operating voltage 3.125 MHz to 160MHz output frequency range 4 programmable frequency outputs Input from fundamental crystal oscillator or external source Balanced Drive Outputs ±12mA PLL disable mode for low frequency testing Select inputs (S[1:0]) for divide selection (multiply ratio of and 8) 5V tolerant inputs Low output skew/jitter External.

CDCVF2510 : General Purpose/. 3.3v Phase-lock Loop Clock Driver. Designed to Meet and Exceed PC133 SDRAM Registered DIMM Rev. 1.1 Spread Spectrum Clock Compatible Operating Frequency 50 MHz to 175 MHz Static Phase Error Distribution at 66 MHz to 166 MHz ±125 ps Jitter (cyc ­ cyc) at 66 MHz to 166 MHz |70| ps Advanced Deep Submicron Process Results in More Than 40% Lower Power Consumption Versus Current Generation.

CY22392 : Three-pll General Purpose Flash Programmable Clock Generator. Three-PLL General Purpose FLASH Programmable Clock Generator Three integrated phase-locked loops Benefits Generates to 3 unique frequencies on 6 outputs to 200 MHz from an external source. Functional upgrade for current CY2292 family. Ultra Wide Divide Counters 11-bit P, and 7-bit Allows for 0 ppm Frequency Generation and Frequency ConverPost Divide).

FXO-64F : Crystal Oscillators. Frequency: 1.850 MHZ. ˇThis crystal has a built-in high-precision C-MOS IC suitable for a wide range of temperature. ˇIdeal for base stations and for PHS sysyems etc. ˇLower noise and lower current for reduced power consumption. ˇ3.3V supply model also available. Item Application Supply Voltage Frequency Range Load Frequency Stability Operating Temperature Range Storage.

ICS551 : General Purpose/. 1 to 4 Clock Buffer. The is a low cost, high speed single input to four output clock buffer. Part of ICS' ClockBlocksTM family, this is our lowest cost, small clock buffer. See the ICS552-02B for monolithic dual version of the a 20 pin QSOP. ICS makes many non-PLL and PLL based low skew output devices as well as Zero Delay Buffers to synchronize clocks. Contact ICS for all of your.

ICS9169C-27 : Frequency Generator For Pentium(tm) Based Systems. The is a low-cost frequency generator designed specifically for Pentium based chip set systems. The integrated buffer minimizes skew and provides all the clocks required. A 14.318 MHz XTAL oscillator provides the reference clock to generate standard Pentium frequencies. The CPU clock makes gradual frequency transitions without violating the PLL timing.

ICS9248-171 : Motherboards. AMDK7 System Clock. Recommended Application: ALI 1647 style chipset Output : 1 - Differential pair open drain CPU clocks 1 - Single-ended open drain CPU clock 13 - SDRAM 7 - PCI 2 - AGP 1 - REF @3.3V, (selectable strength) through I2C : to 147MHz frequency support Support power management: DG stop, PCI stop and Power down Mode from I2C programming. Spread spectrum for EMI control.

MQF26.5-2000/01 : Monolithic Crystal Filter (MCF). Pole No. = 2 ;; Loss /dB = 3.0 ;; Passband /dB = 3.0 ;; Passband /±kHz = 10.00 ;; Ripple /dB = 1.0 ;; Ripple /±kHz = 5.0 ;; Stopband /dB = 20 ;; Stopband /±kHz = 00.00 ;; Stopband /dB = 50 ;; Stopband /±kHz = 910 ;; Impedance R/ohm = 2500 ;; Impedance C/pf = 0.50 ;; Remarks =   ;; Case.

MQF45.0-1500/04 : Monolithic Crystal Filter (MCF). Pole No. = 8 ;; Loss /dB = 6.0 ;; Passband /dB = 3.0 ;; Passband /±kHz = 7.50 ;; Ripple /dB = 2.0 ;; Ripple /±kHz = 6.0 ;; Stopband /dB = 60 ;; Stopband /±kHz = 20.00 ;; Stopband /dB = 75 ;; Stopband /±kHz = 25.00 ;; Impedance R/ohm = 650 ;; Impedance C/pf = 1.50 ;; Remarks =   ;; Case.

SD-B2920 : XO PECL Oscillators. Surface Mount 6 Pad 5x7mm Frequency Range (Mhz) : 100.0 - 125.0 Output/input : Fast Edge Differential, 2.5V.

SN761672A : . Single Chip Mixer/Oscillator and Synthesizer VHF-L, VHF-H, UHF 3-Band Local Oscillator I2C Bus Protocol Bidirectional Data Transmission 30-V Tuning Voltage Output 4-Channel NPN Type Band Switch Drivers Programmable Reference Divider Ratio 1024) 5-V Power Supply 32-Pin TSSOP Package is a single chip synthesized tuner IC designed for TV/VCR tuning systems.

UM-4 : Crystal Oscillators. Frequency Range = 1.000 MHZ to 300.000 MHZ ;; Frequency Stability = ±5 PPM to ±25 PPM ;; Dimensions Mm/inch = ±3 PPM to ±50 PPM ;;.

V806ME04 : Package Style = MINI-14H ;; Frequency (MHz) = 2540 to 2600 ;; N@10KHz (dBc/Hz) = -97 ;; Tuning Voltage (Vdc) = 0.50 to 4.50 ;; Tuning Sensitivity (MHz/V) = 48 ;; Power (dBm) = 5.00 ± 2.00 ;; Op.temp ( C) = -30 to 80 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 13.

5V9885 : 3.3V EEPROM Programmable Clock Generator. Three internal PLLs Internal non-volatile EEPROM JTAG and FAST mode I2C serial interfaces Input Frequency Ranges: to 400MHz Output Frequency Ranges: to 550MHz Reference Crystal Input with programmable oscillator gain and programmable linear load capacitance - Crystal Frequency Range: to 50MHz Each PLL has an 8-bit pre-scaler and a 12-bit feedback-divider.

YH1460 : YH1460/1461 Series OCXO 10.0 MHz to 100.0 MHz YH1460 - Sinewave, +7dBm min. into 50 ohms YH1461 - Squarewave, ACMOS.

DS1305 : Serial Alarm Real-Time Clock The DS1305 serial alarm real-time clock provides a full binary coded decimal (BCD) clock calendar that is accessed by a simple serial interface. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days,.

 
0-C     D-L     M-R     S-Z