|Category||Timing Circuits => Oscillators => VCO (Voltage Controlled Oscillators)|
|Description||High Performance Signal Source|
|Datasheet||Download VCO190-577U datasheet
Model: VCO190-577U Rev: A Date: 4/22/2003 Customer: VARI-L COMPANY Operating Temperature Range: ° C)
Parameter Frequency Range Tuning Voltage: 567 MHz 586 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 4.75-5.25 V Frequency Pulling dB RL Tuning Port Capacitance Output Impedance -
Package Information Package Type: Dimensions: x 0.13 inches Drawing Number: Drawing Revision: 60036 E
|Some Part number from the same manufacture Sirenza|
|VCO190-588T High Performance Signal Source|
0461-01 : Ecl 100K 8 Tap Leading Edge Control, Ecl Active. Pulse Voltage, Logic 1 Pulse Voltage, Logic 0 Rise Time Pulse Width Pulse Period Supply Voltage -0.9 Volts -1.7 Volts ns (20%-80%) Total Delay 4 x Pulse Width -5.0 Volts Supply Voltage Logic 1 Input Voltage Logic 0 Input Voltage Logic 1 Output Voltage Logic 0 Output voltage Logic 1 Input Current Logic 0 Input Current Operating Free Air Temperature Min.
CDC209-7DW : Non-PLL. ti CDC209-7, Dual 1-to-4 Clock Drivers. CDC209 Replaces 74AC11208 CDC209-7 Replaces 74AC11208-7 Low-Skew Propagation Delay s for Clock-Driver Applications CMOS-Compatible Inputs and Outputs Flow-Through Architecture Optimizes PCB Layout Characterized for Operation at 5-V and 3.3-V VCC Center-Pin VCC and GND Pin Configurations Minimize High-Speed Switching Noise EPIC TM (Enhanced-Performance.
CDC2510APWR : PLL-Based Clock Buffers (Zero-Delay). ti CDC2510A, 3.3-V Phase-lock Loop Clock Driver.
CDC304D : Non-PLL. ti CDC304, 1-To-8, Divide-By-2 Clock Driver With Preset And Clear.
CX-1AT : Crystal Oscillators->Leaded Crystal. Leaded Crystal. The CX-1 quartz crystal is a high quality miniature AT cut quality resonator. The CX-1 is hermetically sealed in a rugged, miniature ceramic package, one-fourth the size of an eight-pin mini-DIP. The CX-1 crystal is manufactured using the STATEK-developed photolithographic process, and was designed utilizing the experience acquired by producing millions.
CXOMOSCILLATOR : Crystal Oscillators. 1.25 MHZ to 100 MHZ Ultra-low Profile (1.3mm) Miniature Surface Mount Crystal_oscillator.
FMOECL : Thru-hole Ecl & Pecl Clocks 5.0 VDC 5.0 VDC. Parameter Frequency Range Overall Frequency Tolerance Operating Temperature Range Storage Temperature Supply Voltage (Vdd) Supply Current Symmetry (Duty Cycle) Logic Type Output Load* Output "0" Level (VOL) Output "1" Level (V0H) Rise and Fall Time Pin 1 Options (See Spec Options C, T below and add option letter in part number) Aging @ 25°C ECL and PECL.
ICS9148-26 : Clock Circuits. Frequency Generator & Integrated Buffers For Pentium/pro TM.
MK1704S : . The is an upgraded version of the MK1704 and is recommended for all new designs. It offers more reduction in the frequency amplitude peaks and will support frequencies to 140 MHz. The MK1704A generates a low EMI output clock from a clock input. The part is designed to dither the LCD interface clock or other clocks for flat panel graphics controllers.
MK1705A : General Purpose PLL. Ati Low Emi Clock Generator. The MK1705A generates a low EMI output clock from a clock or crystal input. The part is designed to dither the LCD interface clock or other clocks for ATI's flat panel graphics controllers. The device uses ICS/MicroClock's proprietary mixture of analog and digital Phase-Locked Loop (PLL) technology to synthesize the frequency, and our patented technique.
MQF10.7-3000/10 : Monolithic Crystal Filter (MCF). Pole No. = 10 ;; Loss /dB = 3.0 ;; Passband /dB = 6.0 ;; Passband /±kHz = 15.00 ;; Ripple /dB = 2.0 ;; Ripple /±kHz = 12.0 ;; Stopband /dB = 75 ;; Stopband /±kHz = 30.00 ;; Stopband /dB = 90 ;; Stopband /±kHz = 35.00 ;; Impedance R/ohm = 5500 ;; Impedance C/pf = -1.00 ;; Remarks = ;; Case.
MQF130.6-1500/06 : Monolithic Crystal Filter (MCF). Pole No. = 4 ;; Loss /dB = 6.5 ;; Passband /dB = 3.0 ;; Passband /±kHz = 7.50 ;; Ripple /dB = 1.0 ;; Ripple /±kHz = 5.0 ;; Stopband /dB = 50 ;; Stopband /±kHz = 35.00 ;; Stopband /dB = ;; Stopband /±kHz = ;; Impedance R/ohm = 50 ;; Impedance C/pf = 0.00 ;; Remarks = .
NJU6369A : Quartz Crystal Oscillator. 1.5V Operation Fundamental Quartz Crystal Oscillator.
SF0070CD02255T : 70. Micro Networks Corp., 324 Clark Street, Worcester, MA 01606, USA tel: 508-852-5400, fax:508-852-8456, www.micronetworks.com Parameter Center Frequency (Fc) 3 dB Bandwidth 40 dB Bandwidth Delay Input Power Insertion Loss Source and Load Impedance Phase Linearity 2 Passband Variation Rejection (10-62.25 MHz) Rejection (62.25-66.5 MHz) Rejection (66.5-67.1.
SF1056A : SAW Resonators. Frequency = 110.592 ;; = Filter, Dect if. Designed for DECT and WLAN IF Applications Low Insertion Loss Excellent Size-to-Performance Ratio Hermetic 6.5 mm Surface-Mount Case Unbalanced Input and Output Insertion Loss 3 dB Passband Group Delay Variation over fc ±576 kHz Rejection to fc-1.728 and to fc+3.4 MHz fc -3.4 and to 200 MHz Ultimate Operating Temperature Range Impedance Matching 50 W unbalanced.
W229B : Frequency Generator For Integrated Core Logic With 133-mhz FSB. Frequency Generator for Integrated Core Logic with 133-MHz FSB Maximized EMI suppression using Cypress's Spread Spectrum technology Low jitter and tightly controlled clock skew Highly integrated device providing clocks required for CPU, core logic, and SDRAM Two copies of CPU clock Thirteen copies of SDRAM clock Eight copies of PCI clock One copy of synchronous.
ICS181-03 : Low EMI Single-Output Clock The ICS181-03 generates a low EMI output clock from a clock or crystal input. The device uses ICS’ proprietary mix of analog and digital Phase-Locked Loop (PLL) technology to spread the frequency spectrum of the output, thereby reducing the frequency amplitude peaks by several dB. The ICS181-03 offers down spread selection.
AD9514 : 1.6 GHz Clock Distribution IC, Dividers, Delay Adjust, Three Outputs The AD9514 a multi-output clock distribution IC in a design that emphasizes low jitter and phase noise to maximize data converter performance. Other applications with demanding phase noise and jitter requirements also benefit from this part. There are three independent clock outputs.
M41T82 : Serial RTC with Battery Switchover. to 5.5V clock operating voltage Ultra-low battery supply current of 365nA Counters for tenths/hundredths of seconds, minutes, hours, day, date, month, year, and century Programmable clock calibration (analog and digital) Automatic switchover and reset output circuitry (fixed reference) M41T83S VCC 5.50V (2.85V VRST M41T83R VCC 5.50V (2.55V VRST.
3D7702 : Gated Delay-line Oscillator Gated delay-line oscillator. MONOLITHIC GATED DELAY LINE OSCILLATOR (SERIES 3D7702) All-silicon, low-power CMOS technology TTL/CMOS compatible inputs and outputs Vapor phase, IR and wave solderable Auto-insertable (DIP pkg.) Frequency range: 0.3MHz through 100MHz Frequency tolerance: 0.5% typical Temperature stability: ±1.5% typical to 85C) Vdd stability: ±0.5% typical 5.25V) 14-pin.