Details, datasheet, quote on part number: VCO190-630T
PartVCO190-630T
CategoryTiming Circuits => Oscillators => VCO (Voltage Controlled Oscillators)
DescriptionHigh Performance Signal Source
CompanySirenza
DatasheetDownload VCO190-630T datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Model: VCO190-630T Rev: A Date: 4/22/2003 Customer: VARI-L COMPANY Operating Temperature Range: ° C)

Parameter Frequency Range Tuning Voltage: 600 MHz 660 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 4.75-5.25 V Frequency Pulling dB RL Tuning Port Capacitance Output Impedance -

Package Information Package Type: Dimensions: x 0.156 inches Drawing Number: Drawing Revision: 60035 E


 

Some Part number from the same manufacture Sirenza
VCO190-640T High Performance Signal Source
VCO190-675T
VCO190-680T
VCO190-707U
VCO190-70T
VCO190-744T
VCO190-750U
VCO190-752T
VCO190-768U
VCO190-773T
VCO190-775T
VCO190-810T
VCO190-811U
VCO190-818T
VCO190-818U
VCO190-830X
VCO190-836T
VCO190-845T
VCO190-860T
VCO190-860U
VCO190-864T
Same catergory

BXO9311 : Frequency Range (MHz) = 550 - 850 ;; P1dB Comp Point (Typ/Min) (dBm) = 12 / 10 ;; Tuning Voltage (Min to Max) (V) = 0 to 12 ;; Phase Noise @ 100 KHZ (Typ) (dBc/Hz) = -100 ;; Harmonics (Typ/Max) (dBc) = -20 / -15 ;; DC Power (Typ) (V/mA) = 12 / 35 ;; Package = Package = Package = 4 Pin TO-8 Package = Surface Mount Package = Connectorized.

CDCV855 : . Data-Rate Synchronous DRAM Applications Spread Spectrum Clock Compatible Operating Frequency: 60 MHz to 180 MHz Low Jitter (cyc­cyc): ±50 ps Distributes One Differential Clock Input to Four Differential Clock Outputs Enters Low Power Mode and Three-State Outputs When Input CLK Signal Is Less Than 20 MHz or PWRDWN Is Low Operates From Dual 2.5-V Supplies.

CLV1320E : Package Style = MINI-14S ;; Frequency (MHz) = 1295 to 1335 ;; N@10KHz (dBc/Hz) = -113 ;; Tuning Voltage (Vdc) = 1.00 to 5.00 ;; Tuning Sensitivity (MHz/V) = 18 ;; Power (dBm) = 0.50 ± 3.50 ;; Op.temp ( C) = -40 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 27.

CSA309 : Crystal Oscillators. Frequency Range = 3.579545 KHZ to 4.000 MHZ ;; Frequency Stability = ±50 PPM ;; Dimensions Mm/inch = ±50 PPM ;;.

CX-49L : Crystal Oscillators. Frequency: 3.227 MHZ. ˇCrystal Unit for Automotive Equipment ˇMetal package, gull-wing type. ˇA resistance weld completely sealed type. ˇReflow is possible. Type Frequency Range Overtone Order Frequency Tolerance (at 25:) Frequency Tolerance (Over The Oper. Temp. Range) Operating Temp. Range Storage Temp. Range Motional Resistance Drive Level Load Capacitance Taping item.

CY2412 : Mpeg With Vcxo. Integrated phase-locked loop (PLL) Low-jitter, high-accuracy outputs VCXO with analog adjust 3.3V operation Benefits Highest-performance PLL tailored for multimedia applications Meets critical timing requirements in complex system designs Large ±150-ppm range, better linearity Enables application compatibility 13.5-MHz pullable crystal input per Two 27-MHz.

CY29942AC : High Performance Clock And Data Buffers Without PLL. 200-MHz clock support or 3.3V operation LVCMOS/LVTTL clock input LVCMOS-/LVTTL-compatible inputs 18 clock outputs: drive to 36 clock lines 200 ps max. output-to-output skew Output Enable control Pin compatible with MPC942C Available in Industrial and Commercial 32-pin LQFP package The is a low-voltage 200-MHz clock distribution buffer with an LVCMOS.

ICS9248-171 : Motherboards. AMDK7 System Clock. Recommended Application: ALI 1647 style chipset Output : 1 - Differential pair open drain CPU clocks 1 - Single-ended open drain CPU clock 13 - SDRAM 7 - PCI 2 - AGP 1 - REF @3.3V, (selectable strength) through I2C : to 147MHz frequency support Support power management: DG stop, PCI stop and Power down Mode from I2C programming. Spread spectrum for EMI control.

IMIZ9974CA : PLL Based Clock Distribution Device. Output Frequency to 125 MHz Supports PowerPC®, and Pentium® processors 15 Clock outputs: frequency configurable Two Reference clock inputs for dynamic toggling Output Three-State control Spread spectrum compatible 3.3V power supply Pin compatible with MPC974 Industrial temperature range: +85°C 52-pin TQFP package The Z9974 integrates PLL technology.

MK2704 : General Purpose PLL. PLL Audio Clock Synthesizer. The is a low cost, low jitter, high performance PLL clock synthesizer designed to replace oscillators and PLL circuits in set-top box and multimedia systems. Using ICS' patented analog Phase Locked Loop (PLL) techniques, the device uses a 27 MHz crystal or clock input to produce a buffered reference clock and a selectable audio clock. The audio clock.

MQF21.4-1500/33 : Monolithic Crystal Filter (MCF). Pole No. = 10 ;; Loss /dB = 4.0 ;; Passband /dB = 6.0 ;; Passband /±kHz = 7.50 ;; Ripple /dB = 2.0 ;; Ripple /±kHz = 6.2 ;; Stopband /dB = 50 ;; Stopband /±kHz = Dez 50 ;; Stopband /dB = 80 ;; Stopband /±kHz = 17.50 ;; Impedance R/ohm = 1500 ;; Impedance C/pf = 1.00 ;; Remarks =   ;; Case.

SX2060 : Crystal Oscillators. Technology = SMT ;; Package = 4.8 X 12.5 X 3.7 MM ;; Frequency = 3.500 to 70.000 MHZ.

SY89876L : Clock Divider/Generator. 3.3V 2.0GHz Any Diff, In-to-lvds Programmable Clock Divider And 1:2 Fanout Buffer W/internal Termination.

TFS130A : SAW Devices (Surface Acoustic Wave). Application = Wireless Communication ;; Center Frequency = 130.38 MHZ ;; 3 DB = 1330 KHZ ;; Pass Band Ripple = 1,0dB ;; Insertion Loss = 8,0dB ;; Group Delay Ripple =   ;; Package = 7 MM X 5 MM LCC.

V674ME03 : Package Style = MINI-14S-L ;; Frequency (MHz) = 1430 to 1930 ;; N@10KHz (dBc/Hz) = -94 ;; Tuning Voltage (Vdc) = 2.00 to 9.00 ;; Tuning Sensitivity (MHz/V) = 103 ;; Power (dBm) = 5.00 ± 3.00 ;; Op.temp ( C) = -40 to 85 ;; VCC (Vdc) = 10.00 ;; Icc (mA) = 35.

V800ME09 : Package Style = MINI-14H-L ;; Frequency (MHz) = 2270 to 2330 ;; N@10KHz (dBc/Hz) = -98 ;; Tuning Voltage (Vdc) = 0.70 to 4.20 ;; Tuning Sensitivity (MHz/V) = 52 ;; Power (dBm) = 4.00 ± 3.00 ;; Op.temp ( C) = -40 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 15.

X352A : Crystal Oscillator 8.000000mhz.

ICS252 : Field Programmable Dual Output SS VersaClock Synthesizer The ICS252 is a low cost, dual-output, field programmable clock synthesizer. The ICS252 can generate two output frequencies from 314 kHz to 200 MHz using up to two independently configurable PLLs. The outputs may employ Spread Spectrum techniques to reduce system electro-magnetic interference.

MAX3676 : 622Mbps, 3.3V Clock-Recovery And Data-Retiming IC With Limiting Amplifier The MAX3676 is a complete clock-recovery and data-retiming IC incorporating a limiting amplifier. It is intended for 622Mbps SDH/SONET applications and operates from a single +3.3V supply. The MAX3676 is designed for both section-regenerator and terminal-receiver applications.

MAX31C80 : Spread-Spectrum Clock Generators The MAX31C80/MAX31D80 are spread-spectrum clock generators that contain a phase-locked loop (PLL) that generates a 2MHz to 134MHz clock from an input clock or crystal. The PLL can provide a spread-spectrum down-dithered (MAX31D80) or center-dithered (MAX31C80) frequency-modulated clock. The devices also buffer the incoming.

 
0-C     D-L     M-R     S-Z