Details, datasheet, quote on part number: VCO190-707U
PartVCO190-707U
CategoryTiming Circuits => Oscillators => VCO (Voltage Controlled Oscillators)
DescriptionHigh Performance Signal Source
CompanySirenza
DatasheetDownload VCO190-707U datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Model: VCO190-707U Rev: A Date: 4/22/2003 Customer: VARI-L COMPANY Operating Temperature Range: C)

Parameter Frequency Range Tuning Voltage: 695 MHz 720 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 5.4-6.0 V Frequency Pulling dB RL Tuning Port Capacitance Output Impedance -

Package Information Package Type: Dimensions: x 0.13 inches Drawing Number: Drawing Revision: 60036 E


 

Some Part number from the same manufacture Sirenza
VCO190-70T High Performance Signal Source
VCO190-744T
VCO190-750U
VCO190-752T
VCO190-768U
VCO190-773T
VCO190-775T
VCO190-810T
VCO190-811U
VCO190-818T
VCO190-818U
VCO190-830X
VCO190-836T
VCO190-845T
VCO190-860T
VCO190-860U
VCO190-864T
VCO190-880T
VCO190-882U
VCO190-884T
VCO190-888T
Same catergory

AN8539SH : 300 Mhz-band Single PLL ic. The a 300 MHz-band, 2nd local OSC PLL IC designed for a cellular phone which allows IF switching to high or low. To be switched to two frequencies. (Select by SELECT pin.) Analog SW built-in ICC 900 A Pin No. Symbol CPSUB CP GND IFIN PS SW VCC REF SELECT LD Sub charge pump output Charge pump output GND pin IF input Power save control Sub charge pump.

CDC2536DBR : PLL-Based Synthesizers. ti CDC2536, 3.3V PLL Clock Driver With 1/2x, 1x And 2x Frequency Options.

CY24126 : Mediaclock For LCD Projectors. Integrated phase-locked loop Low jitter, high accuracy outputs 3.3V operation 8-pin SOIC package Part Number CY24126 Outputs 2 Input Frequency 24 MHz Benefits High-performance PLL tailored for projector applications Meets critical timing requirements in complex system designs Enables application compatibility Industry standard package saves on board.

H13K : Crystal Oscillators. Frequency Range = 14.000 MHZ to 90.000 MHZ ;; Frequency Stability = ±50 PPM ;; Dimensions Mm/inch = ±50 PPM ;;.

HS-1200 : XO TTL Oscillators. Thru-hole Leaded 4 Pin (14 PIN) Frequency Range (Mhz) : 0.5 - 36.0 Output/input : Enable/Disable, 3 State, Compatible, 5V.

MPC972 : Clock Circuits. Low Voltage PLL Clock Driver. The MPC972/973 are 3.3V compatible, PLL based clock driver devices targeted for high performance CISC or RISC processor based systems. With output frequencies to 125MHz and skews of 550ps the MPC972/973 are ideally suited for most synchronous systems. The devices offer twelve low skew outputs plus a feedback and sync output for added flexibility and ease.

MQF70.0-1500/07 : Monolithic Crystal Filter (MCF). Pole No. = 4 ;; Loss /dB = 2.0 ;; Passband /dB = 3.0 ;; Passband /±kHz = 7.50 ;; Ripple /dB = 1.0 ;; Ripple /±kHz = 6.0 ;; Stopband /dB = 40 ;; Stopband /±kHz = 30.00 ;; Stopband /dB = 70 ;; Stopband /±kHz =   ;; Impedance R/ohm = 3000 ;; Impedance C/pf = -0.50 ;; Remarks =   ;; Case.

PLL202-01 : Ali, Via, Sis, Intel 440BX Chipset FTGS , Freq. Progr., Power Mgt, SST.

RO2150 : SAW Resonators. Frequency = 304.0 ;; = Resonator. Ideal for 304.0 MHz Transmitters Very Low Series Resistance Quartz Stability Rugged, Hermetic, Low-Profile TO39 Case The is a true one-port, surface-acoustic-wave (SAW) resonator in a low-profile TO39 case. It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency oscillators operating at 304.0 MHz. The RO2150 is designed.

TFS246KC : SAW Devices (Surface Acoustic Wave). Application = Gsm,dcs,pcs ;; Center Frequency = 246.0 MHZ ;; 3 DB = 180 KHZ ;; Pass Band Ripple =   ;; Insertion Loss = 7.0dB ;; Group Delay Ripple = 1.2µs ;; Package = 9 MM X 7 MM LCC.

V580ME09 : Package Style = MINI-16-L ;; Frequency (MHz) = 805 to 825 ;; N@10KHz (dBc/Hz) = -110 ;; Tuning Voltage (Vdc) = 0.50 to 4.50 ;; Tuning Sensitivity (MHz/V) = 43 ;; Power (dBm) = 5.50 ± 2.00 ;; Op.temp ( C) = -30 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 18.

W238-02H : Frequency Timing Generators For PC And Server Motherboards. Maximized EMI suppression using Cypress's Spread Spectrum technology Low jitter and tightly controlled clock skew Highly integrated device providing clocks required for CPU, core logic, and SDRAM Two copies of CPU clock at 66/100/133 MHz Thirteen copies of SDRAM clocks at 100/133 MHz Five copies of PCI clock compliant to PCI spec 2-1 and capable of driving.

R2023K : Real Time Clock The R2023K/T is a CMOS real-time clock IC connected to the CPU by two signal lines, SCL, SDA, and configured to perform serial transmission of time and calendar data to the CPU. The periodic interrupt circuit is configured to generate interrupt signals with six selectable interrupts ranging from 0.5 seconds to 1 month. The 2 alarm interrupt.

CDCE421 : The CDCE421 is a high-performance, low-phase-noise clock generator. It has two fully integrated, low-noise, LC-based voltage controlled oscillators (VCOs) that operate in the 1.750-GHz-2.350-GHz frequency range. It has an integrated crystal oscillator that operates in conjunction with an external AT-cut crystal to produce a stable frequency reference.

DS1307 : 64 X 8, Serial, IC Real-Time Clock The DS1307 serial real-time clock (RTC) is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially through an IC, bidirectional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month.

M41T11 : Serial Real-Time Clocks Datasheet Serial real-time clock with 56 bytes of NVRAM.

 
0-C     D-L     M-R     S-Z