Details, datasheet, quote on part number: VCO190-818T
PartVCO190-818T
CategoryTiming Circuits => Oscillators => VCO (Voltage Controlled Oscillators)
DescriptionHigh Performance Signal Source
CompanySirenza
DatasheetDownload VCO190-818T datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Model: VCO190-818T Rev: A Date: 4/22/2003 Customer: VARI-L COMPANY Operating Temperature Range: ° C)

Parameter Frequency Range Tuning Voltage: 805 MHz 830 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 4.9-5.1 V Frequency Pulling dB RL Tuning Port Capacitance Output Impedance -

Package Information Package Type: Dimensions: x 0.156 inches Drawing Number: Drawing Revision: 60035 E


 

Some Part number from the same manufacture Sirenza
VCO190-818U High Performance Signal Source
VCO190-830X
VCO190-836T
VCO190-845T
VCO190-860T
VCO190-860U
VCO190-864T
VCO190-880T
VCO190-882U
VCO190-884T
VCO190-888T
VCO190-900T
VCO190-902T
VCO190-915T
VCO190-926T
VCO190-935X
VCO190-938T
VCO190-940T
VCO190-943U
VCO190-945T
VCO190-947T
Same catergory

CLV1085E : Package Style = MINI-14S-L ;; Frequency (MHz) = 1050 to 1086 ;; N@10KHz (dBc/Hz) = -112 ;; Tuning Voltage (Vdc) = 0.50 to 4.50 ;; Tuning Sensitivity (MHz/V) = 21 ;; Power (dBm) = -1.50 ± 2.50 ;; Op.temp ( C) = -40 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 20.

CX-96F : Crystal Oscillators. Frequency: 12120 MHZ. ˇCrystal Unit for Radio & Mobile Communication Systems. ˇCompact, thin. (4.9×3.1×0.7mm) ˇCeramic package. ˇA full lead-free product. ˇReflow is possible. Type Frequency Range Overtone Order Frequency Tolerance (at 25:) Frequency Tolerance (Over The Oper. Temp. Range) Operating Temp. Range Storage Temp. Range Motional Resistance Drive Level Load Capacitance.

CY2DP3120 : Backplane Interface. High Performance Clock Distribution Device. Twenty ECL/PECL differential outputs Two ECL-/PECL-/HSTL-compatible differential clock inputs Hot-swappable/-insertable 50-ps output-to-output skew 500-ps device-to-device skew Less than 10-ps intrinsic jitter < 500-ps propagation delay (typical) Operation from to 1.5 GHz PECL mode supply range: VCC to 3.465V with VEE = 0V ECL mode supply range:.

ICS93716 : Zero Delay Fanout. Zerodelay With Iic. Low Cost DDR Phase Lock Loop Clock Driver Recommended Application: DDR Clock Driver Product / : Low skew, low jitter PLL clock driver I2C for functional and output control Feedback pins for input to output synchronization Spread Spectrum tolerant inputs Switching Characteristics: PEAK - PEAK jitter (66MHz): <120ps PEAK - PEAK jitter (>100MHz):.

K3500G : Package = 8 Pin MTL Dil ;; Frequency = 1.000 to 70.000 MHZ ;; Output Logic = CMOS ;; Supply Voltage = 3.3V.

LMX1600 : Dual Integer PLLs. LMX1600 - 2.0 GHz/500 MHZ Pllatinum Low Cost Dual Frequency Synthesizer, Package: Laminate Csp, Pin Nb=16.

M908-02 : SAW-Based clock modules. Vcso-based Clock Generator. The is a PLL (Phase Locked Loop) based clock generator that uses an internal VCSO (Voltage Controlled SAW Oscillator) to produce a very low jitter output clock. From the M908-02-155.5200, an output clock frequency 155.52MHz is provided from eight LVPECL clock output pairs. (Other frequencies are available; consult factory.) The accuracy of the output.

MK41T56 : RTC/RAM Combo. 512b (x8), 5V 10%, I2C Serial Bus, 500nA, Industrial Temperature Range.

MQF172.5-1200/01 : Monolithic Crystal Filter (MCF). Pole No. = 2 ;; Loss /dB = 3.0 ;; Passband /dB = 1.0 ;; Passband /±kHz = 6.00 ;; Ripple /dB = 0.0 ;; Ripple /±kHz = 6.0 ;; Stopband /dB = 20 ;; Stopband /±kHz = 50.00 ;; Stopband /dB = 20 ;; Stopband /±kHz =   ;; Impedance R/ohm = 700 ;; Impedance C/pf = -0.70 ;; Remarks =   ;; Case.

SF1082A : SAW Resonators. Frequency = 125.0 ;; = Filter, Gsm/pcs Transmitter if.

SMV5300L : Package Style = Sub-l ;; Frequency (MHz) = 5220 to 5420 ;; N@10KHz (dBc/Hz) = -81 ;; Tuning Voltage (Vdc) = 0.50 to 4.50 ;; Tuning Sensitivity (MHz/V) = 185 ;; Power (dBm) = 3.00 ± 3.00 ;; Op.temp ( C) = -30 to 75 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 26.

V842ME02 : Package Style = MINI-14H ;; Frequency (MHz) = 3110 to 3320 ;; N@10KHz (dBc/Hz) = -92 ;; Tuning Voltage (Vdc) = 2.00 to 10.00 ;; Tuning Sensitivity (MHz/V) = 48 ;; Power (dBm) = 7.00 ± 2.00 ;; Op.temp ( C) = -30 to 70 ;; VCC (Vdc) = 8.00 ;; Icc (mA) = 25.

W238H : Frequency Timing Generators For PC And Server Motherboards. Maximized EMI suppression using Cypress's Spread Spectrum technology Low jitter and tightly controlled clock skew Highly integrated device providing clocks required for CPU, core logic, and SDRAM Two copies of CPU clock at 66/100/133 MHz Thirteen copies of SDRAM clocks at 100/133 MHz Five copies of PCI clock compliant to PCI spec 2-1 and capable of driving.

HMC511LP5 : General Functional Diagram The HMC511LP5 & HMC511LP5E are GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCOs. The HMC511LP5 & HMC511LP5E integrate resonators, negative resistance devices, varactor diodes and feature a half frequency output. The VCO’s phase noise performance is excellent over temperature, shock, and process due to the oscillator’s.

 
0-C     D-L     M-R     S-Z