Details, datasheet, quote on part number: VCO190-938T
CategoryTiming Circuits => Oscillators => VCO (Voltage Controlled Oscillators)
DescriptionHigh Performance Signal Source
DatasheetDownload VCO190-938T datasheet
Find where to buy


Features, Applications

Model: VCO190-938T Rev: B Date: 4/22/2003 Customer: VARI-L COMPANY Operating Temperature Range: ° C)

Parameter Frequency Range Tuning Voltage: 925 MHz 951 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 4.75-5.25 V Frequency Pulling dB RL Tuning Port Capacitance Output Impedance -

Package Information Package Type: Dimensions: x 0.156 inches Drawing Number: Drawing Revision: 60035 E


Some Part number from the same manufacture Sirenza
VCO190-940T High Performance Signal Source

AY03L : 3dB Hybrid Coupler

PLL400-2450 : High Performance Signal Source

QPP-012 :

QPP-020 :

VCO-119 : Hi-rel Vco

SZP-2026 : Sirenza Microdevices’ SZP-2026Z is a high linearity single stage class AB Heterojunction Bipolar Transistor (HBT) amplifier housed in a proprietary surface-mountable plastic encapsulated package. This HBT amplifier is made with InGaP on GaAs device technology and fabricated with MOCVD for an id

PLL400-875Y : PLL Product Specification

VCO190-450TY : VCO Product Specification

Same catergory

ASR314.5 : Crystal Oscillators. One-port 314.5 MHZ Leaded, To-39 Package 8/2002. One-port SAW resonator 314.5 MHz. Fundamental mode. Wide operating temperature range. Quartz frequency stabilization of fixed-frequency transmitters at 314.5 MHz. Wireless car alarm, Garage door opener. (RKE) 0.12 min. Mobile communications systems (3.0) DC voltage Operating temperature Maximum power dissipation ± 30 Vdc 0.1 (2.54) Center frequency.

CGS74CT2526 : General Purpose/. 1-to-8 Minimum Skew Clock Driver (obsolete). The CGS is a minimum skew clock driver with one input driving eight outputs specifically designed for signal generation and clock distribution applications The '2525 is designed to distribute a single clock to eight separate receivers with low skew across all outputs during both the tPLH and tPHL transitions The '2526 is similar to the '2525 but contains.

CY29942AC : High Performance Clock And Data Buffers Without PLL. 200-MHz clock support or 3.3V operation LVCMOS/LVTTL clock input LVCMOS-/LVTTL-compatible inputs 18 clock outputs: drive to 36 clock lines 200 ps max. output-to-output skew Output Enable control Pin compatible with MPC942C Available in Industrial and Commercial 32-pin LQFP package The is a low-voltage 200-MHz clock distribution buffer with an LVCMOS.

F1535A : Package = 9 X 14 MM FR-4 ;; Frequency = 52.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt.

FMB : Quartz Crystals. 6 X 3.5mm Ceramic Seam Sealed SMD. Fundamental to 40 MHz Seam Sealed Tape and Reel (2,000 pcs. STD) Pb Free OPTIONS PARAMETERS Frequency Range Frequency Stability Over Operating Temp Range Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (Co) Load Capacitance (CL) Drive Level Aging per year MAX (unless otherwise noted) ~ 67.000 MHz ±100 PPM pF ~ Series (Customer Specified).

H200 : Crystal Oscillators. Frequency Range = 3.500 MHZ to 30.000 MHZ ;; Frequency Stability = ±30/±50 PPM ;; Dimensions Mm/inch = ±30/±50 PPM ;;.

ICS9169C-271 : Frequency Generator For Pentium(tm) Based Systems. The is a low-cost frequency generator designed specifically for Pentium based chip set systems. The integrated buffer minimizes skew and provides all the clocks required. A 14.318 MHz XTAL oscillator provides the reference clock to generate standard Pentium frequencies. The CPU clock makes gradual frequency transitions without violating the PLL timing.

MTCVO11 : TCXO/TCVCXO. Package = 13.1 X 11.7 X 4.0 MM ;; Frequency = 12.000 to 20.000 MHZ ;; Output Logic = Clipped Siave ;; Supply Voltage = 3.0 or 5.0 Volt.

PCA1465U : 32 KHZ Watch Circuits With Adaptive Motor Pulse. PCA146x series 32 kHz watch circuits with adaptive motor pulse Product Supersedes data of 1998 Mar 18 File under Integrated Circuits, IC16 1998 Apr 21 32 kHz watch circuits with adaptive motor pulse 32 kHz oscillator, amplitude regulated with excellent frequency stability High immunity of the oscillator to leakage currents Time calibration electrically.

PI6C9910-5 : Clock Circuits. 100 Mhz, 8 Output Zero-delay PLL Clock Driver, TLL Outputs.

PLL501-05 : , 35.328MHz Out, 13.248MHz Parallel Xtal. Integrated voltage-controlled crystal oscillator circuitry (VCXO) (pull range 200ppm minimum). Ideal for ADSL (35.328MHz and 70.656MHz). VCXO tuning range: - 3.3V. Integrated phase-locked loop (PLL) provides pullable output at 35.328MHz (for PLL501-05) and 70.656MHz (for PLL501-07) with a 13.248MHz low cost parallel resonant crystal. Accepts fundamental-mode.

SK2200 : Lvpecl/hstl to HSTL 1:9 High-speed Transceiver Logic Bus Clock Driver.

TFH70F : SAW Devices (Surface Acoustic Wave). Application = Routers, LMDS ;; Center Frequency = 70.0 MHZ ;; 3 DB = 1.156 MHZ ;; Pass Band Ripple = 0.65 DB ;; Insertion Loss = 24.0dB ;; Group Delay Ripple = 175ns ;; Package = 24 MM X 9 MM LCC.

TFS70E : SAW Devices (Surface Acoustic Wave). Application = Wireless Communication ;; Center Frequency = 70.2 MHZ ;; 3 DB = 700 KHZ ;; Pass Band Ripple =   ;; Insertion Loss = 7.0dB ;; Group Delay Ripple = 350ns ;; Package = 14 MM X 8 MM LCC.

TVXO016730 : Crystal Oscillator SMD 12.800000mhz.

VXM5 : Crystal Oscillators. 4.9 X 3.1 MM Ultra Miniature 4 Pads SMD. STD Calibration Tolerance: ESR: Shunt Capacitance (Co): Drive Level: Aging: Reflow: Standard Packaging: Typical P/N: .

MAX9312 : Dual 1:5 Differential LVPECL/LVECL/HSTL Clock And Data Drivers The MAX9312/MAX9314 are low skew, dual 1-to-5 differential drivers designed for clock and data distribution. These devices accept two inputs. Each input is reproduced at five differential outputs. The differential inputs can be adapted to accept single-ended inputs by connecting the on-chip.

0-C     D-L     M-R     S-Z