Details, datasheet, quote on part number: VCO191-864U
PartVCO191-864U
CategoryTiming Circuits => Oscillators => VCO (Voltage Controlled Oscillators)
DescriptionHigh Performance Signal Source
CompanySirenza
DatasheetDownload VCO191-864U datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Model: VCO191-864U Rev: C Date: 4/21/2003 Customer: VARI-L COMPANY Operating Temperature Range: ° C)

Parameter Frequency Range Tuning Voltage: 851 MHz 877 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 2.85-3.15 V Frequency Pulling dB RL Tuning Port Capacitance Output Impedance -

Package Information Package Type: Dimensions: x 0.13 inches Drawing Number: Drawing Revision: 60036 E


 

Some Part number from the same manufacture Sirenza
VCO191-888U High Performance Signal Source
VCO191-890U
VCO191-915U
VCO191-915W
VCO191-920U
VCO191-926U
VCO191-926X
VCO191-947U
VCO191-950U
VCO191-964U
VCO191-967X
VCO191-985U
VCO690-3100T
VCO690-3300T
VCO690-4300T
VCO690-4450T
VCO690-4790T
VCO690-5250T
VCO790-1500T
VCO790-2300T
VCO790-600T
Same catergory

AD53020 : DESKEW: a Four-channel Delay Line Designed For Use in Automatic Test Equipment And Digital Logic Systems.

AWSZT_MD : Crystal Oscillators. Automotive Without Built-in Cap -40° +85°C.

BXO9009 : Frequency Range (MHz) = 100 - 150 ;; P1dB Comp Point (Typ/Min) (dBm) = 10 / 7 ;; Tuning Voltage (Min to Max) (V) = 1 to 15 ;; Phase Noise @ 100 KHZ (Typ) (dBc/Hz) = -125 ;; Harmonics (Typ/Max) (dBc) = -12 / -8 ;; DC Power (Typ) (V/mA) = 10 / 9.5 ;; Package = Package = Package = 4 Pin TO-8 Package = Surface Mount Package = Connectorized.

CDC516DGGR : PLL-Based Clock Buffers (Zero-Delay). ti CDC516, 3.3V Phase Lock Loop Clock Driver With 3-State Outputs.

CDCV857BDGG : PLL-Based Clock Buffers (Zero-Delay). ti CDCV857B, 2.5 V Phase Lock Loop DDR Clock Driver.

CRO2273A : Package Style = MINI-16 ;; Frequency (MHz) = 2240 to 2306 ;; N@10KHz (dBc/Hz) = -110 ;; Tuning Voltage (Vdc) = 0.50 to 4.50 ;; Tuning Sensitivity (MHz/V) = 22 ;; Power (dBm) = 0.00 ± 2.00 ;; Op.temp ( C) = -10 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 20.

CSP2510C : 3.3V Phase-lock Loop Clock Driver. 3.3V PHASE-LOCK LOOP CLOCK DRIVER ZERO DELAY BUFFER Phase-Lock Loop Clock Distribution for Synchronous DRAM Applications Distributes one clock input to one bank of ten outputs Output enable bank control External feedback (FBIN) pin is used to synchronize the outputs to the clock input signal No external RC network required for PLL loop stability Operates.

CY2CC810OC : Backplane Interface. High Performance Clock And Data Buffers With Low Voltage Operations.

FMXFU : Monolithic Crystal Filters. Thru-hole 2 Pole & 4 Pole UM-1 & UM-5, 3-Lead.

MC100H642FNR2 : Divider. Ecl/ttl Clock Driver, Package: Plcc, Pins=28. The MC10H/100H642 generates the necessary clocks for the 68030, 68040 and similar microprocessors. It is guaranteed to meet the clock s required by the 68030 and 68040 in terms of part­to­part skew, within­part skew and also duty cycle skew. The user has a choice of using either TTL or PECL (ECL referenced to +5.0V) for the input clock. TTL clocks are typically.

MK2761 : Application Specific PLL. Set-top Clock Source. The is a low cost, low jitter, high performance clock synthesizer designed for set-top boxes. Using analog Phase-Locked Loop (PLL) techniques, the device accepts a 27.00MHz crystal or clock input to produce multiple output clocks including the processor clock, the UART clock, a selectable audio clock, and four low skew copies of the 27MHz. The audio.

MQF21.4-1500/05 : Monolithic Crystal Filter (MCF). Pole No. = 10 ;; Loss /dB = 4.0 ;; Passband /dB = 6.0 ;; Passband /±kHz = 7.50 ;; Ripple /dB = 2.0 ;; Ripple /±kHz = 6.0 ;; Stopband /dB = 75 ;; Stopband /±kHz = 16.00 ;; Stopband /dB = 90 ;; Stopband /±kHz = 18.00 ;; Impedance R/ohm = 1500 ;; Impedance C/pf = 2.00 ;; Remarks =   ;; Case.

MQF42.2-0800/02 : Monolithic Crystal Filter (MCF). Pole No. = 4 ;; Loss /dB = 3.0 ;; Passband /dB = 1.0 ;; Passband /±kHz = 4.00 ;; Ripple /dB = 0.0 ;; Ripple /±kHz = 4.0 ;; Stopband /dB = 60 ;; Stopband /±kHz = 25.00 ;; Stopband /dB = 80 ;; Stopband /±kHz = -40 ;; Impedance R/ohm = 50 ;; Impedance C/pf = 0.00 ;; Remarks = Tg<50µs;fo±4.

PLL620-80 : XO crystal oscillators. , Low Phase Noise xo (for 27-65MHz Fund.). Low Phase Noise XO (for 27-65MHz Fund. 3 rd O.T. Crystals) to 65MHz Fundamental 3 rd overtone Crystal. Output range: ­ 65MHz (no PLL). Complementary outputs: CMOS, PECL or LVDS. Selectable OE Logic (enable high or enable low). Integrated variable capacitors. Supports 3.3V-Power Supply. Available in die form. Thickness 10 mil. XO IC specifically designed.

PLL800-5250 : High Performance Signal Source. Model: PLL800-5250 Rev: C Date: 4/17/2003 Customer: VARI-L COMPANY Operating Temperature Range: AppNote: 112, Opt. ° C) Parameter Frequency Range Step Size Settling Time - To within 1.0 kHz Output Power Output Phase Noise: 1 kHz 10 kHz 100 kHz Power Supply Current Spurious Product - 1000 kHz Reference Feedthrough Harmonic Suppression: 2nd Harmonic 3rd Harmonic.

RO2101C : SAW Resonators. Frequency = 433.92 ;; = Resonator. Ideal for European 433.92 MHz Transmitters Very Low Series Resistance Quartz Stability The is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount, ceramic case. It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency transmitters operating at 433.92 MHz. This SAW is designed specifically for remote-control.

V640ME01 : Package Style = MINI-14S ;; Frequency (MHz) = 2079 to 2081 ;; N@10KHz (dBc/Hz) = -101 ;; Tuning Voltage (Vdc) = 0.50 to 4.50 ;; Tuning Sensitivity (MHz/V) = 16 ;; Power (dBm) = 4.00 ± 3.00 ;; Op.temp ( C) = -40 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 34.

VCO190-882U : High Performance Signal Source. Model: VCO190-882U Rev: A Date: 4/22/2003 Customer: VARI-L COMPANY Operating Temperature Range: ° C) Parameter Frequency Range Tuning Voltage: 869 MHz 894 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 4.75-5.25 V Frequency.

W152 : Clock Circuits. Spread Aware , Eight Output Zero Delay Buffer. Spread AwareTM, Eight Output Zero Delay Buffer Spread AwareTM--designed to work with SSFTG reference signals Two banks of four outputs each Configuration options to halve, double, or quadruple the reference frequency refer to Table 1 to determine the specific option which meets your multiplication needs Outputs may be three-stated Available in 16-pin.

X1240 : Clock Circuits. Real Time Clock/calendar And I2c Serial EePROM. 2-wire interface interoperable with I2C --400kHz data transfer rate Secondary power supply input with internal switch-over circuitry 2Kbytes of EEPROM --64-byte page write mode --3-bit Block LockTM protection Low power CMOS --<1ľA operating current --<3mA active current during program --<400ľA active current during data read Single byte write.

 
0-C     D-L     M-R     S-Z