Details, datasheet, quote on part number: VCO191-967X
PartVCO191-967X
CategoryTiming Circuits => Oscillators => VCO (Voltage Controlled Oscillators)
DescriptionHigh Performance Signal Source
CompanySirenza
DatasheetDownload VCO191-967X datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Model: VCO191-967X Rev: B Date: 4/21/2003 Customer: VARI-L COMPANY Operating Temperature Range: C)

Parameter Frequency Range Tuning Voltage: 954 MHz 980 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing - 2.85-3.15 Frequency Pulling dB RL Tuning Port Capacitance Output Impedance -

Package Information Package Type: Dimensions: 1.72 mm Drawing Number: Drawing Revision: 60870 B

 

Some Part number from the same manufacture Sirenza
VCO191-985U High Performance Signal Source
VCO690-3100T
VCO690-3300T
VCO690-4300T
VCO690-4450T
VCO690-4790T
VCO690-5250T
VCO790-1500T
VCO790-2300T
VCO790-600T
VCO793-1500T
VCO793-1550T
VCO793-2300T
VS-100 Solid State Switch
VS-101-S
VS-20
VS-21
VS-22
VS-23
VS-25
XD010-12S 869-894 MHZ Class ab 10 Watt Power Amplifier Module
Same catergory

85311AM : . 2 differential 2.5V/3.3V LVPECL / ECL outputs 1 CLK, nCLK input pair CLK, nCLK pair can accept the following differential input levels: LVDS, LVPECL, LVHSTL, SSTL, HCSL Maximum output frequency: 1GHz Translates any single ended input signal to 3.3V LVPECL levels with resistor bias on nCLK input Output skew: 15ps (maximum) Part-to-part skew: 100ps (maximum).

ABM9 : Crystal Oscillators. 4.0 X 2.5 X 0.8 MM Ceramic Seam Sealed 13MHz to 32MHz.

AD9500 : -. 10 ps Delay Resolution 10 s Full-Scale Range Fully Differential Inputs Separate Trigger and Reset Inputs Low Power mW MIL-STD-883 Compliant Versions Available APPLICATIONS ATE Pulse Deskewing Arbitrary Waveform Generators High Stability Timing Source Multiple Phase Clock Generators DIFFERENTIAL ANALOG INPUT STAGE ECL VOLTAGE REFERENCE TIMING CONTROL.

CY2LL8422OC : Backplane Interface. High Performance Clock And Data Buffers With Low Voltage Operations.

FMTC51 : Thru-hole Hcmos/ttl or Siave 5.0 VDC 5.0 VDC. 5.0 Vdc Supply Voltage HCMOS/TTL Compatible Clipped Sinewave Tight Stability Over Temp. S Parameter Frequency Range Frequency Adjustment Range Frequency Stability vs. Temp Frequency Stability vs. Input V. Frequency Stability vs. Load Frequency Stability vs. Aging Storage Temperature Supply Voltage (Vdd) Supply Current (Icc) Symmetry (Duty Cycle) Output.

HMMC-3108 : Prescalers/Dividers->RF. SO-8 SMT 0.5-16 GHZ GAAS HBT Prescalers. - 7" diameter reel/500 each HMMC-3108-BLK - Bubble strip/10 each Data Sheet Wide Frequency Range: 0.216 GHz High Input Power Sensitivity: On-chip pre- and post-amps to +10 dBm (110 GHz) to +10 dBm (1012 GHz) to +5 dBm (1215 GHz) Pout: +6 dBm (0.99 Vp-p) will drive ECL Low Phase Noise: -153 dBc/Hz @ 100 kHz Offset or Single Supply Bias Operation.

LXO : Leaded Oscillators. CMOS Compatible 5V or 12V Low Current High Accuracy And Stability;; Package = 4-pin Dip.

MQF10.7-3000/05 : Monolithic Crystal Filter (MCF). Pole No. = 10 ;; Loss /dB = 4.0 ;; Passband /dB = 6.0 ;; Passband /±kHz = 15.00 ;; Ripple /dB = 2.0 ;; Ripple /±kHz = 12.0 ;; Stopband /dB = 70 ;; Stopband /±kHz = 30.00 ;; Stopband /dB = 90 ;; Stopband /±kHz = 45.00 ;; Impedance R/ohm = 5500 ;; Impedance C/pf = -1.00 ;; Remarks =   ;; Case.

NJU6350 : Serial I/o Real Time Clock. The is a serial I/O Real Time Clock suitable for 4 bits micro-processor. It contains quartz crystal oscillator, counter, shift register, voltage controller. The NJU6350 required only 3-port of microprocessor for data transfer, and the microprocessor can receive the data at any time when the microprocessor requires. The operating voltage is as wide to 5.5V,.

S473-A3 : Low Voltage Triple Line Leading Edge Control, CMOS Active. TRIPLE LINE LEADING EDGE CONTROL LOW VOLTAGE DELAY MODULES SMD Thru-Hole Time Delay 5 ns Tolerance ns Rise Time 3 ns Ein Trin PW PP Iccl Vcc Pulse Voltag Rise Time Pulse Width Pulse Period Supply Current Supply Voltage 3.0 Volts 1.2 x Total Delay 4 x Pulse Width 35 ma Typical 3.3 Volts Vcc Vih Vil Iik Ioh Iol Voh Vol Vik Iih Iil Icch Iccl d Tc Supply.

TFS400-1 : SAW Devices (Surface Acoustic Wave). Application = Gsm,dcs,pcs ;; Center Frequency = 400.0 MHZ ;; 3 DB = 280 KHZ ;; Pass Band Ripple =   ;; Insertion Loss = 6.5dB ;; Group Delay Ripple = 2.0µs ;; Package = 9 MM X 7 MM LCC.

TRF3750 : High Performance Integer-n PLL Frequency Synthesizerthe TRF3750 Frequency Synthesizer is Ideal For Designing The Local Oscillator Portion of Wireless Transceivers BY Providing Complete Programmability And Ultra-low Phase Noise. The Device a User-selectable Dualmodulus Prescaler, a 14-bit Reference (R) Divider, a 6-bit A, And a 13-bit B Counter. The R Divider.

VCO190-1525T : High Performance Signal Source. Model: VCO190-1525T Rev: B Date: 4/21/2003 Customer: VARI-L COMPANY Operating Temperature Range: C) Parameter Frequency Range Tuning Voltage: 1250 MHz 1800 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 7.75-8.25 V Frequency.

VXC5 : Crystal Oscillators. 7 X 5 X 1.1 MM 2 Pads. Package Options Standard Frequencies Mode Stability Options mm 2 pads Frequency Range 10 MHz to 100.00 MHz See Standard Frequency Table 1 = Fundamental to 40 MHz) = 3rd Overtone to 100 MHz) = 100 PPM = 50 PPM = 30 PPM to +70C Equivalent Series 80 Maximum Resistance Shunt Capacitance Drive Level Crystal Aging Standard Packaging Typical P/N 7 pF Maximum.

DS4150 : DS4-XO Series Clock Oscillators The DS4125, DS4150, DS4155, DS4156, DS4160, DS4250, DS4300, DS4311, DS4312, DS4622, and DS4776 ceramic surface-mount crystal oscillators are part of Maxim\'s DS4-XO series of crystal oscillators. These devices offer output frequencies at 125MHz, 155.52MHz, 156.25MHz, 160MHz, 311.04MHz, 312.5MHz, 622.08MHz, and 77.76MHz.

HMC720LC3C : 13 Gbps Fast Rise Time 1:2 Fanout Buffer W/ Programmable Output Voltage The HMC720LC3C is a 1:2 Fanout Buffer designed to support data transmission rates up to 13 Gbps, and clock frequencies as high as 13 GHz. All differential inputs and outputs are DC coupled and terminated on chip with 50 Ohm resistors to ground. The outputs may be used in either.

 
0-C     D-L     M-R     S-Z