Details, datasheet, quote on part number: AA1101F
PartAA1101F
CategoryOptoelectronics => Display => LEDs => LED Lamps
DescriptionPKG Type = Right Angle ;; Emitted Color = Orange ;; Lens Type = Clear ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 1.5 ;; Luminous Intensity iv (mcd) TYP = 3.0 ;; Luminous Intensity iv (mcd) Max = 20 ;; Viewing Angle (2 θ 1/2) = 150
CompanyStanley Electric
DatasheetDownload AA1101F datasheet
Quote
Find where to buy
 
  

 

Features, Applications
Excellent for edge lighting LCDs and backlighting indicators
Computer / Telecommunications Industrial / Medical instrumentation Audio visual equipment
IF Peak p TYP. Spectral Line Dominant Half Width d TYP. IF
(Ta=25C) Yellow Green PY Green PG Pure Green V C mA/C

Power Dissipation Forward Current Peak Forward Current Reverse Voltage Operating Temperature Storage Temperature Derating* Pd IF IFM VR Topr Tstg IF BR

Please follow these handling precautions to prevent damage to the chip and ensure its reliability. 1. Soldering conditions: Soldering iron: Temperature at tip of iron: 280C max. (30W max.) Soldering time: 3 sec. max. Dip soldering: Preheating: ~ 150C max. (resin surface temp.) ~ 120 sec. max. Bath temperature: 260C max. Dipping Time: 5 sec. max. Reflow Soldering:

C Operation Heating 240 Temperature rise: 5C/sec. Cooling: --5C/sec. LED Surface Temperature

2. Cleaning: If cleaning is required, use the following solutions for less than 1 minute, at less than 40C. Appropriate chemicals: Ethyl alcohol and isopropyl alcohol. Effect of ultrasonic cleaning on the LED resin body differs depending on such factors as the oscillator output, size of PCB and LED mounting method. The use of ultrasonic cleaning should be enforced at proper output after confirming there is no problem. Product specifications subject to change without notice. PG1101F-0301

2660 Barranca Parkway, Irvine, CA 92606 Tel: 800-LED-LCD1 (533-5231) Fax: 949-222-0555 Website: www.stanley-electric.com


 

Related products with the same datasheet
AY1101F
BG1101F
BR1101F
PG1101F
PY1101F
Some Part number from the same manufacture Stanley Electric
AA1101W PKG Type = Standard Flat Lens (3216/1206) ;; Emitted Color = Orange ;; Lens Type = Clear ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 2.8 ;; Luminous Intensity iv (mcd)
AA1102W PKG Type = Standard Inner Lens (3216/1206) ;; Emitted Color = Orange ;; Lens Type = Clear ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 5.0 ;; Luminous Intensity iv (mcd)
AA1111C PKG Type = Ultra Compact (1608/0603) ;; Emitted Color = Orange ;; Lens Type = Diffused ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 2.0 ;; Luminous Intensity iv (mcd) TYP = 3.4 ;; Luminous
AA1111R PKG Type = Reverse Mount (3216/1206) ;; Emitted Color = Orange ;; Lens Type = Diffused ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 2.2 ;; Luminous Intensity iv (mcd) TYP = 3.7 ;; Luminous
AA1112H PKG Type = Thin(2012/0805) ;; Emitted Color = Orange ;; Lens Type = Diffused ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 2.2 ;; Luminous Intensity iv (mcd) TYP = 3.7 ;; Luminous
AA2202S PKG Type = 1.6 ;; Emitted Color = Orange ;; Lens Type = Clear ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 8.0 ;; Luminous Intensity iv (mcd) TYP = 16.0 ;; Luminous Intensity
AA2222S
AA3365S PKG Type = 3 ;; Emitted Color = Orange ;; Lens Type = Clear ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 2.0 ;; Luminous Intensity iv (mcd) TYP = 4.0 ;; Luminous Intensity
AA3822K PKG Type = 2x3 ;; Emitted Color = Orange ;; Lens Type = Clear ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 2.0 ;; Luminous Intensity iv (mcd) TYP = 4.0 ;; Luminous Intensity
AA3889S PKG Type = 3 ;; Emitted Color = Orange ;; Lens Type = Diffused ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 2.5 ;; Luminous Intensity iv (mcd) TYP = 5.0 ;; Luminous Intensity
AA5304S PKG Type = 5 ;; Emitted Color = Orange ;; Lens Type = Clear ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 30.0 ;; Luminous Intensity iv (mcd) TYP = 60.0 ;; Luminous Intensity
AA5305S
AA5307S
AA5334S PKG Type = 5 ;; Emitted Color = Orange ;; Lens Type = Diffused ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 8.0 ;; Luminous Intensity iv (mcd) TYP = 16.0 ;; Luminous Intensity
AA5335S
AA5351K PKG Type = 2x5 ;; Emitted Color = Orange ;; Lens Type = Diffused ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 1.2 ;; Luminous Intensity iv (mcd) TYP = 2.4 ;; Luminous Intensity
AA5362X PKG Type = 5 ;; Emitted Color = Orange ;; Lens Type = Clear ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 2.0 ;; Luminous Intensity iv (mcd) TYP = 4.0 ;; Luminous Intensity
AA5385X PKG Type = 5 ;; Emitted Color = Orange ;; Lens Type = Diffused ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 3.0 ;; Luminous Intensity iv (mcd) TYP = 6.0 ;; Luminous Intensity
AA7351K PKG Type = 2.4x7.2 ;; Emitted Color = Orange ;; Lens Type = Diffused ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 1.2 ;; Luminous Intensity iv (mcd) TYP = 2.4 ;; Luminous
AAA101
AABG4607K PKG Type = 2x4.5 ;; Emitted Color = Orange/pure Green ;; Lens Type = Clear ;; Peak Wavelength λ P (nm) = 605/555 ;; Luminous Intensity iv (mcd) Min = 3.0/2.0 ;; Luminous Intensity iv (mcd) TYP = 6.0/4.0
Same catergory

4N32 : Photodarlington Optocoupler. Very High Current Transfer Ratio, 500% Min. High Isolation Resistance, 1011 Typical Standard Plastic DIP Package Underwriters Lab File #E52744 V VDE Approvals #0884 (Available with Option 1) The 4N32 and 4N33 are optically coupled isolators with a Gallium Arsenide infrared LED and a silicon photodarlington sensor. Switching can be achieved while maintaining.

559-5501-001 : Red, Straight Terminals. 5mm LED Panel Mount Indicator High and Ultra Bright LEDs.250" Mounting Hole, Snap In Mounting BENEFITS Available with a variety of LEDs Designed for quick positive insertions in panels from.787mm [.031] through 1.57mm [.062] thick. Recommended hole size from 6.40mm [.252]. Front panel mounting Uniform illumination Snap-in mounting requires no additional.

AA4040NC : Material: GAASp/gap , Wavelength: 610nm. The Pure Orange source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Pure Orange Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. s are subject to change without notice. Note: 1/2 is the angle from optical centerline where the luminous intensity.

AA5335S : PKG Type = 5 ;; Emitted Color = Orange ;; Lens Type = Diffused ;; Peak Wavelength λ P (nm) = 605 ;; Luminous Intensity iv (mcd) Min = 10.0 ;; Luminous Intensity iv (mcd) TYP = 20.0 ;; Luminous Intensity iv (mcd) Max = 20 ;; Viewing Angle (2 θ 1/2) = 45.

AGM2416A : Graphic Modules. Outline Dimension = 74.6 X 56.1 X 5.5 ;; Viewing Area = 61.6 X 42.5 ;; Dot Size = 0.23 X 0.23 ;; Dot Pitch = 0.24 X 0.24 ;;.

AM27SURCK10 : Material: Ingaalp , Wavelength: 635nm. PACKAGE. The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. VIEWING ANGLE. ANGLE BEND. LIFE SOLID STATE RELIABILITY. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. s are subject to change.

APEKA3224SYC : Material: Ingaalp , Wavelength: 588nm. !3.2mmX2.4mm SMT LED, 2.4mm THICKNESS. !LOW POWER CONSUMPTION. !WIDE VIEWING ANGLE. !IDEAL FOR BACKLIGHT AND INDICATOR. ! VARIOUS !PACKAGE The Super Bright Yellow source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.0079") unless otherwise noted.

GP1UD280QK : Remote Control Receiver Modules. IR Remote Control Receiver.

LQ121S1DG41 : 12.1 Inch Color Tft-lcd Module.

LT0H49T : Laser Module->Consumer. Compact Hologram Laser. (1) Built-in high speed(TYP.30MHz) OPIC* for 16X speed CD-ROM drive (2) Enables to design compact pick-up thanks to compact package (Thickness: 4.8mm) (3) Voltage output type (Needless of external noise solution) (4) Low current operation type (Operating current : TYP. 36mA) Applications CD-ROM drives Model Name LT0H49L----Single power supply LT0H49T----Dual.

MTBL7412-UR : Red Led Backlight. Low Current Requirements High Light Output White Diffused Lens IC Compatible Characteristic Forward Current Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature Soldering Time Symbol IF VR Topr Tstg Tsol - Max. for 5 sec. max 1. Hand Solder Only; Do not exceed maximum ratings. 2. Use of alcohol based cleaners is not recommended.

MTN4456R-11A : Segment Displays. 0.56 Four Digit Display. 0.56" F our Digit Displa y Four Display FEA TURES Low Current Requirements Additional colors/materials available High Light Output IC Compatible PART NO. PEAK WAVE LENGTH (nm) FACE COLORS EMITTED COLOR VF(V) typ. max. @mA IR(A) max. @VR IV(mcd) typ. per seg. @mA Red Green Hi-Eff. Red Ultra Red Green Hi-Eff. Red Ultra Red Operating Temperature: -25~+85,.

MV942 : Solid State Led Lamps LCD Backlight Illuminator. Low power consumption Uniform lighting across entire bar NOTE: 1. Dimensions are in inches (mm). 2. Lead spacing is measured where the leads emerge from the package. 3. Protruded resin under the flange 1.5mm (0.059") max. 4. Tolerance +/-0.12" (0.3mm) unless otherwise noted. These right angle bar illuminators have two chips connected in series. They.

OED-LDP65001E : Laser Diodes Emitter, 650nm / Low Cost / 5mW.

SSF-LXH1071VLID : PC Led Vertical Mount Holder.

2191L1-24V : LED Panel Mount Indicators RED DIFFUSED 5/16" MOUNTING HOLE. s: Manufacturer: Chicago Miniature ; Product Category: LED Panel Mount Indicators ; RoHS:  Details ; LED Size: 8.64 mm ; Illumination Color: Red ; Lens Color/Style: Red ; Packaging: Bulk ; Forward Current: 24 mA ; Forward Voltage: 24 V ; Mounting Style: Panel ; Factory Pack Quantity:.

HDSP-G111 : 7-Segment Red 18-DIP (0.600", 15.24mm) 2 digit 0.40" (10.16mm) Display Modules - LED Character and Numeric; DISPLAY 7SEG 2DIG ALGAAS CA 0.4". s: Display Type: 7-Segment ; Color: Red ; Package / Case: 18-DIP (0.600", 15.24mm) ; Number of Digits/Alpha: 2 ; Size / Dimension: 0.90" L x 0.67" W x 0.24" H (22.86mm x 17.02mm x 6.10mm) ; Common Pin: Common.

SML-H12P8TT86 : Standard LEDs - SMD EXCELED™ series chip LED. ROHM Chip LEDs include compact, high power, side emitting and rear mount types in addition to the standard types. They feature high brightness and compact sizes for a variety of applications. s: Manufacturer: ROHM Semiconductor ; Product Category: Standard LEDs - SMD ; Illumination Color: Green ; Wavelength/Color.

 
0-C     D-L     M-R     S-Z