Details, datasheet, quote on part number: XYG1SMR18D
PartXYG1SMR18D
CategoryOptoelectronics => Display => LEDs
DescriptionMaterial (Color) = GaAlAs(Red);; Lens = Red Diffused;; Peak Wave Length = 660;; Iv(ucd) If@10mA Min.= *40;; Iv(ucd) If@10mA Typ.= *77
CompanySun LED Corporation
DatasheetDownload XYG1SMR18D datasheet
  

 

Features, Applications

UL RATING : 94V-0. HOUSING MATERIAL: TYPE 66 NYLON. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted.

A=25C) C) Reverse voltage Forward current Forward current (peak) 1/10Duty cycle 0.1ms pulse width Power dissipation Operating temperature Storage temperature Lead solder temperature [2mm below package base] VR IF iFS ~ +85 Tstg 260C For 5 Seconds Al As

T A=25C) Forward voltage (typ.) (I F=20mA) Forward voltage (max.) (I F=20mA) Reverse current (VR=5V) Wavelength at peak emission (I F=20mA) Wavelength at Dominate emission (I F=20mA) Spectral Line half-width (I F=20mA) Capacitance (VF=0V, f=1MHz)



 

Some Part number from the same manufacture Sun LED Corporation
XYG1SUG18D Material (Color) = GaP(Green);; Lens = Green Diffused;; Peak Wave Length = 565;; Iv(ucd) If@10mA Min.= 2;; Iv(ucd) If@10mA Typ.= 4.5
XYG1SUR18D Material (Color) = GaAsP/GaP(Red);; Lens = Red Diffused;; Peak Wave Length = 627;; Iv(ucd) If@10mA Min.= 3;; Iv(ucd) If@10mA Typ.= 4.5
XYG1SUY18D Material (Color) = GaAsP/GaP(Yellow);; Lens = Yellow Diffused;; Peak Wave Length = 590;; Iv(ucd) If@10mA Min.= 1;; Iv(ucd) If@10mA Typ.= 3.5
XYH1LMR32D Material (Color) = GaAlAs(Red);; Lens = Red Diffused;; Peak Wave Length = 660;; Iv(ucd) If@10mA Min.= *100;; Iv(ucd) If@10mA Typ.= *299
XYH1LUG32D Material (Color) = GaP(Green);; Lens = Green Diffused;; Peak Wave Length = 565;; Iv(ucd) If@10mA Min.= 8;; Iv(ucd) If@10mA Typ.= 19
XYH1LUR32D Material (Color) = GaAsP/GaP(Red);; Lens = Red Diffused;; Peak Wave Length = 627;; Iv(ucd) If@10mA Min.= 8;; Iv(ucd) If@10mA Typ.= 19
XYH1LUY32D Material (Color) = GaAsP/GaP(Yellow);; Lens = Yellow Diffused;; Peak Wave Length = 590;; Iv(ucd) If@10mA Min.= 5;; Iv(ucd) If@10mA Typ.= 14
XYL2LMR61D Material (Color) = GaAlAs(Red);; Lens = Red Diffused;; Peak Wave Length = 660;; Iv(ucd) If@10mA Min.= *70;; Iv(ucd) If@10mA Typ.= *198
XYL2LUG61D Material (Color) = GaP(Green);; Lens = Green Diffused;; Peak Wave Length = 565;; Iv(ucd) If@10mA Min.= 5;; Iv(ucd) If@10mA Typ.= 8
XYL2LUR61D Material (Color) = GaAsP/GaP(Red);; Lens = Red Diffused;; Peak Wave Length = 627;; Iv(ucd) If@10mA Min.= 8;; Iv(ucd) If@10mA Typ.= 13
XYL2LUY61D Material (Color) = GaAsP/GaP(Yellow);; Lens = Yellow Diffused;; Peak Wave Length = 590;; Iv(ucd) If@10mA Min.= 1.8;; Iv(ucd) If@10mA Typ.= 4.5
XYMD101WE12V Material (Color) = InGaAlP(Red);; Lens = Water Clear;; Peak Wave Length = 640;; Iv(ucd) If@10mA Min.= *800;; Iv(ucd) If@10mA Typ.= *1790
XYMD101WE28V
XYMD101WE6V
XYMD102WE12V
XYMD102WE28V
XYMD102WE6V
XYMY101W12V Material (Color) = InGaAlP(Yellow);; Lens = Water Clear;; Peak Wave Length = 590;; Iv(ucd) If@10mA Min.= *550;; Iv(ucd) If@10mA Typ.= *1190
XYMY101W28V
XYMY101W6V
XYMY102W12V
Same catergory

A6118 : . Consisting of eight npn Darlington output stages and the associated common-emitter input stages, these drivers are designed to interface between low-level digital logic and vacuum fluorescent displays. Both devices are capable of driving the digits and/or segments of these displays and are designed to permit all outputs to be activated simultaneously.

L1009 : Precision Half Spherical Lamps. Line No. Part No. L1010 L1040 Volts Amps Lumens Color Temp. Degrees Kelvin Life Hours Vacuum Or Gas V G Krypton Halogen V Halogen Filament Type C-2R C-6 Filament Dimensions Lgth. x Dia. Base Type Brass Drawing Line No. 8 9 Part No. L8010 L8015 Volts 5.0 6.0 Amps 0.770 1.600 Lumens 26 75 Color Temp. Degrees Kelvin 2,420 2,900 Life Hours 10,000 150 Vacuum.

MTPS6067W : Point Source Led. Red Point Source LED Emitting Window Diameter 150 m Small Temp. Coefficient of PO High Reliability Characteristic Forward Current Pulsed Forward Current Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Junction Temperature Soldering Temperature Symbol IF IFP VR PD Topr Tstg Tj Tsol Max. Test Condition Unit S, T=10mS for 5 sec.

TSOP1838ON1 : Photo Modules For PCM Remote Control Systems. The TSOP18.ON1 series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the reliable function even in disturbed ambient and the protection.

VI-321 : Number of Digits = 3 ;; Digit Height = 8.89 ;; Duty = Static ;; View Area = 25.4 X 12.7.

W1384AD/GD : Material: Gap , Wavelength: 568nm. The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. COMPATIBLE. VIEWING ANGLE. RELIABILITY - LIFE MEASURED IN YEARS. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. s are subject to change without.

W7113MBCK : Material: Gan , Wavelength: 466nm. !LOW POWER CONSUMPTION. !POPULAR T-1 DIAMETER PACKAGE. !GENERAL PURPOSE LEADS. !RELIABLE AND RUGGED. ! LONG The Blue source color devices are made with GaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery.

XSMR22D : Material (Color) = GaAlAs(Red);; Lens = Red Diffused;; Peak Wave Length = 660;; Iv(ucd) If@10mA Min.= *100;; Iv(ucd) If@10mA Typ.= *395.

SG320240L : S FOR LCD MODULE SG320240L. 3375 Scott Blvd. Suite 222 Santa Clara CA 95054 Tel: 408-988-1101 Fax: 408-988-7626 Email: micro@microelect.com Http://www.microelect.com Number of Dots Duty Cycle Power Supply Backlight Options Recommended Controller MECHANICAL PARAMETERS Module Size x14.1T mm Viewing Area Size 78.4H mm Active Area Size 74.37H mm Dot Size 0.28 mm Dot Pitch 0.31 mm Supply.

551-0307-010F : LED , Round with Domed Top, 3mm 2.1V 10mA Yellow Through Hole, Right Angle; LED CBI 3MM HI EFF YELLOW .200. s: Color: Yellow ; Mounting Type: Through Hole, Right Angle ; Configuration: Single ; Voltage Rating: 2.1V ; Current: 10mA ; Lens Style/Size: Round with Domed Top, 3mm ; Packaging: Bulk ; Lens Type: Diffused, Tinted ; Lead Free Status: Lead Free.

598-8680-207F : LEDs -; LED INGAN GRN/BLU WTR CLR 1210. s: Color: Blue, Green ; Lens Style/Size: Rectangle with Flat Top, 2.7mm x 2mm ; Millicandela Rating: 60mcd Blue, 260mcd Green ; Voltage - Forward (Vf) Typ: 3.2V Blue, 3.2V Green ; Wavelength - Dominant: 470nm, 525nm ; Wavelength - Peak: - ; Current - Test: 20mA ; Viewing Angle: 140 ; Lens Type: Clear ; Luminous.

586-2201-202F : LEDs - Lamp Replacements Red *; LED WEDGE BASED T3 1/4 RED. s: Color: Red ; Wavelength: 615nm ; Size / Dimension: T - 3 1/4 ; Millicandela Rating: 820mcd ; Configuration: Single ; Voltage - Forward (Vf) Typ: * ; Applications: Incandescent Replacements, Indicator Lights ; Can Replace Lamps: 159, 259, 444, 555, 124, 158, 161, 168, 193, 194, 658, 184,.

OP290B : Infrared Emitters 4.0V; DIODE IR PLASTIC GAAIAS T-1 3/4. s: Voltage - Forward (Vf) Typ: 4.0V ; Current - DC Forward (If): 150mA ; Wavelength: 890nm ; Viewing Angle: 50 ; Radiant Intensity (Ie) Min @ If: - ; Mounting Type: Through Hole ; Package / Case: T 1 3/4 ; Orientation: Top View ; Packaging: Bulk ; Lead Free Status: Lead Free ; RoHS Status: RoHS.

180580-0001 : LED Lighting Mounting Accessories NICHIA L SERIES LED ARRAY HOLDER (WTC). s: Manufacturer: Molex ; Type: LED Array Holders ; For Use With: Nichia COB-L110 Arrays ; Series: 180580 ; Height: 4.1 mm ; Length: 40.1 mm ; Mounting Style: Screw ; Width: 31 mm.

 
0-C     D-L     M-R     S-Z