|
|
Part: 6N136
Category:
Optoelectronics
-> Optocouplers
Description: ti 6N136, 8 Pin 1-Channel Optocoupler
Company: Texas Instruments, Inc.
Datasheet: Download 6N136 datasheet File size : 341 kB
Request For quote: Find where to buy 6N136
Datasheet text preview:
6N135, 6N136, HCPL4502 OPTOCOUPLERS/OPTOISOLATORS
SOES022A JULY 1986 REVISED APRIL 1998
D D D D D D D
Compatible with TTL Inputs High-Speed Switching . . . 1 Mbit/s Typ Bandwidth . . . 2 MHz Typ High Common-Mode Transient Immunity . . . 1000 V/µs Typ High-Voltage Electrical Insulation . . . 3000 Vdc Min Open-Collector Output UL Recognized . . . File Number 65085
6N135, 6N136, OR HCPL4502 PACKAGE (TOP VIEW)
NC ANODE CATHODE NC
1 2 3 4
8 7 6 5
V CC BASE/OPEN OUTPUT GND
Terminal 7 is BASE on the 6N135 and 6N136 and OPEN on the HCPL4502 NC No internal connection
description
These high-speed optocouplers are designed for use in analog or digital interface applications that require high-voltage isolation between the input and output. Applications include line receivers that require high common-mode transient immunity, and analog or logic circuits that require input-to-output electrical isolation. The 6N135, 6N136, and HCPL4502 optocouplers each consists of a light-emitting diode and an integrated photon detector composed of a photodiode and an open-collector output transistor. Separate connections are provided for the photodiode bias and the transistor-collector output. This feature, which reduces the transistor base-to-collector capacitance, results in speeds up to one hundred times that of a conventional phototransistor optocoupler. The 6N135 is designed for TTL/CMOS, TTL/LSTTL, and wide-band analog applications. The 6N136 and HCPL4502 are designed for high-speed TTL/TTL applications. The HCPL4502 has no base connection.
schematic
ANODE 2 8 VCC BASE: 6N135, 6N136 OPEN: HCPL4502 OUTPUT GND
7 6 CATHODE 3 5
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Copyright © 1998, Texas Instruments Incorporated
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
1
6N135, 6N136, HCPL4502 OPTOCOUPLERS/OPTOISOLATORS
SOES022A JULY 1986 REVISED APRIL 1998
absolute maximum ratings at 25°C free-air temperature (unless otherwise noted)
Supply and output voltage range, VCC and VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 15 V Reverse input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 V Emitter-base reverse voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 V Peak input forward current (pulse duration = 1 ms, 50% duty cycle, see Note 1) . . . . . . . . . . . . . . . . . . 50 mA Peak transient input forward current (pulse duration 1 µs, 300 Hz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 A Average forward input current(see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA Peak output current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 mA Average output current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 mA Base current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 mA Input power dissipation at (or below) 70°C free-air temperature (see Note 3) . . . . . . . . . . . . . . . . . . . . . 45 mW Output power dissipation at (or below) 70°C free-air temperature (see Note 4) . . . . . . . . . . . . . . . . . . 100 mW Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55°C to 125°C Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55°C to 100°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. JEDEC registered data for 6N135 and 6N136 NOTES: 1. Derate linearly above 70°C free-air temperature at the rate of 1.67 mA/°C. 2. Derate linearly above 70°C free-air temperature at the rate of 0.83 mA/°C. 3. Derate linearly above 70°C free-air temperature at the rate of 1.50 mW/°C. 4. Derate linearly above 70°C free-air temperature at the rate of 3.33 mW/°C.
2
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
6N135, 6N136, HCPL4502 OPTOCOUPLERS/OPTOISOLATORS
SOES022A JULY 1986 REVISED APRIL 1998
electrical characteristics over operating free-air temperature range of 0°C to 70°C (unless otherwise noted)
PARAMETER VF VF VBR VOL Input forward voltage Temperature coefficient of forward voltage Input breakdown voltage Low-level output voltage output voltage TEST CONDITIONS CONDITIONS IF = 16 mA, IF = 16 mA IR = 10 µA, VCC = 4.5 V, IF = 16 mA, 16 mA IB = 0 IF = 0, IB = 0 0, TA = 25°C VCC = 15 V, IF = 0, VCC = 15 V, IF = 0, TA = 25°C VCC = 15 V, IF = 0, VCC = 15 V, IF = 16 mA, VO = 5 V, VCC = 4.5 V, IF = 16 mA, TA = 25°C, VCC = 4.5 V, IF = 16 mA, See Note 5 VIO = 500 V, See Note 6 VIO = 3000 V, TA = 25°C, See Note 6 VF = 0, f = 1 MHz, TA = 25°C IOL = 1.1 mA IOL = 2.4 mA VCC = VO = 5.5 V VCC = VO = 15 V VO = 15 V, IB = 0 IO = 0, IB = 0, IO = 0, IB = 0 IO = 0, IB = 0 IO = 3 mA VO = 0.4 V, IB = 0, See Note 5 VO = 0.5 V, IB = 0, TA = 25°C, t = 5 s, RH = 45%, f = 1 MHz See Note 6 60 0.6 40 0.02 3 0.01 500 1 50 5 0.1 0.4 V 0.1 3 0.01 0.4 500 1 50 nA µA µA µA µA µA TA = 25°C 6N135 MIN TYP 1.6 1.8 5 MAX 1.7 6N136, HCPL4502 MIN TYP MAX 1.6 1.8 1.7 UNIT V mV/°C V
IOH IOH ICCH ICCH ICCL hFE
High-level output current output current
High-level output current Supply current, high-level output Supply current, high-level output Supply current, low-level output Transistor forward current transfer ratio
1
0.02
1
2 40 100 (6N136 only) 19% 24%
2
100
CTR
Current transfer ratio
7%
18%
CTR
Current transfer ratio
5% 1012
15% 1012 µA pF pF
rIO IIO Ci Cio
Input-output resistance Input-output insulation leakage current Input capacitance Input-output capacitance
1 60 0.6
1
All typical values are at TA = 25°C. JEDEC registered data for 6N135 and 6N136 NOTES: 5. Current transfer ratio is defined as the ratio of output collector current IO to the forward LED input current IF times 100%. 6. These parameters are measured with terminals 2 and 3 shorted together and terminals 5, 6, 7, and 8 shorted together.
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
3
6N135, 6N136, HCPL4502 OPTOCOUPLERS/OPTOISOLATORS
SOES022A JULY 1986 REVISED APRIL 1998
operating characteristics, VCC = 5 V, IF = 16 mA, TA = 25°C (unless otherwise noted)
PARAMETER BW Bandwidth ( 3 dB) TEST CONDITIONS CONDITIONS RL = 100 , See Note 7 6N135 MIN TYP 2 MAX 6N136, HCPL4502 MIN TYP 2 MAX UNIT MHz
NOTE 7: Bandwidth is the range of frequencies within which the ac output voltage is not more than 3 dB below the low-frequency value.
switching characteristics at VCC = 5 V, IF = 16 mA, TA = 25°C
PARAMETER TEST CONDITIONS CONDITIONS RL = 4.1 k, See Figure 1 RL = 1.9 k, See Figure 1 RL = 4.1 k, See Figure 1 RL = 1.9 k, See Figure 1 VCM = 10 V, RL = 4.1 k, See Figure 2 VCM = 10 V, RL = 1.9 k, See Figure 2 VCM = 10 V, See Notes 9 and 10, VCM = 10 V, See Notes 9 and 10, See Note 8, See Note 9, See Note 8, See Note 9, IF = 0, See Notes 8 and 10, IF = 0, See Notes 9 and 10, RL = 4.1 k, See Figure 2 RL = 1.9 k, See Figure 2 6N135 MIN TYP 1 MAX 1.5 µs 0.6 0.7 1.5 µs 0.6 0.8 0.8 6N136, HCPL4502 MIN TYP MAX UNIT
tPLH
Propagation delay time, low to high low-to-highlevel output
tPHL
Propagation delay time, high to low high-to-lowlevel output
dV
CM (H) dt
Common-mode input transient immunity, high-level output
1000 V/µs 1000
dV
CM (L) dt
Common-mode input transient immunity, low-level output
1000 V/µs 1000
JEDEC registered data for 6N135 and 6N136 NOTES: 8. The 4.1-k load represents one LSTTL unit load of 0.36 mA and a 6.1-k pullup resistor. 9. The 1.9-k load represents one TTL unit load of 1.6 mA and a 5.6-k pullup resistor. 10. Common-mode transient immunity, high-level output, is the maximum rate of rise of the common-mode input voltage that does not cause the output voltage to drop below 2 V. Common-mode input transient immunity, low-level output, is the maximum rate of fall of the common-mode input voltage that does not cause the output voltage to rise above 0.8 V.
4
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
6N135, 6N136, HCPL4502 OPTOCOUPLERS/OPTOISOLATORS
SOES022A JULY 1986 REVISED APRIL 1998
PARAMETER MEASUREMENT INFORMATION
Pulse Generator ZO = 50 tr = 5 ns Input Current Monitor 100 5V RL Output
Open
CL = 15 pF (see Note A) GND
TEST CIRCUIT
Input Current
IF 0V 5V
Output Voltage tPHL
1.5 V
1.5 V VOL tPLH
WAVEFORMS NOTE A: CL includes probe and stray capacitance.
Figure 1. Switching Test Circuit and Waveforms
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
5
Others parts begin by 6n
6N-1
|
|
|
