|Category||Logic => Schmitt Triggers => CMOS/BiCMOS->AC/ACT Family|
|Description||Dual 4-input Positive-nand Schmitt Trigger|
|Company||Texas Instruments, Inc.|
|Datasheet||Download 74AC11013 datasheet
Operation From Very Slow Edges Improved Line-Receiving Characteristics High Noise Immunity Flow-Through Architecture Optimizes PCB Layout Center-Pin VCC and GND Configurations Minimize High-Speed Switching Noise EPIC TM (Enhanced-Performance Implanted CMOS) 1-µm Process 500-mA Typical Latch-Up Immunity at 125°C Package Options Include Plastic Small-Outline Packages and Standard Plastic 300-mil DIPsdescription
Each circuit functions a 4-input NAND gate, but because of the Schmitt action, it has different input threshold levels for positive-going (VT+) and negative-going (VT) signals. The 74AC11013 is characterized for operation from to 85°C.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 772511443
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC. 7 V Input voltage range, VI (see Note V to VCC 0.5 V Output voltage range, VO (see Note V to VCC 0.5 V Input clamp current, IIK (VI VI > VCC). 20 mA Output clamp current, IOK (VO VO > VCC). 50 mA Continuous output current, IO (VO 0 to VCC). 50 mA Continuous current through VCC or GND pins. 100 mA Storage temperature range. to 150°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
MIN VCC VIH Supply voltage High-level input voltage VCC 3 V VCC 4.5 V VCC 5.5 V VCC 3 V VIL VI VO IOH Low-level input voltage Input voltage Output voltage High-level output current VCC 3 V VCC 4.5 V VCC 5.5 V VCC 3 V IOL /v TA Low-level output current Input transition rise or fall rate Operating free-air temperature VCC 4.5 V VCC 40 VCC 4.5 V VCC 5.5 V VCC ns/ °C mA NOM 5 MAX 5.5 UNIT V
|Some Part number from the same manufacture Texas Instruments, Inc.|
|74AC11013D ti 74AC11013, Dual 4-Input Positive-nand Gates With Schmitt-trigger|
|74AC11014 Hex Schmitt-trigger Inverter|
|74AC11014DW ti 74AC11014, Hex Inverters With Schmitt-trigger|
|74AC11020D ti 74AC11020, Dual 4-Input Positive-nand Gates|
|74AC11021 Dual 4-input Positive-and Gate|
|74AC11021D ti 74AC11021, Dual 4-Input Positive-and Gates|
|74AC11027 Triple 3-input Positive-nOR GATE|
|74AC11027D ti 74AC11027, Triple 3-Input Positive-nOR GATEs|
|74AC11030 8-input Positive-nand Gate|
|74AC11030D ti 74AC11030, 8-Input Positive-nand Gates|
|74AC11032 Quadruple 2-input Positive-OR GATE|
|74AC11032D ti 74AC11032, Quadruple 2-Input Positive-OR GATEs|
|74AC11032DB Quadruple 2-input Positive-OR GATE|
|74AC11032DBLE ti 74AC11032, Quadruple 2-Input Positive-OR GATEs|
|74AC11034 Hex Noninverter|
|74AC11034DW ti 74AC11034, Hex Noninverting Drivers|
|74AC11074 Dual D-type Positive Edge Triggered Flip-flop With Clear|
|74AC11074D ti 74AC11074, Dual Positive-edge-triggered D-type Flip-flops With Clear And Preset|
|74AC11074PW Dual Positive-edge-triggered D-type Flip-flop With Clear And Preset|
|74AC11074PWLE ti 74AC11074, Dual Positive-edge-triggered D-type Flip-flops With Clear And Preset|
CY5474FCT373T : 1-of-8 Decoder
SN74ABT245DW : Standard Transceivers ti SN74ABT245, Octal Bus Transceivers With 3-State Outputs
SN74ACT7813-40DL : Synchronous FIFOs ti SN74ACT7813, 64 X 18 Synchronous Fifo Memory
SN74HC04DT : ti SN74HC04, Hex Inverters
TPS62320DRCRG4 : 500-ma, 3-mhz Synchronous Step-down Converter IN CHIP Scale Packaging
SN74LVTZ244DBRE4 : Inverting Buffers and Drivers ti SN74LVTZ244, 3.3-V Abt Octal Buffers/drivers With 3-State Outputs
SN74LV125ATRGYR : Logic - Buffers, Drivers, Receivers, Transceiver Integrated Circuit (ics) Buffer/Line Driver, Non-Inverting Tape & Reel (TR) 16mA, 16mA 4.5 V ~ 5.5 V; IC BUS BUFF 3ST QUAD 14TSSOP Specifications: Logic Type: Buffer/Line Driver, Non-Inverting ; Package / Case: 14-TSSOP (0.173", 4.40mm Width) ; Packaging: Tape & Reel (TR) ; Mounting Type: Surface Mount ; Number of Bits per Element: 1 ; Number of Elements: 4 ; Operating Temperature: -40°C ~ 125°C ; Voltage - Supply: 4.5 V ~
74CB3Q3306ADCURG4 : Logic - Signal Switches, Multiplexers, Decoder Integrated Circuit (ics) Surface Mount Tape & Reel (TR) 15mA, 30mA Single Supply; IC FET BUS SWITCH DUAL US8 Specifications: Circuit: 1 x 1 1 ; Independent Circuits: 2 ; Mounting Type: Surface Mount ; Current - Output High, Low: 15mA, 30mA ; Package / Case: 8-VFSOP (0.091", 2.30mm Width) ; Packaging: Tape & Reel (TR) ; Type: FET Bus Switch ; Voltage Supply Source: Single Supply ; Operating Temperature:
100363 : Military/Aerospace->ECL. 100363 - Low Power Dual 8-Input Multiplexer, Package: Cerquad, Pin Nb=24.
5962-9317501MXA : Standard Transceivers. ti SN54ABT16245A, 16-Bit Bus Transceivers With 3-State Outputs.
74V2G07CTR : Dual Buffer (Open Drain). HIGH SPEED: tPD =3.7ns (TYP.) at VCC = 5V LOW POWER DISSIPATION: ICC at TA=25°C HIGH NOISE IMMUNITY: VNIH = V NIL = 28% VCC (MIN.) POWER DOWN PROTECTION ON INPUT OPERATING VOLTAGE RANGE: VCC(OPR) to 5.5V IMPROVED LATCH-UP IMMUNITY The is an advanced high-speed CMOS TRIPLE BUFFER (OPEN DRAIN) fabricated with sub-micron silicon gate and double-layer metal.
HD74LVCC3245A : HD74LVC series->HD74LVC series. Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips.
IDT74ALVCH16524 : Bus Oriented Circuits. 3.3v CMOS 18-bit Registered Bus Transceiver With 3-state Outputs And Bus-hold.
IN74ALS244ADW : Octal Buffer/line Driver, Ninv (3-State) 20. The IN74ALS244 is Octal Buffers and Line Drivers designed to be used as memory address drivers, clock drivers and busoriented transmitters/receivers which provide improved PC board density. Switching response specified into 500/50 pF Switching s guaranteed over full temperature and VCC range Low level drive current: = 12 mA, 24 mA ORDERING INFORMATION.
M95128-BN1T : 256/128 Kbit Serial Spi Bus EePROM With High Speed Clock. 256/128 Kbit Serial SPI Bus EEPROM With High Speed Clock SPI Bus Compatible Serial Interface Supports Positive Clock SPI Modes 5 MHz Clock Rate (maximum) Single Supply Voltage: to 5.5V for to 3.6V for to 5.5V for to 3.6V for M95xxx-R Status Register Hardware and Software Protection of the Status Register BYTE and PAGE WRITE (up to 64 Bytes) Self-Timed.
SN54HC164FK : 8-bit Parallel-out Serial Shift Registers. AND-Gated (Enable / Disable) Serial Inputs Fully Buffered Clock and Serial Inputs Direct Clear Package Options Include Plastic Small-Outline (D) and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs These 8-bit shift registers feature AND-gated serial inputs and an asynchronous clear (CLR) input.
SN65LVDS2DBV : High-speed Differential Line Receiver. 400 Mbps Operates From to 3.6-V Supply Available in the SOT-23 Package Differential Input Voltage Threshold Less Than 100 mV Propagation Delay Times, 2.5 ns Typical Power Dissipation at 200 MHz Is Typically 60 mW Bus-Pin ESD Protection Exceeds 15 kV Open-Circuit Fail Safe Output is High Impedance With VCC 1.5 V The is a single low-voltage differential.
SN74198N : ti SN74198, Bidirectional Shift Registers.
SN7422 : Bipolar->TTL Family. Dual 4-input Positive-nand Gates With Open Collector Outputs.
SN74ABT16640DGGR : Standard Transceivers. ti SN74ABT16640, 16-Bit Bus Transceivers With 3-State Outputs.
SN74AS151D : Multiplexers. ti SN74AS151, 1-of-8 Data Selectors/multiplexers. to 1-Line Multiplexers Can Perform as: Boolean Function Generators Parallel-to-Serial Converters Data Source Selectors Input Clamping Diodes Simplify System Design Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs These data selectors/multiplexers provide full.
SN74S257D : Multiplexers. ti SN74S257, Quadruple 2-Line to 1-Line Data Selectors/multiplexers With 3-State Outputs.
TC74HCT245AFW : TC74HCT Series. Function = Octal Bus Transceiver (3-state) ;; Pins = 20.
TC74LCX245 : Bus Oriented Circuits. Low Voltage Octal Bus Transceiver.
A1280A-1CQG172B : FPGA, 1232 CLBS, 8000 GATES, 60 MHz, CQFP172. s: System Gates: 8000 ; Logic Cells / Logic Blocks: 1232 ; Package Type: Other, CERAMIC, CQFP-172 ; Logic Family: CMOS ; Pins: 172 ; Internal Frequency: 60 MHz ; Operating Temperature: -55 to 125 C (-67 to 257 F) ; Propagation Delay: 4.3 ns ; Supply Voltage: 5V.
SY100EL57LZGTR : 100EL SERIES, 4 LINE TO 1 LINE MULTIPLEXER, COMPLEMENTARY OUTPUT, PDSO16. s: Output Characteristics: Complementary Output ; Package Type: SOIC, 0.150 INCH, LEAD FREE, SOIC-16 ; Logic Family: ECL ; Number of Pins: 16 ; Inputs: 4 ; Propagation Delay: 0.5600 ns ; Operating Temperature: -40 to 85 C (-40 to 185 F).
74AHCU04PWDH : AHC SERIES, HEX 1-INPUT INVERT GATE, PDSO14. s: Gate Type: NOT ; Supply Voltage: 5V ; Logic Family: CMOS ; Inputs: 1 ; Propagation Delay: 13.5 ns ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Pin Count: 14 ; IC Package Type: TSSOP, Other, 4.40 MM, PLASTIC, SOT-402-1, TSSOP-14.