|Category||Logic => Gates => CMOS/BiCMOS->AC/ACT Family|
|Description||Dual 4-input Positive-and Gate|
|Company||Texas Instruments, Inc.|
|Datasheet||Download 74AC11021 datasheet
Flow-Through Architecture Optimizes PCB Layout Center-Pin VCC and GND Configurations Minimize High-Speed Switching Noise EPIC TM (Enhanced-Performance Implanted CMOS) 1-µm Process 500-mA Typical Latch-Up Immunity at 125°C Package Options Include Plastic Small-Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 300-mil DIPsdescription
These devices contain two independent 4-input AND gates. They perform the Boolean functions or in positive logic. The 54AC11021 is characterized for operation over the full military temperature range to 125°C. The 74AC11021 is characterized for operation from to 85°C.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the D, J, and N packages.absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC. 7 V Input voltage range, VI (see Note V to VCC 0.5 V Output voltage range, VO (see Note V to VCC 0.5 V Input clamp current, IIK (VI VI > VCC). 20 mA Output clamp current, IOK (VO VO > VCC). 50 mA Continuous output current, IO (VO 0 to VCC). 50 mA Continuous current through VCC or GND. 100 mA Storage temperature range. to 150°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
54AC11021 MIN VCC VIH Supply voltage High-level input voltage VCC 3 V VCC 4.5 V VCC 5.5 V VCC 3 V VIL VI VO IOH Low-level input voltage Input voltage Output voltage High-level output current VCC 3 V VCC 4.5 V VCC 5.5 V VCC 3 V IOL /v TA Low-level output current Input transition rise or fall rate Operating free-air temperature VCC 4.5 V VCC 55 VCC 4.5 V VCC 5.5 V VCC NOM 5 MAX 5.5 74AC11021 MIN VCC ns/ °C mA NOM 5 MAX 5.5 UNIT V
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
VI = VCC or GND 5V 3.5 Not more than one output should be tested at a time, and the duration of the test should not exceed 10 ms.
|Some Part number from the same manufacture Texas Instruments, Inc.|
|74AC11021D ti 74AC11021, Dual 4-Input Positive-and Gates|
|74AC11027 Triple 3-input Positive-nOR GATE|
|74AC11027D ti 74AC11027, Triple 3-Input Positive-nOR GATEs|
|74AC11030 8-input Positive-nand Gate|
|74AC11030D ti 74AC11030, 8-Input Positive-nand Gates|
|74AC11032 Quadruple 2-input Positive-OR GATE|
|74AC11032D ti 74AC11032, Quadruple 2-Input Positive-OR GATEs|
|74AC11032DB Quadruple 2-input Positive-OR GATE|
|74AC11032DBLE ti 74AC11032, Quadruple 2-Input Positive-OR GATEs|
|74AC11034 Hex Noninverter|
|74AC11034DW ti 74AC11034, Hex Noninverting Drivers|
|74AC11074 Dual D-type Positive Edge Triggered Flip-flop With Clear|
|74AC11074D ti 74AC11074, Dual Positive-edge-triggered D-type Flip-flops With Clear And Preset|
|74AC11074PW Dual Positive-edge-triggered D-type Flip-flop With Clear And Preset|
|74AC11074PWLE ti 74AC11074, Dual Positive-edge-triggered D-type Flip-flops With Clear And Preset|
|74AC11086 Quad 2-input Exclusive OR GATE|
|74AC11086D ti 74AC11086, Quadruple 2-Input Exclusive-OR GATEs|
|74AC11109 Dual J-k Positive-edge-triggered Flip-flop With Clear And Preset|
|74AC11109D ti 74AC11109, Dual J-k Positive-edge-triggered Flip-flops With Clear And Preset|
|74AC11112 Dual J-k Negative-edge-triggered Flip-flop With Clear And Preset|
|74AC11112D ti 74AC11112, Dual J-k Negative-edge-triggered Flip-flops With Clear And Preset|
OPA1632DGNR : Fully Differential I/o Audio Amplifier
SN74LV574ADGVR : D-Type (3-State) Flip-Flops ti SN74LV574A, Octal Edge-triggered D-type Flip-flops With 3-State Outputs
UC3852N : Power Factor Correction IC's ti UC3852, High Power-factor Preregulator
ADS7822PCG4 : Data Acquisition - Analog To Digital Converter (adc) Integrated Circuit (ics) 1 Pseudo-Differential, Unipolar Tube Single Supply; IC ADC 12BIT SER 200K 8DIP Specifications: Number of Bits: 12 ; Package / Case: 8-DIP (0.300", 7.62mm) ; Data Interface: Serial ; Packaging: Tube ; Sampling Rate (Per Second): 200k ; Operating Temperature: -40°C ~ 85°C ; Voltage Supply Source: Single Supply ; Number of Inputs and Type: 1 Pseudo-Differential, Unipolar ; Number
TPS2320IDRG4 : Pmic - Hot Swap Integrated Circuit (ics) Hot-Swap Controller Tape & Reel (TR) - 3 V ~ 13 V, 3 V ~ 5.5 V; IC DUAL HOTSWAP PWR CONT 16-SOIC Specifications: Applications: General Purpose ; Type: Hot-Swap Controller ; Package / Case: 16-SOIC (0.154", 3.90mm Width) ; Packaging: Tape & Reel (TR) ; Current Limit: - ; Internal Switch(s): No ; Operating Temperature: -40°C ~ 85°C ; Voltage - Supply: 3 V ~ 13 V, 3 V ~ 5.5 V ; Lead Free Statu
CC430F6135IRGCR : Rf Transceiver Rf/if And Rfid; IC MCU 16B 16K W/RF CORE 64VQFN Specifications: Frequency: 300MHz ~ 348MHz, 389MHz ~ 464MHz, 779MHz ~ 928MHz ; Data Rate - Maximum: 500kBaud ; Modulation or Protocol: FSK, GFSK, MSK, ASK, OOK ; Applications: General Purpose ; Power - Output: 10dBm ; Sensitivity: -117dBm ; Voltage - Supply: 1.8 V ~ 3.6 V ; Current - Receiving: 16mA
MSP430F5505IRGZT : Embedded - Microcontroller Integrated Circuit (ics) Internal Tape & Reel (TR) 1.8 V ~ 3.6 V; IC MCU 16BIT 16KB FLASH 48VQFN Specifications: Program Memory Size: 16KB (16K x 8) ; RAM Size: 6K x 8 ; Number of I /O: 31 ; Package / Case: 48-VFQFN Exposed Pad ; Speed: 25MHz ; Oscillator Type: Internal ; Packaging: Tape & Reel (TR) ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: RISC ; Data Converters: A/D
TM4C1237E6PZI : ARM Microcontrollers - MCU Tiva C Series MCU Specifications: Manufacturer: Texas Instruments ; Core: ARM Cortex M4 ; Data Bus Width: 32 bit ; Maximum Clock Frequency: 80 MHz ; Program Memory Size: 128 KB ; Data RAM Size: 32 KB ; On-Chip ADC: Yes ; Operating Supply Voltage: 3.3 V ; Maximum Operating Temperature: + 85 C ; Package / Case: LQFP-10
5962-9070301MEA : Multiplexers. ti CD54HCT158, High Speed CMOS Logic Quad 2-Input Multiplexers.
74FST1632861 : 20-Bit, Two Port Bus Switch With Resistor. Bus switches provide zero delay paths Low switch on-resistance: 28 TTL-compatible input and output levels ESD > 2000V per MIL-STD-883, Method > 200V using machine model = 0) Hot insertion capability Very low power dissipation Available in SSOP, TSSOP, and TVSOP packages The FST1632861 belongs to IDT's family of Bus switches. Bus switch devices.
CD4060B : CMOS/BiCMOS->4000 Family. CMOS 14-stage Ripple-carry Binary Counter/divider And Oscillator.
CD74AC373 : CMOS/BiCMOS->AC/ACT Family. Octal Transparent Latch, 3-state. Data sheet acquired from Harris Semiconductor SCHS289 This data sheet is applicable to the CD54/74AC373, CD54/74ACT373, and CD54ACT533. The CD74AC533 and CD74ACT533 were not acquired from Harris Semiconductor. .
CD74FCT245 : Bus Oriented Circuits. Bicmos Octal Bus Transceiver With 3-state Outputs.
CD74HC192 : Synchronous Counters-> CMOS/BiCMOS->HC/HCT Family. High Speed CMOS Logic Presettable Synchronous 4-bit Up/down Counters.
HCF4067 : HCF->CMOS 4000B Series. Analog Multiplexer/demultiplexer. LOW ON RESISTANCE : 125 (Typ.) OVER 15V p-p SIGNAL INPUT RANGE FOR VDD - VSS = 15V HIGH OFF RESISTANCE : CHANNEL LEAKAGE OF 10pA (Typ.) at VDD - VSS = 10V MATCHED SWITCH CHARACTERISTICS : RON = 5 (Typ.) FOR VDD - VSS =15V VERY LOW QUIESCENT POWER DISSIPATION UNDER A DIGITAL CONTROL INPUT AND SUPPLY CONDITIONS : 0.2µW (Typ.) at VDD - VSS = 10V BINARY.
HEF4557B : HEF4557B LSI; 1-to-64 Bit Variable Length Shift Register;; Package: SOT109-1 (SO16), SOT38-1 (DIP16).
IDT74FCT541 : CMOS/BiCMOS->FCT/FCT-T Family. Fast CMOS Octal Buffer/line Driver. IDT54/74FCT541 equivalent to FASTTM speed and drive IDT54/74FCT541A 25% faster than FAST to 55% faster than FAST IOL = 64mA (commercial) and 48mA (military) CMOS power levels (1mW typ. static) Product available in Radiation Tolerant and Radiation Enhanced versions Military product compliant to MIL-STD-883, Class B Meets or exceeds JEDEC Standard 18 s The IDT octal.
IDT74LVCH16240A : CMOS/BiCMOS->LVC/ALVC/VCX Family->Low Voltage. 3.3v CMOS 16-bit Buffer/driver With 3-state Outputs, 5v Tolerant I/o And Bus-hold.
KIC7S66FU : = Analog Switch ;; Package = Usv.
MC100EL12 : Bipolar->ECL 100 Family. Low Impedance Driver. The is a low impedance drive buffer. With two pairs of OR/NOR outputs the device is ideally suited for high drive applications such as memory addressing. The device is a function equivalent to the E112 device with higher performance capabilities. With propagation delays significantly faster than the E112, the EL12 is ideally suited for those applications.
MC10H160M : BBG Ecl Parity CHCK 12BT, Package: SOEIAJ-16, Pins=16. The a 12bit parity generatorchecker. The output goes high when an odd number of inputs are high providing the odd parity function. Unconnected inputs are pulled to a logic low allowing parity detection and generation for less than 12 bits. The is a functional pin duplication of the standard 10K family part with 100% improvement in propagation delay.
PI74FCT162Q374T : Bus Oriented Circuits. Low Noise, 16-Bit Register W/3-State Output. VCC 5V ±10% Balanced output drivers: ±12 mA Output impedance: 35 (typical) Typical VOLP (Output Ground Bounce) 0.5V at VCC = 25°C Bus Hold retains last active bus state during tri-state Hysteresis on all inputs Packages available: 48-pin 240 mil wide plastic TSSOP (A) 48-pin 300 mil wide plastic SSOP (V) 48-pin 150 mil wide plastic BQSOP (B) Device.
SN74176 : CMOS/BiCMOS->HC/HCT Family. 35-mhz Presettable Decade And Binary Counters/latches.
SN74ALS114A : Bipolar->ALS Family. Dual J-k Negative-edge-triggered Flip-flop With Preset, Common Clear, And Common Clock.
SN74LS693N : ti SN74LS693, Synchronous Binary Counters With Output Registers.
SN74S381DW : Arithmetic Logic Units/function Generators. PRODUCTION DATA information is current as of publication date. Products conform to s per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. .
TC4001BF(ELP) : 4000/14000/40000 SERIES, QUAD 2-INPUT NOR GATE, PDSO14. s: Gate Type: NOR ; Supply Voltage: 5V ; Logic Family: CMOS ; Inputs: 2 ; Propagation Delay: 200 ns ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Pin Count: 14 ; IC Package Type: SOIC, Other, 0.300 INCH, PLASTIC, SOIC-14.