Details, datasheet, quote on part number: 74AC11027DR
Part74AC11027DR
CategoryLogic => Gates => NOR Gates
Descriptionti 74AC11027, Triple 3-Input Positive-nOR GATEs
CompanyTexas Instruments, Inc.
DatasheetDownload 74AC11027DR datasheet
  

 

Features, Applications

Flow-Through Architecture Optimizes PCB Layout Center-Pin VCC and GND Configurations Minimize High-Speed Switching Noise EPIC TM (Enhanced-Performance Implanted CMOS) 1-m Process 500-mA Typical Latch-Up Immunity at 125C Package Options Include Plastic Small-Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 300-mil DIPs

description

These devices contain three independent 3-input NOR gates. They perform the Boolean functions or in positive logic. The 54AC11027 is characterized for operation over the full military temperature range to 125C. The 74AC11027 is characterized for operation from to 85C.

FUNCTION TABLE (each gate) INPUTS OUTPUT

This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the D, J, and N packages. EPIC is a trademark of Texas Instruments Incorporated.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage range, VCC. 7 V Input voltage range, VI (see Note V to VCC 0.5 V Output voltage range, VO (see Note V to VCC 0.5 V Input clamp current, IIK (VI VI > VCC). 20 mA Output clamp current, IOK (VO VO > VCC). 50 mA Continuous output current, IO (VO 0 to VCC). 50 mA Continuous current through VCC or GND. 100 mA Storage temperature range. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

54AC11027 MIN VCC VIH Supply voltage High-level input voltage VCC 3 V VCC 4.5 V VCC 5.5 V VCC 3 V VIL VI VO IOH Low-level input voltage Input voltage Output voltage High-level output current VCC 3 V VCC 4.5 V VCC 5.5 V VCC 3 V IOL /v TA Low-level output current Input transition rise or fall rate Operating free-air temperature VCC 4.5 V VCC 55 VCC 4.5 V VCC 5.5 V VCC NOM 5 MAX 5.5 74AC11027 MIN VCC ns/ C mA NOM 5 MAX 5.5 UNIT V

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)

VI = VCC or GND 5V 3.5 Not more than one output should be tested at a time, and the duration of the test should not exceed 10 ms.

switching characteristics over recommended operating free-air temperature range, VCC 0.3 V (unless otherwise noted) (see Figure 1)

PARAMETER tPLH tPHL FROM (INPUT) Any TO (OUTPUT) = 25C MIN TYP MAX 54AC11027 MIN 1.5 MAX 12.9 74AC11027 MIN 1.5 MAX 10.9 12 UNIT ns

switching characteristics over recommended operating free-air temperature range, VCC 0.5 V (unless otherwise noted) (see Figure 1)

PARAMETER tPLH tPHL FROM (INPUT) Any TO (OUTPUT) = 25C MIN TYP MAX 54AC11027 MIN 1.5 MAX 8.9 74AC11027 MIN 1.5 MAX 7.7 8.1 UNIT ns

PARAMETER Cpd Power dissipation capacitance per gate TEST CONDITIONS = 50 pF, f = MHz TYP 24 UNIT pF


 

Related products with the same datasheet
74AC11027N
Some Part number from the same manufacture Texas Instruments, Inc.
74AC11027N ti 74AC11027, Triple 3-Input Positive-nOR GATEs
74AC11030 8-input Positive-nand Gate
74AC11030D ti 74AC11030, 8-Input Positive-nand Gates
74AC11032 Quadruple 2-input Positive-OR GATE
74AC11032D ti 74AC11032, Quadruple 2-Input Positive-OR GATEs
74AC11032DB Quadruple 2-input Positive-OR GATE
74AC11032DBLE ti 74AC11032, Quadruple 2-Input Positive-OR GATEs
74AC11034 Hex Noninverter
74AC11034DW ti 74AC11034, Hex Noninverting Drivers
74AC11074 Dual D-type Positive Edge Triggered Flip-flop With Clear
74AC11074D ti 74AC11074, Dual Positive-edge-triggered D-type Flip-flops With Clear And Preset
74AC11074PW Dual Positive-edge-triggered D-type Flip-flop With Clear And Preset
74AC11074PWLE ti 74AC11074, Dual Positive-edge-triggered D-type Flip-flops With Clear And Preset
74AC11086 Quad 2-input Exclusive OR GATE
74AC11086D ti 74AC11086, Quadruple 2-Input Exclusive-OR GATEs
74AC11109 Dual J-k Positive-edge-triggered Flip-flop With Clear And Preset
74AC11109D ti 74AC11109, Dual J-k Positive-edge-triggered Flip-flops With Clear And Preset
74AC11112 Dual J-k Negative-edge-triggered Flip-flop With Clear And Preset
74AC11112D ti 74AC11112, Dual J-k Negative-edge-triggered Flip-flops With Clear And Preset
74AC11132 Quadruple 2-input Positive-nand Schmitt-trigger
74AC11132D ti 74AC11132, Quadruple 2-Input Positive-nand Gates With Schmitt-triggers

5962-9680501Q2A : ti SN54AHC04, Hex Inverters

CD4049UBF : Inverting Buffers and Drivers ti CD4049UB, CMOS Hex Inverting Buffer/converter

PCI1250APEF : CardBus Controllers ti PCI1250A, Dual Socket Cardbus Controller

UCC2580N-4 : Soft Switching ti UCC2580-4, Single Ended Active Clamp/reset PWM

TMP320C2812ZHHS : Floating-point Digital Signal Processors

CD4063BME4 : Logic - Comparator Integrated Circuit (ics) Magnitude Comparator Tube 0.8A 3 V ~ 18 V; IC COMPARATOR MAGNITUDE 16SOIC Specifications: Type: Magnitude Comparator ; Number of Bits: 4 ; Voltage - Supply: 3 V ~ 18 V ; Current - Supply: 0.8A ; Delay Time - Propagation: 175ns ; Package / Case: 16-SOIC (0.154", 3.90mm Width) ; Packaging: Tube ; Operating Temperature: -55C ~ 125C ; Lead Free Status: Lead Free ; RoHS Sta

MAX3232IDRG4 : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Transceiver Tape & Reel (TR) 3 V ~ 5.5 V; IC DRVR/RCVR MULTCH RS232 16SOIC Specifications: Number of Drivers/Receivers: 2/2 ; Type: Transceiver ; Voltage - Supply: 3 V ~ 5.5 V ; Package / Case: 16-SOIC (0.154", 3.90mm Width) ; Packaging: Tape & Reel (TR) ; Protocol: RS232 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

MSP430F149IRTDT : Ultra-Low Power Microcontrollers ti MSP430F149, 16-Bit Ultra-low-power Microcontroller, 60 KB Flash, 2KB RAM, 12 Bit ADC, 2 Usarts, HW Multiplier

RI-I16-112A : Rfid Transponders, Tag Rf/if And Rfid; RFID TRANSP CIRC IN-LAY 13.56MHZ Specifications: RF Type: Read / Write ; Package / Case: 24.2mm Dia ; Frequency: 13.56MHz ; Features: ISO15693, ISO18000-3, 2kbits ; Packaging: Cut Tape (CT)

 
0-C     D-L     M-R     S-Z