Details, datasheet, quote on part number: 74AC11139PWR
Part74AC11139PWR
CategoryLogic => Decoders/Demultiplexers => Decoders
TitleDecoders
Descriptionti 74AC11139, Dual 2-Line to 4-Line Decoders/demultiplexers
CompanyTexas Instruments, Inc.
DatasheetDownload 74AC11139PWR datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Designed Specifically for High-Speed Memory Decoders and Data Transmission Systems Incorporates Two Enable Inputs to Simplify Cascading and/or Data Reception Center-Pin VCC and GND Configurations Minimize High-Speed Switching Noise EPIC TM (Enhanced-Performance Implanted CMOS) 1-m Process 500-mA Typical Latch-Up Immunity at 125C Package Options Include Plastic Small-Outline (D) and Thin Shrink Small-Outline (PW) Packages, and Standard Plastic 300-mil DIPs (N)

description

The 74AC11139 circuit is designed to be used in high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, this decoder can be used to minimize the effects of system decoding. When employed with high-speed memories utilizing a fast enable circuit, the delay times of this decoder and the enable time of the memory are usually less than the typical access time of the memory. This means that the effective system delay introduced by the decoder is negligible. The 74AC11139 is composed of two individual to 4-line decoders in a single package. The active-low enable input can be used as a data line in demultiplexing applications. This decoder/demultiplexer features fully buffered inputs, each of which represents only one normalized load to its driving circuit. The 74AC11139 is characterized for operation from to 85C.

FUNCTION TABLE ENABLE INPUT SELECT INPUTS Y0 OUTPUTS Y2 Y3

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. EPIC is a trademark of Texas Instruments Incorporated.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

These symbols are in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage range, VCC. 7 V Input voltage range, VI (see Note V to VCC 0.5 V Output voltage range, VO (see Note V to VCC 0.5 V Input clamp current, IIK (VI VI > VCC). 20 mA Output clamp current, IOK (VO VO > VCC). 50 mA Continuous output current, IO (VO 0 to VCC). 50 mA Continuous current through VCC or GND. 200 mA Maximum power dissipation = 55C (in still air) (see Note 2): D package. W N package. W PW package. 0.5 W Storage temperature range, Tstg. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The maximum package power dissipation is calculated using a junction temperature of 150_C and a board trace length of 750 mils, except for the N package, which has a trace length of zero.

MIN VCC VIH Supply voltage High-level input voltage VCC 3 V VCC 4.5 V VCC 5.5 V VCC 3 V VIL VI VO IOH Low-level input voltage Input voltage Output voltage High-level output current VCC 3 V VCC 4.5 V VCC 5.5 V VCC 3 V IOL t/v TA Low-level output current Input transition rise or fall rate Operating free-air temperature VCC 4.5 V VCC 0 40 VCC 4.5 V VCC 5.5 V VCC ns/V C mA NOM 5 MAX 5.5 UNIT V


 

Related products with the same datasheet
74AC11139DR
74AC11139N
74AC11139PWLE
Some Part number from the same manufacture Texas Instruments, Inc.
74AC11151 1-of-8 Data Selector/multiplexer
74AC11151D ti 74AC11151, 1-Of-8 Data Selectors/multiplexers
74AC11153 Dual 1-of-4 Data Selector/multiplexer
74AC11153D ti 74AC11153, Dual 1-Of-4 Data Selectors/multiplexers
74AC11157 Quadruple 2-line to 1-line Data Selector/multiplexer
74AC11157DW ti 74AC11157, Quadruple 2-Line to 1-Line Data Selectors/multiplexers
74AC11158 Quadruple 2-line to 1-line Data Selector/multiplexer
74AC11158DW ti 74AC11158, Quadruple 2-Line to 1-Line Data Selectors/multiplexers
74AC11160 Synchronous 4-bit Decade Counter
74AC11160DWR ti 74AC11160, Synchronous 4-Bit Decade Counters
74AC11162 Synchronous 4-bit Decade Counter
74AC11174 Hex D-type Flip-flop With Clear
74AC11174DW ti 74AC11174, 6-Bit Positive-edge-triggered D-type Flip-flops With Clear
74AC11175 Quadruple D-type Flip-flop With Clear
74AC11175DW ti 74AC11175, Quadruple Positive-edge-triggered D-type Flip-flops With Clear
74AC11181DW ti 74AC11181, Arithmetic Logic Units/function Generators
74AC11191 Synchronous 4-bit Up/down Binary Counter
74AC11191DW ti 74AC11191, Synchronous 4-Bit Up/down Binary Counters
74AC11194 4-bit Bidirectional Universal Shift Register
74AC11194DW ti 74AC11194, 4-Bit Bidirectional Universal Shift Registers
74AC112

SN74LVCZ244ADGV : Octal Buffer/driver With 3-state Outputs

SN74LVTH240DW : Inverting Buffers and Drivers ti SN74LVTH240, 3.3-V Abt Octal Buffers/drivers With 3-State Outputs

TL064IN : ti TL064, Quad Low-power JFET-input General-purpose Operational Amplifier

TLC080AID : ti TLC080A, Single Wide Bandwidth High Output Drive Single Supply op Amp With Shutdown

SN74ABT651DBRE4 : 36-bit Universal BUS Transceivers WITH 3-state Outputs

7BT2L15A-361 : HIGH Capacity Environmentally Sealed

TLV0831IPE4 : Data Acquisition - Analog To Digital Converter (adc) Integrated Circuit (ics) 2 Single-Ended, Unipolar; 1 Differential, Unipolar Tube Single Supply; IC 8 BIT 49 KSPS ADC S/O 8-DIP Specifications: Number of Bits: 8 ; Package / Case: 8-DIP (0.300", 7.62mm) ; Data Interface: Serial ; Packaging: Tube ; Sampling Rate (Per Second): 49k ; Operating Temperature: -40C ~ 85C ; Voltage Supply Source: Single Supply ; Number of Inputs and Type: 2 Single-Ended, Unipolar; 1 Differential,

CD4512BPWRG4 : Logic - Signal Switches, Multiplexers, Decoder Integrated Circuit (ics) Surface Mount Tape & Reel (TR) 6.8mA, 6.8mA Dual Supply; IC 8CH DATA SELECTOR HV 16-TSSOP Specifications: Circuit: 1 x 8 1 ; Independent Circuits: 1 ; Mounting Type: Surface Mount ; Current - Output High, Low: 6.8mA, 6.8mA ; Package / Case: 16-TSSOP (0.173", 4.40mm Width) ; Packaging: Tape & Reel (TR) ; Type: Data Selector/Multiplexer ; Voltage Supply Source: Dual Supply ; Operating

SN74AS1032ADG4 : ti SN74AS1032A, Quadruple 2-Input Positive-or Buffers/drivers

TPS72733DSET : LDO Voltage Regulators 250mAUltraLo IQ FastTrans RespRF Texas Instruments TPS727xx Ultra-Low Iq Low-Dropout Linear Regulators are ultra-low quiescent current LDOs with excellent line and ultra-fast load transient performance and are designed for power-sensitive applications. The LDO output voltage level is preset by the use of innovative factory EEPRO

 
0-C     D-L     M-R     S-Z