Details, datasheet, quote on part number: 74AC11158DWR
Part74AC11158DWR
CategoryLogic => Encoders/Multiplexers => Multiplexers
TitleMultiplexers
Descriptionti 74AC11158, Quadruple 2-Line to 1-Line Data Selectors/multiplexers
CompanyTexas Instruments, Inc.
DatasheetDownload 74AC11158DWR datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Flow-Through Architecture Optimizes PCB Layout Center-Pin VCC and GND Pin Configurations Minimize High-Speed Switching Noise EPIC TM (Enhanced-Performance Implanted CMOS) 1-m Process 500-mA Typical Latch-Up Immunity at 125C Package Options Include Plastic Small-Outline Packages and Standard Plastic 300-mil DIPs

description

This data selector/multiplexer contains inverters and drivers to supply full data selection to the four output gates. A separate output-enable (OE) input is provided. A 4-bit word is selected from one of two sources and is routed to the four outputs. The 74AC11158 provides true data. The 74AC11158 is characterized for operation from to 85C.

This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage range, VCC. 7 V Input voltage range, VI (see Note V to VCC 0.5 V Output voltage range, VO (see Note V to VCC 0.5 V Input clamp current, IIK (VI VI > VCC). 20 mA Output clamp current, IOK (VO VO > VCC). 50 mA Continuous output current, IO (VO 0 to VCC). 50 mA Continuous current through VCC or GND. 100 mA Storage temperature range. to 150C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

MIN VCC VIH Supply voltage High-level input voltage VCC 3 V VCC 4.5 V VCC 5.5 V VCC 3 V VIL VI VO IOH Low-level input voltage Input voltage Output voltage High-level output current VCC 3 V VCC 4.5 V VCC 5.5 V VCC 3 V IOL Low-level output current VCC 4.5 V VCC 5.5 V A/B Except A/B VCC 4.5 V VCC 5.5 V VCC ns/ C mA NOM 5 MAX 5.5 UNIT V

TA Operating free-air temperature NOTE 2: Unused or floating inputs must be held high or low.

electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)

5V 4 Not more than one output should be tested at a time, and the duration of the test should not exceed 10 ms.

switching characteristics over recommended operating free-air temperature range, VCC 0.3 V (unless otherwise noted) (see Figure 1)

switching characteristics over recommended operating free-air temperature range, VCC 0.5 V (unless otherwise noted) (see Figure 1)


 

Related products with the same datasheet
74AC11158N
Some Part number from the same manufacture Texas Instruments, Inc.
74AC11158N ti 74AC11158, Quadruple 2-Line to 1-Line Data Selectors/multiplexers
74AC11160 Synchronous 4-bit Decade Counter
74AC11160DWR ti 74AC11160, Synchronous 4-Bit Decade Counters
74AC11162 Synchronous 4-bit Decade Counter
74AC11174 Hex D-type Flip-flop With Clear
74AC11174DW ti 74AC11174, 6-Bit Positive-edge-triggered D-type Flip-flops With Clear
74AC11175 Quadruple D-type Flip-flop With Clear
74AC11175DW ti 74AC11175, Quadruple Positive-edge-triggered D-type Flip-flops With Clear
74AC11181DW ti 74AC11181, Arithmetic Logic Units/function Generators
74AC11191 Synchronous 4-bit Up/down Binary Counter
74AC11191DW ti 74AC11191, Synchronous 4-Bit Up/down Binary Counters
74AC11194 4-bit Bidirectional Universal Shift Register
74AC11194DW ti 74AC11194, 4-Bit Bidirectional Universal Shift Registers
74AC112
74AC11204-7DW ti 74AC11204, Clock Drivers, Hex Inverters
74AC11204DW
74AC11204DWR
74AC11204N
74AC11208-7DW ti 74AC11208, Dual 1-to-4 Clock Drivers With 3-State Outputs
74AC11208DBLE
74AC11208DW

CY74FCT162240TTSSOP : 16-bit Buffers/line Drivers

LM317LCD : 3-Terminal, 100mA Adjustable Positive Voltage Regulator

SM320LC31PQM40EP : ep - Military Enhanced Plastic Digital Signal Processor

SN74ALVCH162601DGGR : Universal Bus Transceivers (UBTs) ti SN74ALVCH162601, 18-Bit Universal Bus Transceiver With 3-State Outputs

SN74LVC1G58DCKR : Single Gates ti SN74LVC1G58, Configurable Multiple-function Gate

TLC2201AID : ti TLC2201A, Advanced LinCMOS(TM) Low-noise Precision Operational Amplifier

TLE2027IDR : ti TLE2027, Low-noise Precision Operational Amplifier

TLE2074A :

SN74AHC244NE4 : HEX Inverters

LM239DRG4 : QUAD Differential Comparators

OPA2354AIDGKTG4 : 250MHz, Rail-to-rail I/O, CMOS Dual Operational Amplifier

 
0-C     D-L     M-R     S-Z