Details, datasheet, quote on part number: INA331
PartINA331
CategorySemiconductors => Amplifiers => Instrumentation Amplifiers
Part familyINA331 Low-Power, Single Supply, CMOS, Instrumentation Amplifier
DescriptionLow-Power, Single Supply, CMOS, Instrumentation Amplifier 8-VSSOP -55 to 125
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload INA331 datasheet
Cross ref.Similar parts: LTC6800HMS8, LTC6800HMS8#TR, LTC6800HMS8#TRPBF, INA155E/250, INA155E/2K5, INA155EA/250, INA155EA/2K5, INA156EA/250, INA156EA/2K5
Quote
Find where to buy
 
Specifications 
Approx. Price (US$)0.80 | 1ku
CMRR(Min)(dB)90
RatingCatalog
Input Bias Current (+/-)(Max)(nA)0.01
Vs(Max)(V)5.5
Input Offset (+/-)(Max)(uV)500
Noise at 0.1 Hz - 10 Hz(Typ)(uVpp)7
Vs(Min)(V)2.5
Gain Error (+/-)(Max)(%)0.1
Operating Temperature Range(C)-55 to 125
Iq(Typ)(mA)0.415
Gain(Min)(V/V)5
Bandwidth at Min Gain(Typ)(MHz)2
Number of Channels(#)1
Gain(Max)(V/V)1000
Input Offset Drift (+/-)(Max)(uV/C)5
Noise at 1kHz(Typ)(nV/rt(Hz))46
Package GroupVSSOP
Gain Non-Linearity (+/-)(Max)(%)0.1
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
8DGKVSSOPR-PDSO-G2500LARGE T&RC31 33.97.65
Application notes
• Linear operating region of two-op-amp instrumentation amplifiers with gain stage | Doc
Spice Model
INA331 PSpice Model (Rev. A) - ZIP (10/04/2011)
INA331 TINA-TI Spice Model (Rev. A) - ZIP (10/04/2011)

 

Features, Applications

FEATURES

DESIGNED FOR LOW COST HIGH GAIN ACCURACY: 0.02%, 2ppm/C GAIN SET WITH EXT. RESISTORS FOR > 5V/V LOW OFFSET VOLTAGE: 250V HIGH CMRR: 94dB DC, at 45kHz LOW BIAS CURRENT: 0.5pA BANDWIDTH, SLEW RATE: 2.0MHz, 5V/s RAIL-TO-RAIL OUTPUT SWING: (V+) 0.02V WIDE TEMPERATURE RANGE: to +125C LOW QUIESCENT CURRENT: 490A max/chan SHUT DOWN: 0.01A MSOP-8 SINGLE AND TSSOP-14 DUAL PACKAGES

APPLICATIONS

q INDUSTRIAL SENSOR AMPLIFIERS: Bridge, RTD, Thermocouple, Position q PHYSIOLOGICAL AMPLIFIERS: ECG, EEG, EMG q A/D CONVERTER SIGNAL CONDITIONING q DIFFERENTIAL LINE RECEIVERS WITH GAIN q FIELD UTILITY METERS q PCMCIA CARDS q AUDIO AMPLIFIERS q COMMUNICATION SYSTEMS q TEST EQUIPMENT q AUTOMOTIVE INSTRUMENTATION

The INA331 rejects line noise and its harmonics, because common-mode error remains low even at higher frequencies. High bandwidth and slew rate makes the INA331 ideal for directly driving sampling Analog-to-Digital (A/D) converters as well as general-purpose applications. With high precision, low cost, and small packages, the INA331 outperforms discrete designs. Additionally, because they are specified for wide temperature range to +125C and operating range to +150C, they can be used in demanding industrial and automotive environments.

DESCRIPTION

The INA331 and INA2331 are rail-to-rail output, low-power CMOS instrumentation amplifiers that offer wide range, singlesupply operation as well as bipolar-supply operation. The INA331 family provides low-cost, low-noise amplification of differential signals with a low quiescent current of 415A (dropping to 0.01A when shutdown). Returning to normal operation within microseconds, this INA can be used for battery or multi-channel applications. Configured internally in a gain of 5V/V, the INA331 offers flexibility in higher gains by choosing external resistors.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Supply Voltage, V+ to V.................................................................... 7.5V Signal Input Terminals, Voltage(2)..................... (V) 0.5V to (V+) Current(2)..................................................... 10mA Output Short-Circuit(3).............................................................. Continuous Operating Temperature.................................................. to +125C Storage Temperature...................................................... to +150C Junction Temperature...................................................................... 150C Lead Temperature (soldering, 10s)................................................. 300C NOTES: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. (2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5V beyond the supply rails should be current limited 10mA or less. (3) Short-circuit to ground, one amplifier per package.

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

PACKAGE DESIGNATOR(1) TEMPERATURE RANGE to +125C SPECIFIED PACKAGE MARKING ORDERING NUMBER TRANSPORT MEDIA, QUANTITY

Tape and Reel, 250 Tape and Reel, 2500 Tape and Reel, 250 Tape and Reel, 2500

NOTE: (1) For the most current specifications and package information, refer to our web site at www.ti.com.

Shutdown A VOUTA REFA V+ REFB VOUTB Shutdown B
Boldface limits apply over the specified temperature range, to 125C.

= 25, and VREF VS /2, unless otherwise noted. INA331IDGK PARAMETER INPUT Input Offset Voltage, RTI Over Temperature Coefficient vs Power Supply vs Temperature Long-Term Stability Input Impedance Input Common-Mode Range Common-Mode Rejection Over Temperature Crosstalk, Dual INPUT BIAS CURRENT Bias Current Offset Current NOISE, RTI Voltage Noise: to 10Hz Current Noise: 1kHz GAIN(1) Gain Equation, Externally Set Range of Gain Error vs Temperature Nonlinearity Over Temperature OUTPUT Output Voltage Swing from Rail(3) Over Temperature Capacitance Load Drive Short-Circuit Current FREQUENCY RESPONSE Bandwidth, 3dB Slew Rate Settling Time, 0.1% 0.01% Overload Recovery POWER SUPPLY Specified Voltage Range Operating Voltage Range Quiescent Current per Channel Over Temperature Shutdown Quiescent Current/Chan TEMPERATURE RANGE Specified Range Operating/Storage Range Thermal Resistance = 2V step 50% Input Overload +2.7 IQ ISD VSD > 2.5(3) VSD to MHz V/s A C C/W to (5R2/R1) V/V % ppm/C pF mA VCM /2 IB IOS 0 eN CONDITION = +5V VOS dVOS/dT PSRR MIN TYP 250 MAX MIN INA331AIDGK INA2331AIPW TYP MAX 1000 2.1 UNITS V mV V/C V/V V/month dB pA nV/Hz Vp-p fA/Hz

Specifications same as INA331IDGK NOTES: (1) Does not include errors from external gain setting resistors. (2) Output voltage swings are measured between the output and power-supply rails. Output swings to rail only G 10. Output does not swing to positive rail if gain is less than 10. (3) See typical characteristic "Percent Overshoot vs Load Capacitance." (4) See typical characteristic "Shutdown Voltage vs Supply Voltage."


 

Some Part number from the same manufacture Texas Instruments, Inc.
INA331AIDGKR ti INA331, Low-Power, Single Supply, CMOS, Instumentation Amplifier
INA332
INA332AIDGKR ti INA332, Low-Power, Single Supply, CMOS, Low Cost, Instumentation Amplifier
INA337 Wide-Temperature, Precision Instrumentation Amplifier
INA337AIDGKR ti INA337, Wide-Temperature, Precision Instrumentation Amplifier
INA337AIDGKT Wide-Temperature, Precision Instrumentation Amplifier
INA337AIDGKT ti INA337, Wide-Temperature, Precision Instrumentation Amplifier
INA338 Wide-Temperature, Precision Instrumentation Amplifier With Shutdown
INA338AIDGSR ti INA338, Wide-Temperature, Precision Instrumentation Amplifier With Shutdown
INA338AIDGST Wide-Temperature, Precision Instrumentation Amplifier With Shutdown
INA338AIDGST ti INA338, Wide-Temperature, Precision Instrumentation Amplifier With Shutdown
ISO100
ISO100AP ti ISO100, Optically Coupled ISOlation Amplifier
ISO102 ti ISO102, Low Cost, High Voltage, Wide Bandwidth Standard Hermetic Dip Signal ISOlation Buffer Amplifiers
ISO103 ti ISO103, Low-Cost, Internally Powered ISOlation Amplifier
ISO106 ti ISO106, Low Cost, High Voltage, Wide Bandwidth Standard Hermetic Dip Signal ISOlation Buffer Amplifiers
ISO107 ti ISO107, High-Voltage, Internally Powered ISOlation Amplifier
ISO113 ti ISO113, Low-Cost, High Voltage, Internally Powered Output ISOlation Amplifier
ISO120
ISO120BG ti ISO120, Precision Low Cost ISOlation Amplifier
ISO121

TLE2227C : Excalibur Low-noise Dual Bipolar op Amp

UA7808C :

TPS40211DRCR : 4.5-v TO 52-V Input Current MODE Boost Controller

TPA731DGNRG4 : 700-mw MONO Low-voltage Audio Power Amplifier WITH Differential Inputs

SN74AVC4T245RSVR : 8-bit Dual-supply BUS Transceiver WITH Configurable Voltage Translation AND 3-state Outputs

MSP430F5329IPNR : Embedded - Microcontroller Integrated Circuit (ics) Internal Tape & Reel (TR) 1.8 V ~ 3.6 V; IC MCU 16BIT 128KB FLASH 80LQFP Specifications: Program Memory Size: 128KB (128K x 8) ; RAM Size: 10K x 8 ; Number of I /O: 63 ; Package / Case: 80-LQFP ; Speed: 25MHz ; Oscillator Type: Internal ; Packaging: Tape & Reel (TR) ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: RISC ; Data Converters: A/D 16x12b ; C

LM324NE3 : IC OPAMP GP 1.2MHZ 14DIP Texas Instruments' LM324/324A devices consist of four independent high-gain-frequency-compensated operational amplifiers. These are designed specifically to operate from a single-supply or split-supply over a wide range of voltages. Operation from split supplies also is possible if the diffe

ADS8922BRGER : Analog to Digital Converters - ADC ADS8922B 16-Bit, 500-KSPS, SAR ADC with internal reference buffer, internal LDO & multiSPI interface 24-VQFN -40 to 125 Texas Instruments ADS892xB 16-Bit SAR Analog-to-Digital Converters (ADCs) are a family of pin-to-pin compatible, high-speed, high-precision successive approximation register (SAR) based ADCs. These each have an integrated reference buffer and integrated low-dropout regulator (LDO). These devices

Same catergory

CLC103 : Fast Setting, High Current Wideband (discontinued). Comlinear CLC103 Fast Settling, High Current Wideband Op Amp 80MHz full-power bandwidth 100) 200mA output current 0.4% settling 10ns 600V/s slew rate 4ns rise and fall times (20V) Coaxial line driving DAC current to voltage amplifier Flash to D Baseband and video communications Radar and IF processors Applications The CLC103 is constructed using thin.

KB2502 : Video Amp Merged Osd Processor. The is a very high frequency video amplifier & wide range OSD processor 1 chip system with I2C Bus control used in monitors. It contains 3 matched R/G/B video amplifiers with OSD processor and provides flexible interfacing to I2C Bus controlled adjustment systems. R/G/B video amplifier OSD processor I2C bus control Cut-off brightness control R/G/B sub contrast/cut-off.

LA7016 : VCR Electronic Switch. Wide input dynamic range. Low distortion. Good frequency characteristic. s Parameter Maximum supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max Pd max Topr Tstg Parameter Circuit current Total harmonic distortion Noise Crosstalk Pedestal Second harmonic Third harmonic Control, threshold voltage V3s Symbol.

LOG104AID : ti LOG104, Logarithmic Amplifier. q EASY-TO-USE COMPLETE CORE FUNCTION q HIGH ACCURACY: 0.01% FSO Over 5 Decades q WIDE INPUT DYNAMIC RANGE: 7.5 Decades, 3.5mA q LOW QUIESCENT CURRENT: 1mA q WIDE SUPPLY RANGE: to 18V The is a versatile integrated circuit that computes the logarithm or log ratio of an input current relative to a reference current. The LOG104 is tested over a wide dynamic.

LT1636 : LT1636, Over-the-top Micropower Rail-to-rail Input And Output op Amp. Rail-to-Rail Input and Output Micropower: 50A IQ, 44V Supply Tiny 0.8mm DFN Package Operating Temperature Range: to 125C Over-The-Top: Input Common Mode Range Extends 44V Above VEE, Independent of VCC Low Input Offset Voltage: 225V Max Specified 3V, 5V and 15V Supplies High Output Current: 18mA Output Shutdown Output Drives 10,000pF with Output.

LZ8520X : Irda-control Single-chip Host Controller ( HC ). IrDA-Control - A New IrDA Standard for Wireless Command & Control Devices GENERAL : The Sharp IrDA-Control Host Controller (HC) is a single-chip communication LSI with built-in USB protocol and IrDA-Control protocol (MAC Layer and HID LLC User Peripheral Engine Communication Application Layer) services. When combined uP (LZ8519X) Controller for USB with.

NJM2712 : Ultra High Speed Single Operational Amplifier. ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER s GENERAL The is an ultra high speed dual operational amplifier. It can swings 260V/s high slew rate and 1GHz gain band width product(10MHz typ. It is suitable for pickup circuit of CD-R/RW or DVDR/RW, wideband video system, high resolution scanner or FAX, high speed telecommunications, and any other high.

OPA177 : . q LOW OFFSET VOLTAGE: 25V max q LOW DRIFT: 0.3V/C q HIGH OPEN-LOOP GAIN: 130dB min q LOW QUIESCENT CURRENT: 1.5mA typ q REPLACES INDUSTRY-STANDARD OP AMPS: OP-177, AD707, ETC. APPLICATIONS q PRECISION INSTRUMENTATION q DATA ACQUISITION q TEST EQUIPMENT q BRIDGE AMPLIFIER q THERMOCOUPLE AMPLIFIER The OPA177 precision bipolar op amp feature very low offset.

OPA2342 : . Low-Cost, Low-Power, Rail-to-Rail OPERATIONAL AMPLIFIERS MicroAmplifier TM Series LOW QUIESCENT CURRENT: 150A typ RAIL-TO-RAIL INPUT RAIL-TO-RAIL OUTPUT (within 1mV) SINGLE SUPPLY CAPABILITY LOW COST MicroSIZE PACKAGE OPTIONS: MSOP-8 TSSOP-14 The OPA342 series rail-to-rail CMOS operational amplifiers are designed for low-cost, low-power, miniature.

OPA704NA/250 : ti OPA704, 12V, CMOS, Rail-to-rail I/O, Operational Amplifier. q RAIL-TO-RAIL INPUT AND OUTPUT q WIDE SUPPLY RANGE: Single Supply: to 12V Dual Supplies: 6 q LOW QUIESCENT CURRENT: 160A q FULL-SCALE CMRR: 90dB q LOW OFFSET: 160V q HIGH SPEED: s q MicroSIZE PACKAGES: TSSOP-14 q LOW INPUT BIAS CURRENT: 1pA The OPA703 and OPA704 series op amps are optimized for applications requiring rail-to-rail input and output.

S4580P : Op-amp & Comparator , op Amp. S4580P is the dual operational amplifier, specially designed for improving the tone control, which is most suitable for the audio application. Featuring noiseless, higher gain bandwidth, high output current and low distortion ratio, and it is most suitable not only for acoustic electronic parts of audio pre-amp and active filter, but also for the industrial.

TCM129C14DW : Combined Single-chip PCM Codec And Filter. Replaces Use TCM2910A in Tandem With TCM2912C Reliable Silicon-Gate CMOS Technology Low Power Consumption: Operating Mode. 80 mW Typical Power-Down Mode. 5 mW Typical Excellent Power-Supply Rejection Ratio Over Frequency Range to 50 kHz No External Components Needed for Sample, Hold, and Autozero Functions Precision Internal Voltage References Direct.

THS4225D : ti THS4225, Low-distortion High-speed Rail-to-rail Output Operational Amplifier.

TL081CD : ti TL081, JFET-input General-purpose Operational Amplifier. Low Power Consumption Wide Common-Mode and Differential Voltage Ranges Low Input Bias and Offset Currents Output Short-Circuit Protection Low Total Harmonic Distortion. 0.003% Typ High Input Impedance. JFET-Input Stage Latch-Up-Free Operation High Slew Rate. 13 V/s Typ Common-Mode Input Voltage Range Includes VCC+ The TL08x JFET-input operational amplifier.

TLV2341Y : Lincmose Programmable Low-voltage Operational Amplifiers. Wide Range of Supply Voltages Over Specified Temperature Range: 8 V Fully Characterized 3 V and 5 V Single-Supply Operation Common-Mode Input-Voltage Range Extends Below the Negative Rail and up to VDD at 25C Output Voltage Range Includes Negative Rail High Input Impedance. 1012 Typ Low Noise. 25 nV/Hz Typically = 1 kHz (High-Bias Mode) ESD-Protection.

TLV2461CDBV : Family of Low-power Rail-to-rail Input/output Operational Amplifiers With Shutdown.

 
0-C     D-L     M-R     S-Z