|
Details, datasheet, quote on part number:JM38510/65706BEA
| |
Datasheet text preview:
SN54HC365, SN74HC365 HEX BUFFERS AND LINE DRIVERS WITH 3 STATE OUTPUTS
SCLS308D - JANUARY 1996 - REVISED OCTOBER 2003
D Wide Operating Voltage Range of 2 V to 6 V D High-Current 3-State Outputs Drive Bus D D D D D
Lines, Buffer-Memory Address Registers, or Drive Up To 15 LSTTL Loads True Outputs Low Power Consumption, 80-µA Max ICC Typical tpd = 10 ns ±6-mA Output Drive at 5 V Low Input Current of 1 µA Max
SN54HC365 . . . J OR W PACKAGE SN74HC365 . . . D, N, NS, OR PW PACKAGE (TOP VIEW)
description/ordering information
These hex buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The 'HC365 devices contain six independent buffers/drivers with dual-gated output-enable (OE1 and OE2) inputs. When OE1 and OE2 are both low, the devices pass noninverted data from the A inputs to the Y outputs. If either (or both) output-enable terminal(s) is high, the outputs are in the high-impedance state.
OE1 A1 Y1 A2 Y2 A3 Y3 GND
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9
VCC OE2 A6 Y6 A5 Y5 A4 Y4
SN54HC365 . . . FK PACKAGE (TOP VIEW)
A1 OE1 NC VCC OE2 Y1 A2 NC Y2 A3
4 5 6 7 8 3 2 1 20 19 18 17 16 15 14 9 10 11 12 13
A6 Y6 NC A5 Y5
NC - No internal connection
ORDERING INFORMATION
TA PDIP - N PACKAGE Tube of 25 Tube of 40 SOIC - D -40°C to 85°C SOP - NS Reel of 2500 Reel of 250 Reel of 2000 Reel of 90 TSSOP - PW CDIP - J -55°C to 125 C 125°C CFP - W LCCC - FK Reel of 2000 Reel of 250 Tube of 25 Tube of 150 Tube of 55 ORDERABLE PART NUMBER SN74HC365N SN74HC365D SN74HC365DR SN74HC365DT SN74HC365NSR SN74HC365PW SN74HC365PWR SN74HC365PWT SNJ54HC365J SNJ54HC365W SNJ54HC365FK SNJ54HC365J SNJ54HC365W HC365 HC365 HC365 TOP-SIDE MARKING SN74HC365N
SNJ54HC365FK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
On products compliant to MIL PRF 38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
Copyright 2003, Texas Instruments Incorporated
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
Y3 GND NC Y4 A4
1
SCLS308D - JANUARY 1996 - REVISED OCTOBER 2003
SN54HC365, SN74HC365 HEX BUFFERS AND LINE DRIVERS WITH 3 STATE OUTPUTS
FUNCTION TABLE (each buffer/driver) INPUTS OE1 H X L L OE2 X H L L A X X H L OUTPUT Y Z Z H L
logic diagram (positive logic)
OE1 OE2 1 15
A1
2
3
Y1
To Five Other Channels Pin numbers shown are for the D, J, N, NS, PW, and W packages.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 7 V Input clamp current, IIK (VI VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Output clamp current, IOK (VO VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±35 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±70 mA Package thermal impedance, JA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67°C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65°C to 150°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7.
2
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
SN54HC365, SN74HC365 HEX BUFFERS AND LINE DRIVERS WITH 3 STATE OUTPUTS
SCLS308D - JANUARY 1996 - REVISED OCTOBER 2003
recommended operating conditions (see Note 3)
SN54HC365 MIN VCC VIH Supply voltage VCC = 2 V VCC = 4.5 V VCC = 6 V VCC = 2 V VIL VI VO t/v Low-level input voltage Input voltage Output voltage VCC = 2 V VCC = 4.5 V VCC = 6 V VCC = 4.5 V VCC = 6 V 0 0 2 1.5 3.15 4.2 0.5 1.35 1.8 VCC VCC 1000 500 400 0 0 NOM 5 MAX 6 SN74HC365 MIN 2 1.5 3.15 4.2 0.5 1.35 1.8 VCC VCC 1000 500 400 ns V V V V NOM 5 MAX 6 UNIT V
High-level input voltage
Input transition rise/fall time
TA Operating free-air temperature -55 125 -40 85 °C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS VCC 2V IOH = -20 µA VOH VI = VIH or VIL IOH = -6 mA IOH = -7.8 mA IOL = 20 µA VOL VI = VIH or VIL IOL = 6 mA IOL = 7.8 mA II IOZ ICC Ci VI = VCC or 0 VO = VCC or 0 VI = VCC or 0, IO = 0 4.5 V 6V 4.5 V 6V 2V 4.5 V 6V 4.5 V 6V 6V 6V 6V 2 V to 6 V 3 TA = 25°C MIN TYP MAX 1.9 4.4 5.9 3.98 5.48 1.998 4.499 5.999 4.3 5.8 0.002 0.001 0.001 0.17 0.15 ±0.1 ±0.01 0.1 0.1 0.1 0.26 0.26 ±100 ±0.5 8 10 SN54HC365 MIN 1.9 4.4 5.9 3.7 5.2 0.1 0.1 0.1 0.4 0.4 ±1000 ±10 160 10 MAX SN74HC365 MIN 1.9 4.4 5.9 3.84 5.34 0.1 0.1 0.1 0.33 0.33 ±1000 ±5 80 10 nA µA µA pF V V MAX UNIT
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
3
SCLS308D - JANUARY 1996 - REVISED OCTOBER 2003
SN54HC365, SN74HC365 HEX BUFFERS AND LINE DRIVERS WITH 3 STATE OUTPUTS
switching characteristics over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 1)
PARAMETER FROM (INPUT) TO (OUTPUT) VCC 2V tpd A Y 4.5 V 6V 2V ten OE Y 4.5 V 6V 2V tdis OE Y 4.5 V 6V 2V tt Any 4.5 V 6V MIN TA = 25°C TYP MAX 50 12 10 100 26 21 50 21 19 28 8 6 95 19 16 190 38 32 175 35 30 60 12 10 SN54HC365 MIN MAX 145 29 25 285 57 48 265 53 45 90 18 15 SN74HC365 MIN MAX 120 24 20 238 48 41 240 48 41 75 15 13 ns ns ns ns UNIT
switching characteristics over recommended operating free-air temperature range, CL = 150 pF (unless otherwise noted) (see Figure 1)
PARAMETER FROM (INPUT) TO (OUTPUT) VCC 2V tpd A Y 4.5 V 6V 2V ten OE Y 4.5 V 6V 2V tt Any 4.5 V 6V TA = 25°C MIN TYP MAX 70 17 14 140 30 28 45 17 13 120 24 20 230 46 39 210 42 36 SN54HC365 MIN MAX 180 36 31 345 69 59 315 63 53 SN74HC365 MIN MAX 150 30 25 285 57 48 265 53 45 ns ns ns UNIT
operating characteristics, TA = 25°C
PARAMETER Cpd Power dissipation capacitance per buffer/driver TEST CONDITIONS No load TYP 35 UNIT pF
4
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
SN54HC365, SN74HC365 HEX BUFFERS AND LINE DRIVERS WITH 3 STATE OUTPUTS
SCLS308D - JANUARY 1996 - REVISED OCTOBER 2003
PARAMETER MEASUREMENT INFORMATION
VCC PARAMETER Test Point S1 RL ten tPZH tPZL tPHZ tPLZ 1 k RL CL 50 pF or 150 pF 50 pF 50 pF or 150 pF S1 Open Closed Open Closed -- Open S2 Closed Open Closed Open Open
From Output Under Test CL (see Note A)
S2
tdis
1 k
tpd or tt LOAD CIRCUIT VCC Input 50% tPLH In-Phase Output 50% 10% tPHL Out-of-Phase Output 90% 50% 10% tf 90% tr tPLH 50% 10% 90% tr VOH VOL 50% 0V tPHL 90% VOH 50% 10% V OL tf
Output Control (Low-Level Enabling) tPZL Output Waveform 1 (See Note B) tPZH
VCC 50% 50% 0V tPLZ VCC 50% 10% tPHZ 50% 90% VOH 0 V VCC VOL
VOLTAGE WAVEFORMS PROPAGATION DELAY AND OUTPUT TRANSITION TIMES VCC 50% 10% 0 V tf
Input
50% 10%
90%
90%
Output Waveform 2 (See Note B)
tr VOLTAGE WAVEFORM INPUT RISE AND FALL TIMES
VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES FOR 3-STATE OUTPUTS
NOTES: A. CL includes probe and test-fixture capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following characteristics: PRR 1 MHz, ZO = 50 , tr = 6 ns, tf = 6 ns. D. The outputs are measured one at a time with one input transition per measurement. E. tPLH and tPHL are the same as tpd. F. tPLZ and tPHZ are the same as tdis. G. tPZL and tPZH are the same as ten.
Figure 1. Load Circuit and Voltage Waveforms
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
5
|
|
