|
|
Part: LT1013AMJGB
Category:
Analog & Mixed-Signal Processing
-> Amplifiers
-> Operational Amplifiers
Description: ti LT1013A, Dual Precision Operational Amplifier
Company: Texas Instruments, Inc.
Datasheet: Download LT1013AMJGB datasheet File size : 883 kB
Request For quote: Find where to buy LT1013AMJGB
Datasheet text preview:
LT1013, LT1013A, LT1013D DUAL PRECISION OPERATIONAL AMPLIFIERS
SLOS018E MAY 1988 REVISED SEPTEMBER 2001
D D D D D D D D
Single-Supply Operation Input Voltage Range Extends to Ground Output Swings to Ground While Sinking Current Input Offset Voltage 150 µV Max at 25°C for LT1013A Offset Voltage Temperature Coefficient 2.5 µV/°C Max for LT1013A Input Offset Current 0.8 nA Max at 25°C for LT1013A High Gain . . . 1.5 V/µV Min (RL = 2 k), 0.8 V/µV Min (RL = 600 k) for LT1013A Low Supply Current . . . 0.5 mA Max at TA = 25°C for LT1013A Low Peak-to-Peak Noise Voltage . . . 0.55 µV Typ Low Current Noise . . . 0.07 pA/Hz Typ
D PACKAGE (TOP VIEW)
1IN+ VCC 2IN+ 2IN
1 2 3 4
8 7 6 5
1IN 1OUT VCC+ 2OUT
FK PACKAGE (TOP VIEW)
NC 1IN NC 1IN+ NC
4 5 6 7 8
3 2 1 20 19 18 17 16 15 14 9 10 11 12 13
NC 1OUT NC V CC+ NC NC 2OUT NC 2IN NC
NC No internal connection JG OR P PACKAGE (TOP VIEW)
description
The LT1013 devices are dual precision operational amplifiers, featuring high gain, low supply current, low noise, and low-offset-voltage temperature coefficient. The LT1013 devices can be operated from a single 5-V power supply; the common-mode input voltage range includes ground, and the output can also swing to within a few millivolts of ground. Crossover distortion is eliminated. The LT1013 can be operated with both dual ±15-V and single 5-V supplies.
1OUT 1IN 1IN+ VCC
NC VCC NC 2IN+ NC
1 2 3 4 8 7 6 5
VCC+ 2OUT 2IN 2IN+
The LT1013C and LT1013AC, and LT1013D are characterized for operation from 0°C to 70°C. The LT1013I and LT1013AI, and LT1013DI are characterized for operation from 40°C to 105°C. The LT1013M and LT1013AM, and LT1013DM are characterized for operation over the full military temperature range of 55°C to 125°C.
AVAILABLE OPTIONS TA VIOmax AT 25°C (µV) 150 300 800 150 300 800 150 300 800 PACKAGED DEVICES SMALL OUTLINE (D) -- -- LT1013DD -- -- LT1013DID -- -- LT1013DMD CHIP CARRIER (FK) -- -- -- -- -- -- LT1013AMFK -- -- CERAMIC DIP (JG) -- -- -- -- -- -- LT1013AMJG LT1013MJG LT1013DMJG PLASTIC DIP (P) LT1013ACP LT1013CP LT1013DP LT1013AIP LT1013IP LT1013DIP -- -- --
0°C to 70°C
40°C to 105°C
55°C to 125°C
The D package is available taped and reeled. Add the suffix R to the device type (e.g., LT1013DDR). Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Copyright 2001, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
1
SLOS018E - MAY 1988 - REVISED SEPTEMBER 2001
LT1013, LT1013A, LT1013D DUAL PRECISION OPERATIONAL AMPLIFIERS
schematic (each amplifier)
VCC+ 9 k 9 k 1.6 k 1.6 k 1.6 k 100 1 k 800
2
POST OFFICE BOX 655303 · DALLAS, TEXAS 75265
Template Release Date: 71194
Q5 Q6 Q13 Q16 Q14 Q15 Q32 Q30 Q35
Q36
Q3 Q25 Q4 Q33 3.9 k Q1 400 IN Q21 400 IN+ Q22 Q11 Q8 Q9 Q7 10 pF Q17 Q20 75 pF 5 k 5 k 2 k 1.3 k VCC Component values are nominal. 2 k Q12 Q29 Q10 Q19 2 k 10 pF Q23 Q24 42 k 30 Q34 Q18 4 pF Q31 Q40 Q2 Q28 Q27 21 pF 2.5 pF 2.4 k Q26 18 14 k Q37
J1
Q41
Q38 OUT
Q39
600
LT1013, LT1013A, LT1013D DUAL PRECISION OPERATIONAL AMPLIFIERS
SLOS018E MAY 1988 REVISED SEPTEMBER 2001
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage (see Note 1): VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V Input voltage range, VI (any input, see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC 5 V to VCC+ Differential input voltage (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±30 V Duration of short-circuit current at (or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Package thermal impedance, JA (see Note 4): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97°C/W P package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85°C/W Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or P package . . . . . . . . . . . . . . . . . 260°C JG package . . . . . . . . . . . . . . . . . . . 300°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC. 2. Differential voltages are at IN+ with respect to IN. 3. The output may be shorted to either supply. 4. The package thermal impedance is calculated in accordance with JESD 51-7.
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
3
electrical characteristics at specified free-air temperature, VCC± = ±15 V, VIC = 0 (unless otherwise noted)
PARAMETER VIO Input offset voltage offset voltage Temperature coefficient of input offset voltage Long-term drift of input offset voltage IIO IIB Input offset current offset current Input bias current bias current TEST CONDITIONS CONDITIONS RS = 50 50 TA 25°C Full range Full range range 25°C 25°C Full range 25°C Full range 25°C VICR Common-mode input voltage range input voltage range Full range g 25°C Full range RL = 600 RL = 2 k k 25°C 25°C Full range 25°C Full range 25°C Full range 25°C 25°C 25°C 25°C Full range 15 to 13.5 15 to 13 ±12.5 ±12 0.5 1.2 0.7 97 94 100 97 120 70 137 300 4 0.35 0.55 0.7 117 114 0.2 7 ±14 15.3 to 13.8 15 0.4 0.5 0.2 1.5 2.8 30 38 15 to 13.5 15 to 13 ±13 ±12.5 0.8 1.5 1 100 98 103 101 123 100 140 400 5 0.35 0.5 0.55 120 117 2.5 8 ±14 15.3 to 13.8 12 MIN LT1013C MAX TYP 60 300 400 2.5 0.3 0.4 0.15 0.8 1.5 20 25 15 to 13.5 15 to 13 ±12.5 ±12 0.5 1.2 0.7 97 94 100 97 120 70 137 300 4 0.35 0.55 0.6 117 114 dB dB dB M G mA 2 7 V/µV ±14 15.3 to 13.8 V 15 MIN LT1013AC MAX TYP 40 150 240 2 0.7 0.5 0.2 1.5 2.8 30 38 MIN LT1013DC MAX TYP 200 800 1000 5 UNIT µV µV/°C µV/mo nA nA
SLOS018E - MAY 1988 - REVISED SEPTEMBER 2001
LT1013, LT1013A, LT1013D DUAL PRECISION OPERATIONAL AMPLIFIERS
4
POST OFFICE BOX 655303 · DALLAS, TEXAS 75265
Template Release Date: 71194
aV
IO
VOM
Maximum peak output voltage swing peak output voltage swing
RL = 2 k k VO = ±10 V, VO = ±10 V, ±10 V
V
AVD
Large-signal differential voltage diff ti l lt amplification
CMRR kSVR
Common-mode rejection ratio rejection ratio Supply-voltage rejection ratio j (VCC/VIO) Channel separation Differential input resistance Common-mode input resistance Supply current per amplifier current per amplifier
VIC = 15 V to 13.5 V VIC = 14.9 V to 13 V VCC+ = ±2 V to ±18 V ±2 to ±18 VO = ±10 V, RL = 2 k
rid ric ICC
Full range is 0°C to 70°C. All typical values are at TA = 25°C.
electrical characteristics at specified free-air temperature, VCC+ = 5 V, VCC = 0, VO = 1.4 V, VIC = 0 (unless otherwise noted)
PARAMETER VIO IIO IIB Input offset voltage offset voltage Input offset current offset current Input bias current bias current TEST CONDITIONS CONDITIONS RS = 50 50 TA 25°C Full range 25°C Full range 25°C Full range 25°C VICR
POST OFFICE BOX 655303 · DALLAS, TEXAS 75265
LT1013C MIN TYP MAX 90 0.3 18 450 570 2 6 50 90 0 to 3.5 0 to 3 15 5 220 4 3.4 3.2 1 0.32 0.5 0.55 4.4 4 25 10 13 350 0.3 to 3.8
LT1013AC MIN TYP MAX 60 0.2 15 250 350 1.3 3.5 35 55 0 to 3.5 0 to 3 15 5 220 4 3.4 3.3 1 0.31 0.45 0.5 4.4 4 25 10 13 350 0.3 to 3.8
LT1013DC MIN TYP MAX 250 0.3 18 950 1200 2 6 50 90 0 to 3.5 0 to 3 15 5 220 4 3.4 3.2 1 0.32 0.5 0.55 4.4 4 25 10 13 350 0.3 to 3.8
UNIT µV nA nA
Common-mode input voltage g range Full range g Output low, Output low, , RL = 600 to GND No load 25°C 25°C Full range Isink = 1 mA No load 25°C 25°C 25°C Full range RL = 500 500 25°C 25°C Full range
V
mV
VOM
Maximum peak output voltage k t t lt swing
Output low, Output high, Output high, g, RL = 600 to GND
LT1013, LT1013A, LT1013D DUAL PRECISION OPERATIONAL AMPLIFIERS
V
AVD ICC
Large-signal differential voltage amplification Supply current per amplifier current per amplifier
VO = 5 mV to 4 V, mV to V
V/µV
SLOS018E - MAY 1988 - REVISED SEPTEMBER 2001
mA
Full range is 0°C to 70°C. All typical values are at TA = 25°C.
operating characteristics, VCC± =±15 V, VIC = 0, TA = 25°C
PARAMETER SR Vn VN(PP) In Slew rate Equivalent input noise voltage input noise voltage Peak-to-peak equivalent input noise voltage Equivalent input noise current f = 10 Hz f = 1 kHz f = 0.1 Hz to 10 Hz f = 10 Hz TEST CONDITIONS MIN 0.2 TYP 0.4 24 22 0.55 0.07 MAX UNIT V/µs nV/Hz µV pA/Hz
5
Others parts begin by lt
LT-1 LT-2 LT-3 LT-4 LT-5 LT-6 LT-7 LT-8 LT-9 LT-10 LT-11 LT-12 LT-13 LT-14 LT-15 LT-16 LT-17 LT-18 LT-19 LT-20 LT-21 LT-22 LT-23 LT-24 LT-25 LT-26 LT-27 LT-28 LT-29 LT-30 LT-31 LT-32 LT-33 LT-34 LT-35 LT-36 LT-37 LT-38 LT-39 LT-40 LT-41 LT-42 LT-43 LT-44 LT-45 LT-46 LT-47 LT-48 LT-49 LT-50 LT-51 LT-52 LT-53 LT-54 LT-55
|
|
|
