Digchip : Database on electronics components
 
Member, Distributor  
Log In
Email:
Password:


Part: MAX211IDW

Category:
 Interface and Interconnect
   -> RS-232 (EIA-232)

Description: ti MAX211, 5-V Multichannel RS-232 Line Driver/receiver With 115-kV Esd Protection

Company: Texas Instruments, Inc.

Datasheet: Download MAX211IDW datasheet     File size : 594 kB

Request For quote: Find where to buy MAX211IDW



Datasheet text preview:
MAX211 5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION
SLLS567C ­ MAY 2003 ­ REVISED AUGUST 2003
D D D D D D D D D D
ESD Protection for RS-232 Bus Pins ­ ±15 kV, Human-Body Model Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards Operates at 5-V VCC Supply Four Drivers and Five Receivers Operates Up To 120 kbit/s Low Supply Current in Shutdown Mode . . . 1 µA Typical External Capacitors . . . 4 × 0.1 µF Designed to Be Interchangeable With Maxim MAX211 Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II Applications ­ Battery-Powered Systems, PDAs, Notebooks, Laptops, Palmtop PCs, and Hand-Held Equipment
DB OR DW PACKAGE (TOP VIEW)
DOUT3 DOUT1 DOUT2 RIN2 ROUT2 DIN2 DIN1 ROUT1 RIN1 GND VCC C1+ V+ C1­
1 2 3 4 5 6 7 8 9 10 11 12 13 14
28 27 26 25 24 23 22 21 20 19 18 17 16 15
DOUT4 RIN3 ROUT3 SHDN EN RIN4 ROUT4 DIN4 DIN3 ROUT5 RIN5 V­ C2­ C2+
description/ordering information
The MAX211 device consists of four line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate. The MAX211 has both shutdown (SHDN) and enable control (EN). In shutdown mode, the charge pumps are turned off, V+ is pulled down to VCC, V­ is pulled to GND, and the transmitter outputs are disabled. This reduces supply current typically to 1 µA. EN is used to put the receiver outputs into the high-impedance state to allow wired-OR connection of two RS-232 ports. It has no effect on the RS-232 drivers or the charge pumps. ORDERING INFORMATION
TA SOIC (DW) 0°C to 70 C 70°C SSOP (DB) SOIC (DW) ­40°C to 85 C 85°C SSOP (DB) PACKAGE Tube of 20 Reel of 1000 Tube of 50 Reel of 2000 Tube of 20 Reel of 1000 Tube of 50 Reel of 2000 ORDERABLE PART NUMBER MAX211CDW MAX211CDWR MAX211CDB MAX211CDBR MAX211IDW MAX211IDWR MAX211IDB MAX211IDBR TOP-SIDE MARKING MAX211C MAX211C MAX211I MAX211I
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2003, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
1
SLLS567C ­ MAY 2003 ­ REVISED AUGUST 2003
MAX211 5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION
Function Tables
INPUTS SHDN L L H EN L H X DRIVER All active All active Z RECEIVER All active Z Z DEVICE STATUS Normal operation Normal operation Shutdown
X = don't care, Z = high impedance EACH DRIVER INPUTS DIN L H X SHDN L L H OUTPUT DOUT H L Z DRIVER STATUS Normal operation Powered off
X = don't care, Z = high impedance EACH RECEIVER INPUTS RIN L H X EN L L H OUTPUT ROUT H L Z RECEIVER STATUS Normal operation Powered off
X = don't care, Z = high impedance
2
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
MAX211 5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION
SLLS567C ­ MAY 2003 ­ REVISED AUGUST 2003
logic diagram (positive logic)
7 DIN1 6 DIN2 TTL/CMOS Inputs DIN3 21 DIN4 28 DOUT4 20 1 DOUT3 3 DOUT2 RS-232 Outputs 2 DOUT1
25
SHDN
8 ROUT1
9 RIN1
5 ROUT2
4 RIN2
26 TTL/CMOS Outputs ROUT3
27 RIN3
RS-232 Inputs
22 ROUT4
23 RIN4
19 ROUT5 24 EN
18 RIN5
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
3


Others parts begin by ma