Details, datasheet, quote on part number: MSP430F1111AIRGE
PartMSP430F1111AIRGE
CategoryMicrocontrollers => Ultra-Low Power Microcontrollers
TitleUltra-Low Power Microcontrollers
Descriptionti MSP430F1111A, 16-bit Ultra-low-power Microcontroller, 2kB Flash, 128B RAM, Comparator
CompanyTexas Instruments, Inc.
DatasheetDownload MSP430F1111AIRGE datasheet
Quote
Find where to buy
 
  

 

Features, Applications

- Active Mode: at 1 MHz, V - Standby Mode: A - Off Mode (RAM Retention): 0.1 A Wake-Up From Standby Mode in less than s 16-Bit RISC Architecture, 125 ns Instruction Cycle Time Basic Clock Module Configurations: - Various Internal Resistors - Single External Resistor - 32-kHz Crystal - High-Frequency Crystal - Resonator - External Clock Source 16-Bit Timer_A With Three Capture/Compare Registers

No External Programming Voltage Needed Programmable Code Protection by Security Fuse Family Members Include: MSP430C1101: 1KB ROM, 128B RAM MSP430C1111: 2KB ROM, 128B RAM MSP430C1121: 4KB ROM, 256B RAM + 128B Flash Memory 128B RAM + 256B Flash Memory 128B RAM + 256B Flash Memory 256B RAM Available a 20-Pin Plastic Small-Outline Wide Body (SOWB) Package, 20-Pin Plastic Small-Outline Thin Package, 20-Pin TVSOP (F11x1A only) and 24-Pin QFN For Complete Module Descriptions, Refer to the MSP430x1xx Family User's Guide, Literature Number SLAU049

Components On-Chip Comparator for Analog Signal Compare Function or Slope A/D Conversion
description

The Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6s. The MSP430x11x1 series is an ultralow-power mixed signal microcontroller with a built-in 16-bit timer, versatile analog comparator and fourteen I/O pins. Typical applications include sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system. Stand alone RF sensor front end is another area of application. The I/O port inputs provide single slope A/D conversion capability on resistive sensors.

AVAILABLE OPTIONS PACKAGED DEVICES TA PLASTIC 20-PIN SOWB (DW) MSP430F1111AIDW MSP430F1121AIDW PLASTIC 20-PIN TSSOP (PW) MSP430F1111AIPW MSP430F1121AIPW PLASTIC 20-PIN TVSOP (DGV) MSP430F1111AIDGV MSP430F1121AIDGV PLASTIC 24-PIN QFN (RGE) MSP430F1111AIRGE MSP430F1121AIRGE

Product Preview Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

1/2/4 KB ROM/ Flash+126/256B Flash INFO 'C': ROM 'F': Flash

8 I/O Port P1 8 I/O's, All With Interrupt Capabililty JTAG MCLK MAB, 16 Bit MAB, 4 Bit MCB MDB, 16 Bit Bus Conv. MDB, 8 Bit CPU Incl. 16 Reg. Test JTAG TEST Watchdog Timer ACLK SMCLK Timer_A 3 CC Register CCR0/1/2 x TACLK or INCLK CCI1 Outx CCIx INCLK Comparator-A Input Multiplexer CCI1 RC Filtered O/P Out0 Internal Vref Analog Switch CCI0 I/O Port P2 6 I/O's All With Interrupt Capabililty

TERMINAL NAME P2.4/CA1/TA2 P2.5/Rosc RST/NMI TEST VCC VSS XIN DW, PW, or DGV NO. RGE NO. I I/O I DESCRIPTION General-purpose digital I/O pin/Timer_A, clock signal TACLK input General-purpose digital I/O pin/Timer_A, capture: CCI0A input, compare: Out0 output/BSL transmit General-purpose digital I/O pin/Timer_A, capture: CCI1A input, compare: Out1 output General-purpose digital I/O pin/Timer_A, capture: CCI2A input, compare: Out2 output General-purpose digital I/O pin/SMCLK signal output/test clock, input terminal for device programming and test General-purpose digital I/O pin/Timer_A, compare: Out0 output/test mode select, input terminal for device programming and test General-purpose digital I/O pin/Timer_A, compare: Out1 output/test data input terminal General-purpose digital I/O pin/Timer_A, compare: Out2 output/test data output terminal or data input during programming General-purpose digital I/O pin/ACLK output General-purpose digital I/O pin/Timer_A, clock signal at INCLK General-purpose digital I/O pin/Timer_A, capture: CCI0B input/ comparator_A, output/BSL receive General-purpose digital I/O pin/Timer_A, compare: Out1 output/ comparator_A, input General-purpose digital I/O pin/Timer_A, compare: Out2 output/ comparator_A, input General-purpose digital I/O pin/input for external resistor that defines the DCO nominal frequency Reset or nonmaskable interrupt input Selects test mode for JTAG pins on Port1. The device protection fuse is connected to TEST. Supply voltage Ground reference Input terminal of crystal oscillator Output terminal of crystal oscillator


 

Related products with the same datasheet
MSP430F1111AIDGVR
MSP430F1111AIDW
MSP430F1111AIDWR
MSP430F1111AIPW
MSP430F1111AIPWR
Some Part number from the same manufacture Texas Instruments, Inc.
MSP430F112
MSP430F1121 Ultra-low-power Microcontrollers
MSP430F1121A Ultra-low Power Microcontroller
MSP430F1121AIDGV ti MSP430F1121A, 16-bit Ultra-low-power Microcontroller, 4kB Flash, 256B RAM, Comparator
MSP430F1121IDW Ultra-low-power Microcontrollers
MSP430F1122 Ultra-low Power Microcontroller
MSP430F1122IDW ti MSP430F1122, 16-bit Ultra-low-power Microcontroller, 4kB Flash, 256B RAM, 10 Bit ADC
MSP430F112IDW ti MSP430F112, 16-Bit Ultra-low-power Microcontroller, 4kB Flash, 256B RAM
MSP430F1132 Ultra-low Power Microcontroller
MSP430F1132IDW ti MSP430F1132, 16-bit Ultra-low-power Microcontroller, 8kB Flash, 256B RAM, 10 Bit ADC
MSP430F11X Ultra-low-power Microcontrollers
MSP430F122
MSP430F122 Ultra-low Power Microcontroller
MSP430F1222
MSP430F1222IDW ti MSP430F1222, 16-bit Ultra-low-power Microcontroller, 4kB Flash, 256B RAM, 10 Bit ADC, 1 Usart
MSP430F122IDW ti MSP430F122, 16-Bit Ultra-low-power Microcontroller, 4kB Flash, 256B RAM, Usart, Comparator
MSP430F123
MSP430F123 Ultra-low Power Microcontroller
MSP430F1232
MSP430F1232IDW ti MSP430F1232, 16-bit Ultra-low-power Microcontroller, 8kB Flash, 256B RAM, 10 Bit ADC, 1 Usart
MSP430F123IDW ti MSP430F123, 16-Bit Ultra-low-power Microcontroller, 8kB Flash, 256B RAM, Usart, Comparator

5962-8775901MSA : Inverting Buffers and Drivers ti SN54ACT240, Octal Buffers/drivers With 3-State Outputs

SN74LS00DR : ti SN74LS00, Quad 2-input Positive-nand Gates

TL16PNP100AFNR : ti TL16PNP100A, Standalone PNP Controller, Supports Two Logical Devices

SN74LS30DG4 : Logic - Gate And Inverter Integrated Circuit (ics) NAND Gate Tube 400A, 8mA 4.75 V ~ 5.25 V; IC 8-IN POS-NAND GATE 14-SOIC Specifications: Number of Circuits: 1 ; Package / Case: 14-SOIC (0.154", 3.90mm Width) ; Logic Type: NAND Gate ; Packaging: Tube ; Mounting Type: Surface Mount ; Number of Inputs: 8 ; Current - Output High, Low: 400A, 8mA ; Operating Temperature: 0C ~ 70C ; Voltage - Supply: 4.75 V ~ 5.25 V ; Lea

74FCT162827ATPACT : Non-Inverting Buffers and Drivers ti CY74FCT162827T, 20-Bit Buffers/drivers With 3-State Outputs

TCA6408ARSVR : Interface - I/o Expander Integrated Circuit (ics) Cut Tape (CT) 1.65 V ~ 5.5 V; IC I/O EXPANDER I2C 8B 16QFN Specifications: Interface: I²C, SMBus ; Number of I /O: 8 ; Frequency - Clock: 400kHz ; Voltage - Supply: 1.65 V ~ 5.5 V ; Package / Case: 16-UFQFN ; Packaging: Cut Tape (CT) ; Operating Temperature: -40C ~ 85C ; Interrupt Output: Yes ; Lead Free Status: Lead Free ; RoHS Status: RoHS Comp

AM26LS31MJB : QUAD LINE DRIVER, PDSO16 Specifications: Technology: RS422, BIPOLAR ; Device Type: Line / Bus Driver ; Supply Voltage: 5V ; Operating Temperature: 0 to 70 C (32 to 158 F) ; Package Type: SOIC, GREEN, PLASTIC, MS-012AC, SOIC-16 ; Pins: 16 ; Features: RoHS

BQ24165RGET : 1-CHANNEL POWER SUPPLY SUPPORT CKT, PQCC24 Specifications: Package Type: Other, 4 X 4 MM, GREEN, PLASTIC, VQFN-24 ; Operating Temperature: -40 to 85 C (-40 to 185 F)

 
0-C     D-L     M-R     S-Z