|Category||Microcontrollers => Ultra-Low Power Microcontrollers|
|Title||Ultra-Low Power Microcontrollers|
|Description||ti MSP430F112, 16-Bit Ultra-low-power Microcontroller, 4kB Flash, 256B RAM|
|Company||Texas Instruments, Inc.|
|Datasheet||Download MSP430F112IDW datasheet
Low Supply Voltage Range 3.6 V Ultralow-Power Consumption: Active Mode: at 1 MHz, V Standby Mode: µA Off Mode (RAM Retention): 0.1 µA Wake-Up From Standby Mode µs 16-Bit RISC Architecture, 125 ns Instruction Cycle Time Basic Clock Module Configurations: Various Internal Resistors Single External Resistor 32 kHz Crystal High Frequency Crystal Resonator External Clock Source 16-Bit Timer_A With Three Capture/Compare Registers Serial Onboard Programming, No External Programming Voltage Needed
Family Members Include: + 128B Flash Memory 128B RAM + 256B Flash Memory 256B RAM Available a 20-Pin Plastic Small-Outline Wide Body (SOWB) Package and 20-Pin Plastic Thin Shrink Small-Outline Package (TSSOP) For Complete Module Descriptions, Refer to the MSP430x1xx Family User's Guide, Literature Number SLAU049description
The Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6µs. The MSP430F11x series is an ultralow-power mixed signal microcontroller with a built in 16-bit timer and fourteen I/O pins. Typical applications include sensor systems that capture analog signals, convert them to digital values, and then process the data and display them or transmit them to a host system. Stand alone RF sensor front-end is another area of application.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
AVAILABLE OPTIONS PACKAGED DEVICES TA PLASTIC 20-PIN SOWB (DW) MSP430F110IDW MSP430F112IDW PLASTIC 20-PIN TSSOP (PW) MSP430F110IPW MSP430F112IPW
8 Rosc Oscillator System Clock ACLK SMCLK 1/4 KB Flash +126/256B Flash INFO 128/256B RAM Power-onReset Outx CCIxA TACLK SMCLK I/O Port P1 8 I/O's, All With Interrupt Capabililty JTAGMCLK MAB, 16 Bit MAB, 4 Bit MCB MDB, 16 Bit Bus Conv. MDB, 8 Bit
INCLK I/O Port P2 6 I/O's All With Interrupt Capabililty
TERMINAL NAME P2.4/TA2 P2.5/Rosc RST/NMI TEST VCC VSS XIN NO. I I/O I General-purpose digital I/O pin/Timer_A, clock signal TACLK input General-purpose digital I/O pin/Timer_A, capture: CCI0A input, compare: Out0 output General-purpose digital I/O pin/Timer_A, capture: CCI1A input, compare: Out1 output General-purpose digital I/O pin/Timer_A, capture: CCI2A input, compare: Out2 output General-purpose digital I/O pin/SMCLK signal output/test clock, input terminal for device programming and test General-purpose digital I/O pin/Timer_A, compare: Out0 output/test mode select, input terminal for device programming and test General-purpose digital I/O pin/Timer_A, compare: Out1 output/test data input terminal General-purpose digital I/O pin/Timer_A, compare: Out2 output/test data output terminal or data input during programming General-purpose digital I/O pin/ACLK output General-purpose digital I/O pin/Timer_A, clock signal at INCLK General-purpose digital I/O pin/Timer_A, capture: CCI0B input, compare: Out0 output General-purpose digital I/O pin/Timer_A, capture: CCI1B input, compare: Out1 output General-purpose digital I/O pin/Timer_A, compare: Out2 output General-purpose digital I/O pin/Input for external resistor that defines the DCO nominal frequency Reset or nonmaskable interrupt input Select of test mode for JTAG pins on Port1. Must be tied low with less than 30 k. Supply voltage Ground reference Input terminal of crystal oscillator I/O DESCRIPTION
XOUT/TCLK 5 I/O Output terminal of crystal oscillator or test clock input TDO or TDI is selected via JTAG instruction.
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|MSP430F112IDWR ti MSP430F112, 16-Bit Ultra-low-power Microcontroller, 4kB Flash, 256B RAM|
|MSP430F1132 Ultra-low Power Microcontroller|
|MSP430F1132IDW ti MSP430F1132, 16-bit Ultra-low-power Microcontroller, 8kB Flash, 256B RAM, 10 Bit ADC|
|MSP430F11X Ultra-low-power Microcontrollers|
|MSP430F122 Ultra-low Power Microcontroller|
|MSP430F1222IDW ti MSP430F1222, 16-bit Ultra-low-power Microcontroller, 4kB Flash, 256B RAM, 10 Bit ADC, 1 Usart|
|MSP430F122IDW ti MSP430F122, 16-Bit Ultra-low-power Microcontroller, 4kB Flash, 256B RAM, Usart, Comparator|
|MSP430F123 Ultra-low Power Microcontroller|
|MSP430F1232IDW ti MSP430F1232, 16-bit Ultra-low-power Microcontroller, 8kB Flash, 256B RAM, 10 Bit ADC, 1 Usart|
|MSP430F123IDW ti MSP430F123, 16-Bit Ultra-low-power Microcontroller, 8kB Flash, 256B RAM, Usart, Comparator|
|MSP430F133 Ultra-low Power Microcontroller|
|MSP430F133IPAG ti MSP430F133, 16-Bit Ultra-low-power Microcontroller, 8kB Flash, 256B RAM, 12 Bit ADC, Usart|
|MSP430F135 Ultra-low Power Microcontroller|
|MSP430F135IPAG ti MSP430F135, 16-Bit Ultra-low-power Microcontroller, 16kB Flash, 512B RAM, 12 Bit ADC, Usart|
SN74S30 : Bipolar->S Family 8-input NAND Gate
TPS718XX : Dual, 200ma Output, Low Noise, High PSRR Low-dropout Linear Regulators in 2mm x 2mm SON Package
SN74AHC86DBRG4 : HEX Inverters
OPA2835IRUNT : Dual, Ultra Low Power, Rail To Rail Out, Negative Rail In, VFB Amplifier Fabricated using the industry-leading BiCom-3x (SiGe complimentary bipolar) process, the OPA835 and OPA2835 are single and dual ultra low-power, rail-to-rail output, negative rail input, voltage-feedback operational amplifiers
SN74LVC573APWG4 : 32-bit BUS Transceiver WITH 3-state Outputs
THS10082CDAG4 : ti THS10082, 10 Bit, 8 MSPS ADC W/dual Channel, Parallel DSP/up Interface, 16X Fifo, Channel Autoscan, Low Power
TAS5706APAPG4 : 20-W Stereo Digital Audio Power Amplifier With EQ And DRC The TAS5706A is a 20-W, efficient, digital audio power amplifier for driving stereo bridged-tied speakers. Two serial data inputs allow processing of up to four discrete audio channels and seamless integration to most digital audio processor
SN75ALS192DE4 : ti SN75ALS192, Quadruple Differential Line Driver
AT91M55800A : AT91 ARM Thumb. The AT91M55800A 8K Bytes of On-chip SRAM, an External Bus Interface, a 6-channel Timer/Counter, 3 Usarts, a Master/slave Spi Interface, a Watchdog Timer, an 8-channel 10-bit ADC, a 2-channel 10-bit DAC, a Clock Generator, Real-time Clock And an Advanced Power Management Controller..
DS87001 : Microcontroller Programming Adapters. The DS87001 family of programming adapters converts the pins of the high-speed microcontroller family in SMT packages to the 40-pin DIP footprint used by most device programmers. The following table details the available adapters, their part numbers and footprints, and the microcontrollers that are supported by each adapter. The DS87001 programming.
EF6805U3 : EF6801/04/05. 8-BIT Microcomputer Unit. HARDWARE 32 TTL/CMOS COMPATIBLE I/O LINES 24 BIDIRECTIONAL (8 lines are LED compatible) 8 INPUT-ONLY 3776 BYTES OF USER ROM 112 BYTES OF RAM SELF-CHECK MODE ZERO-CROSSING DETECT/INTERRUPT INTERNAL 8-BIT TIMER WITH 7-BIT SOFTWARE PROGRAMMABLE PRESCALER AND CLOCK SOURCE 5V SINGLE SUPPLY SOFTWARE 10 POWERFUL ADDRESSING MODES BYTE EFFICIENT INSTRUCTION.
GMS81C50xx : Remote Controller->Universal Remote Controller.
HE8P1704AK : with ADC. ROM Type = OTP ;; Application = MCU With ADC ;; ROM = 4K*16 ;; RAM = 256B ;; I/o = 18 ;; LCD = -.
HT46C63 : A/D with LCD Type MCU Series. HT46R63/HT46C63 8-Bit A/D With LCD Type MCU.
MB89V623 : CISC->MB. 8-bit Proprietary Microcontroller. The MB89620 series has been developed as a general-purpose version of the F2MC*-8L family consisting of proprietary 8-bit, single-chip microcontrollers. In addition to the F2MC-8L CPU core which can operate at low voltage but at high speed, the microcontrollers contain a variety of peripheral functions such as timers, serial interfaces, an A/D converter,.
MB91340 : Propietary F2MC-16F Family. 32-Bit FR Family. The MB91340/MB91V340 are standard microcontrollers that feature a 32-bit high-performance RISC CPU and a variety of built-in I/O resources and bus control mechanisms suitable for embedded control applications requiring high-capability, high-speed CPU processing. The large address space supported by the 32-bit CPU addressing means that operation is primarily.
SAF-XC161CJ-16FF : High End Microcontroller With CAN & J1850 Interface. Edition 2003-06 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München, Germany © Infineon Technologies AG 2003. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved.
SAK-C167CR-16RM : 16-bit CMOS Single-chip Microcontrollers. Subjects (compared to Data Sheet C167CR, 06.95) Incremental Interface Mode added. T3 capture trigger for CAPREL added. Controller Area Network (CAN): License of Robert Bosch GmbH Published by Siemens AG, Bereich Halbleiter, Marketing-Kommunikation Balanstraße 73, D-81541 München. © Siemens AG 1996. All Rights Reserved. As far as patents or other rights.
SAK-C167CR-16RMHA : High-end 16-bit Microcontroller With Optional On-chip CAN. Edition 2001-07 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München, Germany All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties,.
ST72331 : ST7 Family. 8-BIT Microcontroller (MCU) With 8/16K ROM/OTP/EPROM,256 EEPROM,384/512 Bytes RAM,adc,wdg,sci,spi & 2 Timers - SDIP42/56, QFP44/64.
TMP87CM38N/F : TLCS-870 Series.
Z86C03 : CMOS z8 8-bit CCP Consumer Controller Processors. Software-Enabled Watch-Dog Timer Power-On Reset Timer Two Standby Modes: STOP and HALT Two Comparators with Programmable Interrupt Polarity 14 Input/Output Lines (Two with Comparator Inputs) On-Chip Oscillator that Accepts a Crystal, Ceramic Resonator, LC, RC, or External Clock Drive. Serial Peripheral Interface (SPI) (Z86C06 Only) Software Programmable.
Z8E000 : OTP (KB) = 0.5 ;; RAM = 32 ;; Speed = 10 ;; I/O = 13 ;; 8-bit Timers = 1 ;; Comm Interfaces = -- ;; Other = -- ;; Voltage = 3.5-5.5V ;;.
HT49RA0 : The HT49RA0/HT49CA0 are 8-bit high performance, RISC architecture microcontroller devices specifically designed for multiple I/O control product applications. The mask version HT49CA0 is fully pin and functionally compatible with the OTP version HT49RA0 device. The advantages of low power consumption, I/O flexibility, timer functions, oscillator options,.
SC9636 : CD Digital Signal Processor With MCU(2 Digits LED Display) CD Digital Signal Processor with MCU(2 Digits LED Display).
HT46R75D-3 : Dual Slope A/D Type 8-Bit OTP MCU With LCD The HT46R75D-3 is an 8-bit high performance, RISC architecture microcontroller device specifically designed for A/D with LCD applications that interface directly to analog signals, such as those from sensors. The advantages of low power consumption, I/O flexibility, timer functions, oscillator options, Dual.