Details, datasheet, quote on part number: MSP430F112IPWR
PartMSP430F112IPWR
CategoryMicrocontrollers => Ultra-Low Power Microcontrollers
TitleUltra-Low Power Microcontrollers
Descriptionti MSP430F112, 16-Bit Ultra-low-power Microcontroller, 4kB Flash, 256B RAM
CompanyTexas Instruments, Inc.
DatasheetDownload MSP430F112IPWR datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Low Supply Voltage Range 3.6 V Ultralow-Power Consumption: Active Mode: at 1 MHz, V Standby Mode: A Off Mode (RAM Retention): 0.1 A Wake-Up From Standby Mode s 16-Bit RISC Architecture, 125 ns Instruction Cycle Time Basic Clock Module Configurations: Various Internal Resistors Single External Resistor 32 kHz Crystal High Frequency Crystal Resonator External Clock Source 16-Bit Timer_A With Three Capture/Compare Registers Serial Onboard Programming, No External Programming Voltage Needed

Family Members Include: + 128B Flash Memory 128B RAM + 256B Flash Memory 256B RAM Available a 20-Pin Plastic Small-Outline Wide Body (SOWB) Package and 20-Pin Plastic Thin Shrink Small-Outline Package (TSSOP) For Complete Module Descriptions, Refer to the MSP430x1xx Family User's Guide, Literature Number SLAU049

description

The Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6s. The MSP430F11x series is an ultralow-power mixed signal microcontroller with a built in 16-bit timer and fourteen I/O pins. Typical applications include sensor systems that capture analog signals, convert them to digital values, and then process the data and display them or transmit them to a host system. Stand alone RF sensor front-end is another area of application.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

AVAILABLE OPTIONS PACKAGED DEVICES TA PLASTIC 20-PIN SOWB (DW) MSP430F110IDW MSP430F112IDW PLASTIC 20-PIN TSSOP (PW) MSP430F110IPW MSP430F112IPW

8 Rosc Oscillator System Clock ACLK SMCLK 1/4 KB Flash +126/256B Flash INFO 128/256B RAM Power-onReset Outx CCIxA TACLK SMCLK I/O Port P1 8 I/O's, All With Interrupt Capabililty JTAG

MCLK MAB, 16 Bit MAB, 4 Bit MCB MDB, 16 Bit Bus Conv. MDB, 8 Bit
INCLK I/O Port P2 6 I/O's All With Interrupt Capabililty

TERMINAL NAME P2.4/TA2 P2.5/Rosc RST/NMI TEST VCC VSS XIN NO. I I/O I General-purpose digital I/O pin/Timer_A, clock signal TACLK input General-purpose digital I/O pin/Timer_A, capture: CCI0A input, compare: Out0 output General-purpose digital I/O pin/Timer_A, capture: CCI1A input, compare: Out1 output General-purpose digital I/O pin/Timer_A, capture: CCI2A input, compare: Out2 output General-purpose digital I/O pin/SMCLK signal output/test clock, input terminal for device programming and test General-purpose digital I/O pin/Timer_A, compare: Out0 output/test mode select, input terminal for device programming and test General-purpose digital I/O pin/Timer_A, compare: Out1 output/test data input terminal General-purpose digital I/O pin/Timer_A, compare: Out2 output/test data output terminal or data input during programming General-purpose digital I/O pin/ACLK output General-purpose digital I/O pin/Timer_A, clock signal at INCLK General-purpose digital I/O pin/Timer_A, capture: CCI0B input, compare: Out0 output General-purpose digital I/O pin/Timer_A, capture: CCI1B input, compare: Out1 output General-purpose digital I/O pin/Timer_A, compare: Out2 output General-purpose digital I/O pin/Input for external resistor that defines the DCO nominal frequency Reset or nonmaskable interrupt input Select of test mode for JTAG pins on Port1. Must be tied low with less than 30 k. Supply voltage Ground reference Input terminal of crystal oscillator I/O DESCRIPTION

XOUT/TCLK 5 I/O Output terminal of crystal oscillator or test clock input TDO or TDI is selected via JTAG instruction.


 

Related products with the same datasheet
MSP430F112IDWR
MSP430F112IPW
Some Part number from the same manufacture Texas Instruments, Inc.
MSP430F1132 Ultra-low Power Microcontroller
MSP430F1132IDW ti MSP430F1132, 16-bit Ultra-low-power Microcontroller, 8kB Flash, 256B RAM, 10 Bit ADC
MSP430F11X Ultra-low-power Microcontrollers
MSP430F122
MSP430F122 Ultra-low Power Microcontroller
MSP430F1222
MSP430F1222IDW ti MSP430F1222, 16-bit Ultra-low-power Microcontroller, 4kB Flash, 256B RAM, 10 Bit ADC, 1 Usart
MSP430F122IDW ti MSP430F122, 16-Bit Ultra-low-power Microcontroller, 4kB Flash, 256B RAM, Usart, Comparator
MSP430F123
MSP430F123 Ultra-low Power Microcontroller
MSP430F1232
MSP430F1232IDW ti MSP430F1232, 16-bit Ultra-low-power Microcontroller, 8kB Flash, 256B RAM, 10 Bit ADC, 1 Usart
MSP430F123IDW ti MSP430F123, 16-Bit Ultra-low-power Microcontroller, 8kB Flash, 256B RAM, Usart, Comparator
MSP430F133
MSP430F133 Ultra-low Power Microcontroller
MSP430F133IPAG ti MSP430F133, 16-Bit Ultra-low-power Microcontroller, 8kB Flash, 256B RAM, 12 Bit ADC, Usart
MSP430F135
MSP430F135 Ultra-low Power Microcontroller
MSP430F135IPAG ti MSP430F135, 16-Bit Ultra-low-power Microcontroller, 16kB Flash, 512B RAM, 12 Bit ADC, Usart
MSP430F147
MSP430F147 Ultra-low Power Microcontroller

CD4069UBE : ti CD4069UB, CMOS Hex Inverter

TMS320C6205-200 : TMS320 Family

SN74LV06APWRG4 : Quadruple2-input Positive-and Gates

74ALS996 : 8-bit D-type Edge-triggered Read-back Latches

TPS311015DVB : Ultralow Supply-current/supply-voltage Supervisory Circuits

PCM1680DBQG4 : 24-bit, 192-khz Sampling, Enhanced Multilevel Delta-sigma, Eight-channel Audio Digital-to-analog Converter

ADS7807U/1KE4 : Data Acquisition - Analog To Digital Converter (adc) Integrated Circuit (ics) 2 Single-Ended, Unipolar; 2 Single-Ended, Bipolar Tape & Reel (TR) Analog and Digital; IC 16BIT 40KHZ SMPL ADC 28-SOIC Specifications: Number of Bits: 16 ; Package / Case: 28-SOIC (0.295", 7.50mm Width) ; Data Interface: Serial, Parallel ; Packaging: Tape & Reel (TR) ; Sampling Rate (Per Second): 40k ; Operating Temperature: -40C ~ 85C ; Voltage Supply Source: Analog and Digital ; Number of Inputs and Type: 2

TRS3238ECDWG4 : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Line Transceiver Tube 3 V ~ 5.5 V; IC DVR/RCVR RS232 ESD 28SOIC Specifications: Number of Drivers/Receivers: 5/3 ; Type: Line Transceiver ; Voltage - Supply: 3 V ~ 5.5 V ; Package / Case: 28-SOIC (0.295", 7.50mm Width) ; Packaging: Tube ; Protocol: RS232 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

TLV71210DBVR : Pmic - Voltage Regulator - Linear (ldo) Integrated Circuit (ics); IC REG LDO 1V 300MA SOT23-5 Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

TPS65283-1RGET : Voltage Regulators - Switching Regulators 4.5-18Vin,3.5A/2.5A Sync Dual Buck Cnvtr Texas Instruments TPS65283 Synchronous Dual Buck Converters come in a thermally-enhanced 4mm 4mm VQFN package that is a full featured 4.5 to 18V Vin, 3.5A/2.5A output current synchronous step down DC-DC converter, which is optimized for small designs through high efficiency and integrating the

 
0-C     D-L     M-R     S-Z