Details, datasheet, quote on part number: MSP430F4270
CategorySemiconductors => Microcontrollers (MCU) => MSP430 ultra-low-power MCUs => MSP430F2x/4x
Part familyMSP430F4270 16-Bit Ultra-Low-Power MCU, 32kB Flash, 256B RAM, 16-bit sigma Delta A/D, 12-bit D/A, LCD Driver
Description16-Bit Ultra-Low-Power MCU, 32kB Flash, 256B RAM, 16-bit sigma Delta A/D, 12-bit D/A, LCD Driver 48-SSOP -40 to 85
CompanyTexas Instruments, Inc.
DatasheetDownload MSP430F4270 datasheet
Find where to buy
Timers - 32-bit0
Timers - 16-bit1
GPIO Pins(#)32
Operating Temperature Range(C)-40 to 85
Approx. Price (US$)3.65 | 1ku
Min VCC1.8
ADCSigmaDelta16 - 5ch
Max VCC3.6
FeaturesLCD,Watchdog,DAC,Temp Sensor,Brown Out Reset
Wakeup Time (us)6
Special I/ON/A
Active Power (uA/MHz)250
Standby Power (LPM3-uA)1.1
Non-volatile Memory (KB)32
Package GroupSSOP,VQFN
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
48DLSSOPR-PDSO-G25TUBEM430F4270 7.4915.882.59.635
Application notes
• MSP430 SMBus
This application report describes a software implementation of the system management bus (SMBus) for the MSP430 microcontroller. It includes all master protocols, an interrupt-driven slave, and master usage examples. SMBus is derived from the I2C and is co | Doc
• MSP430F4270 Altimeter Demo
This application report describes the implementation of an altimeter using a fullyintegrated MCU solution with the MSP430F42x0 family of microcontrollers. An air pressure sensor is directly interfaced with the MCU-integrated 16-bit sigma/delta data convert | Doc
• MSP430 Isolated FET Interface
This application report describes how to build an isolated FET interface for the MSP430 Flash Emulation Tool (FET). When developing and debugging line-powered MSP430applications such as motor control, electricity energy meters, power monitoring systems etc | Doc
• HDQ Protocol Implementation with MSP430 | Doc
• FSK Modulation and Demodulation With the Microcontroller MSP430
This application report describes a software program for performing V.23 FSK modem transceiver functions using an MSP430 microcontroller. It makes use of novel filter architecture to perform DSP functions on a processor with only shift and add capabilities | Doc
• Designing With MSP430 and Segment LCDs (Rev. A)
Segment liquid crystal displays (LCDs) are needed to provide information to users in a wide variety of applications from smart meters to electronic shelf labels (ESL) to medical equipment. Several MSP430™ microcontroller families include built-in low-pow | Doc
• Driving Large LCDs with LCD Peripheral of the MSP430 (Rev. A)
The 4xx family of MSP430™ devices has two different types of integrated LCD drivers, namely the LCD controller and the LCD_A controller.The 6xx family of MSP430 devices also has two different types of integrated LCD drivers, namely the LCD_B controller a | Doc
• MSP430 32-kHz Crystal Oscillators (Rev. D)
Selection of the right crystal, correct load circuit, and proper board layout are important for a stable crystal oscillator. This application report summarizes crystal oscillator function and explains the parameters to select the correct crystal for ultra- | Doc
• Powering the MSP430 from a High Voltage Input using the TPS62122 (Rev. C) | Doc
• Generation and Recognition of DTMF Signals With the Microcontroller MSP430
The first part of the Application Report describes the generation of DTMF signals using the Microcontroller MSP430. Following an explanation of the most important specifications which are involved, the theoretical and mathematical processes will be discuss | Doc
• Advanced Debugging Using the Enhanced Emulation Module (EEM) With CCS v6 (Rev. F) | Doc
• Simple 1.5 V Boost Converter for MSP430
A simple, efficient, low-cost, boost converter to take 1.5 V from a single type-AA alkaline battery to the operating voltage required by the MSP430 family of ultralow-power microcontrollers is described. Expected battery life is up to 1000 hours. | Doc
• Efficient MSP430 Code Synthesis for an FIR Filter
Digital filtering can be easily accomplished on the MSP430 using efficient multiplication. The tool accompanying this document automatically converts FIR filter coefficients to MSP430 assembly code that can be used in any application. Horner’s method and | Doc
• Wave Digital Filtering Using the MSP430
Digital filtering is an integral part of many digital signal processing algorithms. Digital filters are characterized as either recursive [infinite impulse response (IIR)] or non-recursive [finite impulse response (FIR)] filters. IIR filters require a smal | Doc
• Implementing a Direct Thermocouple Interface With MSP430x4xx and ADS1240 (Rev. A)
This application report describes and shows how to implement a direct thermocouple interface, without using the signal conditioning circuitry normally required for thermocouples. The thermocouple interfaces directly to the Burr Brown ADS1240, 24-bit ADC fr | Doc
• MSP Code Protection Features
MSP microcontrollers (MCUs) offer a number of features to help control code accessibility in the device, to add different layers of code access management and protection strategies. These include features that can lock or password protect the JTAG/SBW acce | Doc
• Economic Voltage Measurement With the MSP430 Family
This application report describes voltage and current measurement methods using the MSP430 universal timer/port module. The report explains the two measurement methods (charge and discharge) and shows how to measure voltage and current. The equations for t | Doc
• 1.8V – 5.5V Input, High-Efficiency DCDC Converter Reference Design for MSP430 (Rev. B)
This reference design is presented to help application designers and others who are trying to use the MSP430 in a system with an input voltage in the range of 1.8 V to 5.5 V, and who must increase the application run time by making use of the complete batt | Doc
• Design Considerations When Using the MSP430 Graphics Library
LCDs are a growing commodity in todays market with products as diverse as children's toys to medical devices. Modern LCDs, along with the graphics displayed on them, are growing in complexity. A graphics library can simplify and accelerate development whil | Doc
• Digital Fan Control With Tachometer Using MSP430
Digital Fan Control with Tachometer using MSP430 Application Report | Doc
• Use of Two MSP430s to Enhance Segment Lines for Larger LCDs (Rev. A)
This application report explains a technique that uses two MSP430™ microcontrollers to expand the maximum number of LCD segments that can be driven with a single controller. Additional benefits of the technique include increases in available memory, data | Doc
• Spread-Spectrum Clock Source Using an MSP430
While spread-spectrum clocking has long since been used in processor and memory clock trees, there are many other clocked systems, such as power supplies or switch-mode amplifiers, that continue to use a single-frequency clock. This can, in turn, generate | Doc
• Using the TPS3619 with MSP430 Microcontrollers Can Reduce Sys Power Consumption (Rev. A)
The MSP430 series of microcontrollers are ideal in applications where battery life is critical. These microcontollers require only 0.1?A of current in low-power RAM retention mode; In this mode the microcontroller must have power to retain volatile memor | Doc
• Tiny DCDC Converter Reference Design (Rev. A)
This reference design is presented to help application designers and others who are trying to use the MSP430 in a system with an input voltage in the range of 3.6 V to 6 V with the primary design objective to minimize solution size as well as to maintain h | Doc
• AES128 – A C Implementation for Encryption and Decryption (Rev. A)
This application report describes the AES algorithm and the use of a suggested C implementation for AES encryption and decryption with MSP430.Note: This document may be subject to the export control policies of the local government. | Doc
• Interfacing TMS320C5000 DSP to MSP430 Mixed Signal Microcontroller (Rev. A)
The TMS320C5000™ family of digital signal processors (DSPs) features Host Port Interface Controllers (HPI) and Direct Memory Access Controllers (DMAC) for efficient data movement without any CPU involvement. The HPI enables the DSP to interface to host p | Doc
• MSP430 LFXT1 Oscillator Accuracy
This report details the factors that influence achievable accuracy of the low frequency oscillator, specifically for real-time clock (RTC) applications. The intent of this application report is to provide an understanding of MSP430-specific factors influen | Doc
• Interfacing the 3-V MSP430 to 5-V Circuits
The interfacing of the 3-V MSP430x1xx and MSP430x4xx microcontroller families to circuits with a supply of 5 V or higher is shown. Input, output and I/O interfaces are given and explained. Worse-case design equations are provided, where necessary. Some sim | Doc
• Three-Phase Electronic Watt-Hour Meter Design Using MSP430
This application report describes the implementation of a three-phase electronic electricity meter using MSP430 4xx family of microcontrollers. The implemented functions are RMS voltage for each phase, RMS current for each phase, frequency, power, and a re | Doc
• Programming a Flash-Based MSP430 Using the JTAG Interface (Rev. H)
This application report has been superseded by the document shown below. Information previously contained in this application report can be found by clicking on the following links.- MSP430 Programming Via the JTAG Interface User's Guide Download MSP430 P | Doc
• Mixing C and Assembler with the MSP430
This application note describes how C and assembler code can be used together within an MSP430 application. The combination of C and assembler benefits the designer by providing the power of a high-level language as well as the speed, efficiency, and low-l | Doc
• Efficient Multiplication and Division Using MSP430 | Doc
• ESD Diode Current Specification
This document explains the maximum ESD diode current specified for GPIO on MSP microcontrollers. Sometimes signals on specific pins exceed the supply of the MSP MCU. In such a case, the device can handle this overvoltage condition through the ESD diodes, b | Doc
• Implementing An Ultralow-Power Keypad Interface with MSP430
Often in applications with keypads, the condition can occur where a key can be held or stuck down, causing excess current consmption and reducing the battery life of a battery-operated product. This application report shows a solution. The keypad interfa | Doc
• MSP430 Embedded Application Binary Interface
This document is a specification for the ELF-based Embedded Application Binary Interface (EABI) for the MSP430 family of processors from Texas Instruments. The EABI defines the low-level interface between programs, program components, and the execution env | Doc
• Choosing an Ultra Low-Power MCU
This application report describes how to compare ultralow-power MCUs. It discusses the key differences between popular low-power MCUs and how to interpret features and specifications and apply them to application requirements. | Doc
• Interfacing the MSP430 and TLC549/1549 A/D Converters
This application report describes how to interface an MSP430 mixed-signal microcontroller with the TLC549 and TLV1549 3-volt A/D converters. This report is written for the MSP430x11x(1) family, but can be adapted to any MSP430 derivative. | Doc
• Boost DC/DC with Ultra-Low Shutdown Current (Rev. A)
This reference design is presented to help application designers and others who are trying to use the MSP430 in a system that requires a very low input voltage range while also maintaining high efficiency. Battery life is extended as well as a result of th | Doc
• Current Transformer Phase Shift Compensation and Calibration
This application report demonstrates a digital technique to compensate and calibrate the phase shift of a current (or voltage) transformer used in electric power of energy measurement. Traditional analog compensation is replaced by a digital finite impulse | Doc
• MSP430 Family Mixed-Signal Microcontroller Application Reports
MSP430 Metering Application Report | Doc
• Li-Ion Battery Charger solution using the MSP430 | Doc
• MSP430 Software Coding Techniques (Rev. A)
This application report covers software techniques and topics of interest to all MSP430 programmers. The first part of the document discusses the MSP430 standard interrupt-based code flow model, recommended for the vast majority of applications. The next p | Doc
• MSP430 Capacitive Single-Touch Sensor Design Guide
This application report discusses the design of RC-type capacitive single-touch sensors using the MSP430 microcontroller. The MSP430 has some unique features that make it suitable for interfacing with capacitive-touch sensors. The RC-type method does not n | Doc
• MSP430 Flash Memory Characteristics (Rev. A)
Flash memory is a widely used, reliable, and flexible nonvolatile memory to store software code and data in a microcontroller. Failing to handle the flash according to data-sheet specifications may result in unreliable operation of the application. This ap | Doc
• Understanding MSP430 Flash Data Retention
The MSP430 family of microcontrollers, as part of its broad portfolio, offers both read-only memory (ROM)-based and flash-based devices. Understanding the MSP430 flash is extremely important for efficient, robust, and reliable system design. Data retention | Doc
• CRC Implementation with MSP430
Cyclic Redundancy Code (CRC) is commonly used to determine the correctness of a data transmission or storage. This application note presents a solution to compute 16-bit and 32-bit CRCs on the ultra low-power TI MSP430 microcontroller for the bitwise algor | Doc
• Random Number Generation Using the MSP430
Many applications require the generation of random numbers. These random numbers are useful for applications such as communication protocols, cryptography, and device individualization.Generating random numbers often requires the use of expensive dedicated | Doc
Evaluation Kits
MSP-TS430DL48: MSP-TS430DL48 - 48-pin Target Development Board for MSP430F4x MCUs
MSP-TS430PM64: MSP-TS430PM64 - 64-pin Target Development Board for MSP430F1x, MSP430F2x and MSP430F4x MCUs
MSP-FET430U48: 48-pin Target Development Board and MSP-FET Programmer Bundle for MSP430F4x MCUs


Features, Applications

Active Mode: at 1 MHz, 2.2 V Standby Mode: 1.1 µA Off Mode (RAM Retention): 0.1 µA Five Power Saving Modes Wake-Up From Standby Mode in less than µs 16-Bit RISC Architecture, 125-ns Instruction Cycle Time 16-Bit Sigma-Delta A/D Converter With Internal Reference 12-Bit D/A Converter 16-Bit Timer_A With Three Capture/Compare Registers Brownout Detector

No External Programming Voltage Needed Programmable Code Protection by Security Fuse Integrated LCD Driver with Contrast Control for to 56 Segments MSP430x42x0 Family Members Include: MSP430F4250: 16KB+256B Flash Memory 256B RAM MSP430F4260: 24KB+256B Flash Memory 256B RAM MSP430F4270: 32KB+256B Flash Memory 256B RAM For Complete Module Descriptions, See The MSP430x4xx Family User's Guide, Literature Number SLAU056


The Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6µs. The is a microcontroller configuration with a 16-bit timer, a high performance 16-bit sigma-delta A/D converter, 12-bit D/A converter, 32 I/O pins, and a liquid crystal display driver. Typical applications for this device include analog and digital sensor systems, digital motor control, remote controls, thermostats, digital timers, hand-held meters, etc.


This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. These devices have limited built-in ESD protection.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice.


8 Oscillator FLL+ ACLK 32KB Flash 24KB Flash SMCLK 16KB Flash 256B RAM 12-Bit 1 Channel Voltage out


Related products with the same datasheet
Some Part number from the same manufacture Texas Instruments, Inc.
MSP430F4270IDL 16-Bit Ultra-Low-Power MCU, 32kB Flash, 256B RAM, 16-bit sigma Delta A/D, 12-bit D/A, LCD DriverThe Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring
TMS320C6727 Floating-Point Digital Signal ProcessorThe TMS320C672x is the next generation of Texas Instruments’ C67x™ family of high-performance 32-/64-bit floating-point digital signal processors. The TMS320C672x
TRF1222 3.5-GHz Integrated Up-ConverterThe TRF1222 up-converts a UHF IF signal to an RF signal in the 3300-MHz to 3800-MHz range for 3.5-GHz radio applications. The TRF1222 has 18 dB of gain and an output
TRF1221 Dual VCO/PLL Synthesizer With Up-Converter The TRF1121 and TRF1221 are VHF-UHF upconverters with integrated UHF and S-Band frequency synthesizers for radio applications in the 2 GHz to 4 GHz range. The IC performs
TRF1216 3.5-GHz High Dynamic Range Low Noise Down-Converter The TRF1216 is the first of two integrated circuits used in the receiver section of Texas Instruments’ 3.5-GHz radio chipset. The TRF1216 down-converts
TRF1212 Dual VCO/PLL Synthesizer With DownconverterThe TRF1112 / TRF1212 are UHF-VHF down converters with integrated UHF and S-band frequency synthesizers for radio applications in the 2 GHz to 4 GHz range.
TRF1123 2.1-GHz to 2.7-GHz 1-W Power Amplifer The TRF1123 is a highly integrated linear transmitter power amplifier MMIC. The chip has two 16-dB gain steps that provide a total of 32-dB gain control via 1-bit
TRF1122 2.5-GHz Integrated Up-Converter The TRF1122 up-converts a UHF IF signal to an RF signal in the 2100-MHz to 2700-MHz range for 2.5-GHz radio applications. The TRF1122 has 18 dB of gain and an output P-1 dB of +14 dBm,
TRF1121 Dual VCO/PLL Synthesizer With Up-Converter The TRF1121 and TRF1221 are VHF-UHF upconverters with integrated UHF and S-Band frequency synthesizers for radio applications in the 2 GHz to 4 GHz range. The IC performs
TRF1115 2.5-GHz High Dynamic Range Low-Noise Down-Converter The TRF1115 is the first of two ASICs used in the receiver section of Texas Instruments MMDS/MDS/WCS/802.16x chipset. The TRF1115 down-converts the input
TRF1112 Dual VCO/PLL Synthesizer With Downconverter The TRF1112 / TRF1212 are UHF-VHF down converters with integrated UHF and S-band frequency synthesizers for radio applications in the 2 GHz to 4 GHz range.
TRF2432 Dual-Band IQ/IF Transceiver with Dual VCO Synthersizers The TRF2432 is a fully integrated IQ transceiver specifically for use in 802.11 applications. The TRF2432 is designed to perform the IQ conversion
TRF2436 High-Power Dual-Band The TRF2436 is a fully integrated Dual Band Tri Mode Radio Frequency Front End (RFFE) designed specifically for use in 802.11 a/b/g applications. The TRF2436 is designed to perform
OPA277 High Precision Operational Amplifiers The OPA277 series precision op amps replace the industry standard OP-177. They offer improved noise, wider output voltage swing, and are twice as fast with half
TMS320C6418 Fixed-Point Digital Signal ProcessorHigh-Performance Fixed-Point Digital Signal Processor (TMS320C6418) Commercial Temperature Device 1.67-ns Instruction Cycle Time 600-MHz Clock Rate 4800 MIPSExtended
TMS320C6455 Fixed-Point Digital Signal ProcessorThe TMS320C64x+™ DSPs (including the TMS320C6455 device) are the highest-performance fixed-point DSP generation in the TMS320C6000™ DSP platform. The C6455 device
TMS320DM642 Video/Imaging Fixed-Point Digital Signal ProcessorThe TMS320C64x™ DSPs (including the TMS320DM642 device) are the highest-performance fixed-point DSP generation in the TMS320C6000™ DSP platform. The TMS320DM642
THS3001 420-MHz Current-Feedback AmplifierThe THS3001 is a high-speed current-feedback operational amplifier, ideal for communication, imaging, and high-quality video applications. This device offers a very
TPS79928 200mA Low Quiescent Current, Ultra-Low Noise, High PSRR LDOThe TPS799xx family of low-dropout (LDO) low-power linear regulators offer excellent AC performance with very low ground current. High power-supply

CD4504BF3A : Voltage-Level Shifters ti CD4504B, CMOS Hex Voltage-level Shifter For Ttl-to-cmos or CMOS-to-cmos Operation

SN64BCT2244DW : Inverting Buffers and Drivers ti SN64BCT2244, Octal Buffer And Line/mos Driver With 3-State Outputs

SN74ACT7804-40 : CMOS/BiCMOS->AC/ACT Family Strobed Fifo: 512x18

TMX32C6416CZLZA300 : Fixed-point Digital Signal Processors

TMS28F200MB80CDBJL : 262144 BY 8-bit/131072 BY 16-bit Auto-select Boot-block Flash Memories

JM38510/10708SYA : Octal Buffers AND LINE Drivers WITH 3-state Outputs

TPA3100D2IRGZRQ1 : Linear - Amplifier - Audio Integrated Circuit (ics) Class D Tape & Reel (TR) 10 V ~ 26 V; IC AMP AUDIO PWR 21.8W D 48QFN Specifications: Package / Case: 48-VFQFN Exposed Pad ; Type: Class D ; Output Type: 2-Channel (Stereo) ; Voltage - Supply: 10 V ~ 26 V ; Packaging: Tape & Reel (TR) ; Features: Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown ; Max Output Power x Channels @ Load: 21.8W x

SN74LVC125AMDREP : 32-bit BUS Transceiver WITH 3-state Outputs

TPS77815DRG4 : Pmic - Voltage Regulator - Linear (ldo) Integrated Circuit (ics); IC LDO REG 1.5V 750MA 8-SOIC Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

Same catergory

HD6433812 : CISC->H8->Mask ROM. H8/3814 Series Single-chip Microcomputer. Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips.

KS88P4632 : S3C8(KS88) Series. = KS88P4632 Single-chip 8-bit Microcontroller ;; ROM(KB) = 16,32 ;; RAM(bytes) = 528 ;; I/o Pins = 56 ;; Interrupt (Int/Ext) = 11/10 ;; Timer/counters = BT/WDT/8Tx2/16Tx2 ;; Serial Interface = Uart,sio ;; LCD (Seg/Com) = - ;; ADC (BitxCh) = 10x8 ;; PWM(BitxCh) = 14x2,(8x1) ;; Max. OSC.Freq. (MHz) = 12 ;; VDD(V) = 2.7~5.5 ;; Other.

LC865628A : . The LC865632A/28A/24A/20A/16A/12A/08A microcontrollers are 8-bit single chip microcontrollers with the following on-chip functional blocks : - CPU : Operable at a minimum bus cycle time of 0.5µs (microsecond) - On-chip ROM maximum capacity : 32K bytes - On-chip RAM capacity : 640 bytes : 512 bytes - 16-bit timer/counter (or two 8-bit timers) - 16-bit.

LC868116A : . The LC868116A/12A/08A microcontrollers are 8-bit single chip microcontrollers with the following on-chip functional blocks : - CPU : Operable at a minimum bus cycle time of 0.5µs (microseconds) - On-chip ROM maximum capacity : 16K bytes - On-chip RAM capacity : 640 bytes - Dot-matrix liquid crystal display (LCD) automatic display controller / driver.

MB89593B : 8-bit Proprietary Microcontrollers. The MB89590B/BW series is a line of general-purpose, single-chip microcontrollers. In addition to a compact instruction set, these microcontrollers contain a variety of peripheral functions, such as PLL clock control, timers, a serial interface, a PWM timer, the USB hub function, and the USB function. The USB hub function, in particular, supports five.

PIC16C61-04/JW : 8-bit CMOS Microcontrollers. PIC16C66 PIC16C67 Low-power, high-speed CMOS EPROM/ROM technology Fully static design Wide operating voltage range: to 6.0V Commercial, Industrial, and Extended temperature ranges Low-power consumption: 5V, 4 MHz 15 µA typical 3V, 32 kHz 1 µA typical standby current High performance RISC CPU Only 35 single word instructions to learn All single cycle.

PIC16F630 : PICmicro with analog capability. This Powerful (200 Nanosecond Instruction Execution) Yet Easy-to-program (only 35 Single Word Instructions) CMOS Flash-based 8-bit Microcontroller Packs Microchip's Powerful Pic Architecture Into a 14-pin Package.

S3C7281 : S3C7(KS57) Series. = S3C7281 Core-based 4-Bit CMOS Single-chip Microcontroller ;; ROM(KB) = 1 ;; RAM Nibble = - ;; I/o Pins = 14 ;; Interrupt (Int/Ext) = 1/1 ;; Timer/counters = Bt/wt ;; Sio = - ;; LCD (Seg/Com) = 16/4 ;; ADC (BitxCh) = - ;; PWM(BitxCh) = - ;; Max. OSC.Freq. (MHz) = 1 ;; VDD(V) = 1.8~5.5 ;; Other = Low-end LCD GP ;; Package = 32SOP.


W78C54/P/F : CISC. 8-bit MCU w/ 16kx8 ROM, 256x8 RAM, 32 I/os, 3 Timers, 1 Serial Port.

HT36A0 : The HT36A0 is an 8-bit high performance RISC-like microcontroller specifically designed for music applications. It provides an 8-bit MCU and a 16 channel wavetable synthesizer. The program ROM is composed of both program control codes and wavetable voice codes, and can be easily programmed. The HT36A0 has a built-in 8-bit microprocessor which programs.

HT46RU66 : The HT46RU66/HT46CU66 are 8-bit, high performance, RISC architecture microcontroller devices specifically designed for A/D product applications that interface directly to analog signals and which require an LCD Interface. The HT46CU66 mask version device, is fully pin and functionally compatible with its sister HT46RU66 OTP device. The advantages of low power.

HT46R64 : The HT46R64/HT46C64 are 8-bit, high performance, RISC architecture microcontroller devices specifically designed for A/D product applications that interface directly to analog signals and which require LCD Interface. The mask version HT46C64 is fully pin and functionally compatible with the OTP version HT46R64 device. The advantages of low power consumption,.

HT46R32 : The HT46R32 and HT46R34 are 8-bit, high performance, RISC architecture microcontroller devices. With their fully integrated A/D converter they are especially suitable for applications which interface to analog signals, such as those from sensors. The addition of an internal operational amplifier/comparator and PWM modulation functions further adds to the analog.

R8A77850A : 8K(high-speed) + 16K(high-speed) + 128K(medium-speed). 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other.

AT32UC3L : 32-bit MCU The AT32UC3L is the industry\'s lowest power 32-bit MCU with less than 0.48 mW/MHz in active mode executing real-life applications. This device is also the first 32-bit microcontroller to feature a built-in capacitive touch interface, making it suitable for a wide range of embedded applications. The AT32UC3L deploys the Atmel picoPower® technology.

LM3S1F16 : Stellaris Microcontroller Stellaris Microcontroller. Functional Overview ARM Cortex-M3 On-Chip Memory. Serial Communications Peripherals. System Integration. Analog. JTAG and ARM Serial Wire Debug. Packaging and Temperature Target Applications. High-Level Block Diagram Hardware Details. Block Diagram. 49 Overview. 50 System-Level Interface. 50 Integrated Configurable Debug. 50 Trace Port Interface.

0-C     D-L     M-R     S-Z