Details, datasheet, quote on part number: MSP430F436
CategorySemiconductors => Microcontrollers (MCU) => MSP430 ultra-low-power MCUs => MSP430F2x/4x
Part familyMSP430F436 16-Bit Ultra-Low-Power Microcontroller, 24kB Flash, 1024B RAM, 12-Bit ADC, USART, 160 Segment LCD
Description16-Bit Ultra-Low-Power Microcontroller, 24kB Flash, 1024B RAM, 12-Bit ADC, USART, 160 Segment LCD 80-LQFP -40 to 85
CompanyTexas Instruments, Inc.
DatasheetDownload MSP430F436 datasheet
Find where to buy
Timers - 32-bit0
Active Power (uA/MHz)280
Operating Temperature Range(C)-40 to 85
GPIO Pins(#)48
FeaturesLCD,Watchdog,Temp Sensor,Brown Out Reset
Package GroupLQFP,LQFP
Timers - 16-bit2
Min VCC1.8
Max VCC3.6
ADCADC12 - 8ch
Non-volatile Memory (KB)24
Wakeup Time (us)6
Special I/ON/A
Standby Power (LPM3-uA)1.1
Approx. Price (US$)3.70 | 1ku
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
80PNLQFPS-PQFP-G119JEDEC TRAY (10+1)M430F436-80 12121.4.5
Application notes
• MSP430 SMBus
This application report describes a software implementation of the system management bus (SMBus) for the MSP430 microcontroller. It includes all master protocols, an interrupt-driven slave, and master usage examples. SMBus is derived from the I2C and is co | Doc
• MSP430 Isolated FET Interface
This application report describes how to build an isolated FET interface for the MSP430 Flash Emulation Tool (FET). When developing and debugging line-powered MSP430applications such as motor control, electricity energy meters, power monitoring systems etc | Doc
• HDQ Protocol Implementation with MSP430 | Doc
• FSK Modulation and Demodulation With the Microcontroller MSP430
This application report describes a software program for performing V.23 FSK modem transceiver functions using an MSP430 microcontroller. It makes use of novel filter architecture to perform DSP functions on a processor with only shift and add capabilities | Doc
• Designing With MSP430 and Segment LCDs (Rev. A)
Segment liquid crystal displays (LCDs) are needed to provide information to users in a wide variety of applications from smart meters to electronic shelf labels (ESL) to medical equipment. Several MSP430™ microcontroller families include built-in low-pow | Doc
• Driving Large LCDs with LCD Peripheral of the MSP430 (Rev. A)
The 4xx family of MSP430™ devices has two different types of integrated LCD drivers, namely the LCD controller and the LCD_A controller.The 6xx family of MSP430 devices also has two different types of integrated LCD drivers, namely the LCD_B controller a | Doc
• MSP430 32-kHz Crystal Oscillators (Rev. D)
Selection of the right crystal, correct load circuit, and proper board layout are important for a stable crystal oscillator. This application report summarizes crystal oscillator function and explains the parameters to select the correct crystal for ultra- | Doc
• Powering the MSP430 from a High Voltage Input using the TPS62122 (Rev. C) | Doc
• Generation and Recognition of DTMF Signals With the Microcontroller MSP430
The first part of the Application Report describes the generation of DTMF signals using the Microcontroller MSP430. Following an explanation of the most important specifications which are involved, the theoretical and mathematical processes will be discuss | Doc
• General Oversampling of MSP ADCs for Higher Resolution (Rev. A)
Multiple MSP ultra-low-power microcontrollers offer analog-to-digital converters (ADCs) to convert physical quantities into digital numbers, a function that is widely used across numerous applications. There are times, however, when a customer design deman | Doc
• Advanced Debugging Using the Enhanced Emulation Module (EEM) With CCS v6 (Rev. F) | Doc
• Simple 1.5 V Boost Converter for MSP430
A simple, efficient, low-cost, boost converter to take 1.5 V from a single type-AA alkaline battery to the operating voltage required by the MSP430 family of ultralow-power microcontrollers is described. Expected battery life is up to 1000 hours. | Doc
• Efficient MSP430 Code Synthesis for an FIR Filter
Digital filtering can be easily accomplished on the MSP430 using efficient multiplication. The tool accompanying this document automatically converts FIR filter coefficients to MSP430 assembly code that can be used in any application. Horner’s method and | Doc
• Wave Digital Filtering Using the MSP430
Digital filtering is an integral part of many digital signal processing algorithms. Digital filters are characterized as either recursive [infinite impulse response (IIR)] or non-recursive [finite impulse response (FIR)] filters. IIR filters require a smal | Doc
• Implementing a Direct Thermocouple Interface With MSP430x4xx and ADS1240 (Rev. A)
This application report describes and shows how to implement a direct thermocouple interface, without using the signal conditioning circuitry normally required for thermocouples. The thermocouple interfaces directly to the Burr Brown ADS1240, 24-bit ADC fr | Doc
• MSP Code Protection Features
MSP microcontrollers (MCUs) offer a number of features to help control code accessibility in the device, to add different layers of code access management and protection strategies. These include features that can lock or password protect the JTAG/SBW acce | Doc
• Economic Voltage Measurement With the MSP430 Family
This application report describes voltage and current measurement methods using the MSP430 universal timer/port module. The report explains the two measurement methods (charge and discharge) and shows how to measure voltage and current. The equations for t | Doc
• 1.8V – 5.5V Input, High-Efficiency DCDC Converter Reference Design for MSP430 (Rev. B)
This reference design is presented to help application designers and others who are trying to use the MSP430 in a system with an input voltage in the range of 1.8 V to 5.5 V, and who must increase the application run time by making use of the complete batt | Doc
• Design Considerations When Using the MSP430 Graphics Library
LCDs are a growing commodity in todays market with products as diverse as children's toys to medical devices. Modern LCDs, along with the graphics displayed on them, are growing in complexity. A graphics library can simplify and accelerate development whil | Doc
• Digital Fan Control With Tachometer Using MSP430
Digital Fan Control with Tachometer using MSP430 Application Report | Doc
• Use of Two MSP430s to Enhance Segment Lines for Larger LCDs (Rev. A)
This application report explains a technique that uses two MSP430™ microcontrollers to expand the maximum number of LCD segments that can be driven with a single controller. Additional benefits of the technique include increases in available memory, data | Doc
• Spread-Spectrum Clock Source Using an MSP430
While spread-spectrum clocking has long since been used in processor and memory clock trees, there are many other clocked systems, such as power supplies or switch-mode amplifiers, that continue to use a single-frequency clock. This can, in turn, generate | Doc
• Using the TPS3619 with MSP430 Microcontrollers Can Reduce Sys Power Consumption (Rev. A)
The MSP430 series of microcontrollers are ideal in applications where battery life is critical. These microcontollers require only 0.1?A of current in low-power RAM retention mode; In this mode the microcontroller must have power to retain volatile memor | Doc
• Tiny DCDC Converter Reference Design (Rev. A)
This reference design is presented to help application designers and others who are trying to use the MSP430 in a system with an input voltage in the range of 3.6 V to 6 V with the primary design objective to minimize solution size as well as to maintain h | Doc
• AES128 – A C Implementation for Encryption and Decryption (Rev. A)
This application report describes the AES algorithm and the use of a suggested C implementation for AES encryption and decryption with MSP430.Note: This document may be subject to the export control policies of the local government. | Doc
• Interfacing TMS320C5000 DSP to MSP430 Mixed Signal Microcontroller (Rev. A)
The TMS320C5000™ family of digital signal processors (DSPs) features Host Port Interface Controllers (HPI) and Direct Memory Access Controllers (DMAC) for efficient data movement without any CPU involvement. The HPI enables the DSP to interface to host p | Doc
• MSP430 LFXT1 Oscillator Accuracy
This report details the factors that influence achievable accuracy of the low frequency oscillator, specifically for real-time clock (RTC) applications. The intent of this application report is to provide an understanding of MSP430-specific factors influen | Doc
• Interfacing the 3-V MSP430 to 5-V Circuits
The interfacing of the 3-V MSP430x1xx and MSP430x4xx microcontroller families to circuits with a supply of 5 V or higher is shown. Input, output and I/O interfaces are given and explained. Worse-case design equations are provided, where necessary. Some sim | Doc
• Three-Phase Electronic Watt-Hour Meter Design Using MSP430
This application report describes the implementation of a three-phase electronic electricity meter using MSP430 4xx family of microcontrollers. The implemented functions are RMS voltage for each phase, RMS current for each phase, frequency, power, and a re | Doc
• Programming a Flash-Based MSP430 Using the JTAG Interface (Rev. H)
This application report has been superseded by the document shown below. Information previously contained in this application report can be found by clicking on the following links.- MSP430 Programming Via the JTAG Interface User's Guide Download MSP430 P | Doc
• Mixing C and Assembler with the MSP430
This application note describes how C and assembler code can be used together within an MSP430 application. The combination of C and assembler benefits the designer by providing the power of a high-level language as well as the speed, efficiency, and low-l | Doc
• Efficient Multiplication and Division Using MSP430 | Doc
• ESD Diode Current Specification
This document explains the maximum ESD diode current specified for GPIO on MSP microcontrollers. Sometimes signals on specific pins exceed the supply of the MSP MCU. In such a case, the device can handle this overvoltage condition through the ESD diodes, b | Doc
• Implementing An Ultralow-Power Keypad Interface with MSP430
Often in applications with keypads, the condition can occur where a key can be held or stuck down, causing excess current consmption and reducing the battery life of a battery-operated product. This application report shows a solution. The keypad interfa | Doc
• MSP430 Embedded Application Binary Interface
This document is a specification for the ELF-based Embedded Application Binary Interface (EABI) for the MSP430 family of processors from Texas Instruments. The EABI defines the low-level interface between programs, program components, and the execution env | Doc
• Choosing an Ultra Low-Power MCU
This application report describes how to compare ultralow-power MCUs. It discusses the key differences between popular low-power MCUs and how to interpret features and specifications and apply them to application requirements. | Doc
• Interfacing the MSP430 and TLC549/1549 A/D Converters
This application report describes how to interface an MSP430 mixed-signal microcontroller with the TLC549 and TLV1549 3-volt A/D converters. This report is written for the MSP430x11x(1) family, but can be adapted to any MSP430 derivative. | Doc
• Boost DC/DC with Ultra-Low Shutdown Current (Rev. A)
This reference design is presented to help application designers and others who are trying to use the MSP430 in a system that requires a very low input voltage range while also maintaining high efficiency. Battery life is extended as well as a result of th | Doc
• Current Transformer Phase Shift Compensation and Calibration
This application report demonstrates a digital technique to compensate and calibrate the phase shift of a current (or voltage) transformer used in electric power of energy measurement. Traditional analog compensation is replaced by a digital finite impulse | Doc
• MSP430 Family Mixed-Signal Microcontroller Application Reports
MSP430 Metering Application Report | Doc
• Li-Ion Battery Charger solution using the MSP430 | Doc
• MSP430 Software Coding Techniques (Rev. A)
This application report covers software techniques and topics of interest to all MSP430 programmers. The first part of the document discusses the MSP430 standard interrupt-based code flow model, recommended for the vast majority of applications. The next p | Doc
• MSP430 Capacitive Single-Touch Sensor Design Guide
This application report discusses the design of RC-type capacitive single-touch sensors using the MSP430 microcontroller. The MSP430 has some unique features that make it suitable for interfacing with capacitive-touch sensors. The RC-type method does not n | Doc
• MSP430 Flash Memory Characteristics (Rev. A)
Flash memory is a widely used, reliable, and flexible nonvolatile memory to store software code and data in a microcontroller. Failing to handle the flash according to data-sheet specifications may result in unreliable operation of the application. This ap | Doc
• Understanding MSP430 Flash Data Retention
The MSP430 family of microcontrollers, as part of its broad portfolio, offers both read-only memory (ROM)-based and flash-based devices. Understanding the MSP430 flash is extremely important for efficient, robust, and reliable system design. Data retention | Doc
• CRC Implementation with MSP430
Cyclic Redundancy Code (CRC) is commonly used to determine the correctness of a data transmission or storage. This application note presents a solution to compute 16-bit and 32-bit CRCs on the ultra low-power TI MSP430 microcontroller for the bitwise algor | Doc
• Random Number Generation Using the MSP430
Many applications require the generation of random numbers. These random numbers are useful for applications such as communication protocols, cryptography, and device individualization.Generating random numbers often requires the use of expensive dedicated | Doc
Evaluation Kits
MSP-FET430U80: 80-pin Target Development Board and MSP-FET Programmer Bundle for MSP430F2x and MSP430F4x MCUs
MSP-TS430PN80: MSP-TS430PN80 - 80-pin Target Development Board for MSP430F2x and MSP430F4x MCUs
MSP-FET430P440: MSP430F43X/44X Flash Emulation Tool
MSP-TS430PZ100: MSP-TS430PZ100 - 100-pin Target Development Board for MSP430F4x MCUs
MSP-FET430U100: 100-pin Target Development Board and MSP-FET Programmer Bundle for MSP430F4x MCUs


Features, Applications

No External Programming Voltage Needed Programmable Code Protection by Security Fuse Integrated LCD Driver for to 160 Segments Family Members Include: MSP430F435: 16KB+256B Flash Memory, 512B RAM MSP430F436: 24KB+256B Flash Memory, 1KB RAM MSP430F437: 32KB+256B Flash Memory, 1KB RAM MSP430F447: 32KB+256B Flash Memory, 1KB RAM MSP430F448: 48KB+256B Flash Memory, 2KB RAM MSP430F449: 60KB+256B Flash Memory, 2KB RAM For Complete Module Descriptions, See The MSP430x4xx Family User's Guide, Literature Number SLAU056

Active Mode: at 1 MHz, V Standby Mode: A Off Mode (RAM Retention): 0.1 A Five Power Saving Modes Wake-Up From Standby Mode s 16-Bit RISC Architecture, 125-ns Instruction Cycle Time 12-Bit A/D Converter With Internal Reference, Sample-and-Hold and Autoscan Feature 16-Bit Timer_B With Three or Seven Capture/Compare-With-Shadow Registers 16-Bit Timer_A With Three Capture/Compare Registers On-Chip Comparator Serial Communication Interface (USART), Select Asynchronous UART or Synchronous SPI by Software: Two USARTs USART1) MSP430x44x Devices One USART (USART0) MSP430x43x Devices Brownout Detector Supply Voltage Supervisor/Monitor With Programmable Level Detection


The Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that attribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6s. The MSP430x43x and the MSP430x44x series are microcontroller configurations with two built-in 16-bit timers, a fast 12-bit A/D converter, one or two universal serial synchronous/asynchronous communication interfaces (USART), 48 I/O pins, and a liquid crystal driver (LCD) with to 160 segments. Typical applications include sensor systems that capture analog signals, convert them to digital values, and process and transmit the data to a host system, or process this data and displays on a LCD panel. The timers make the configurations ideal for industrial control applications such as ripple counters, digital motor control, EE-meters, hand-held meters, etc. The hardware multiplier enhances the performance and offers a broad code and hardware-compatible family solution.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.




Some Part number from the same manufacture Texas Instruments, Inc.
MSP430F436IPN ti MSP430F436, 16-Bit Ultra-low-power Microcontroller, 24kB Flash, 1024B RAM, 12-Bit ADC, Usart, 160 Segment LCD
MSP430F437 Ultra-low Power Microcontroller
MSP430F437IPN ti MSP430F437, 16-Bit Ultra-low-power Microcontroller, 32kB Flash, 1024B RAM, 12-Bit ADC, Usart, 160 Segment LCD
MSP430F447 Ultra-low Power Microcontroller
MSP430F447IPZ ti MSP430F447, 16-Bit Ultra-low-power MCU, 32kB Flash, 1024B RAM, 12-Bit ADC, 2 Usarts, HW Multiplier, 160 Seg LCD
MSP430F448 Ultra-low Power Microcontroller
MSP430F448IPZ ti MSP430F448, 16-Bit Ultra-low-power MCU, 48kB Flash, 2048B RAM, 12-Bit ADC, 2 Usarts, HW Multiplier, 160 Seg LCD
MSP430F449 Ultra-low Power Microcontroller
MSP430F449IPZ ti MSP430F449, 16-Bit Ultra-low-power MCU, 60kB Flash, 2048B RAM, 12-Bit ADC, 2 Usarts HW Multiplier, 160 Seg LCD
MSP430Family Ultra-low-power Microcontrollers
MSP430FE423 Ultra-low Power Microcontroller
MSP430FE427IPM ti MSP430FE427, 16-bit Ultra-low-power Microcontroller For Energy Meters, 32kB Flash, 1024B RAM
MSP430FG437 Ultra-low Power Microcontroller
MSP430FG437 16-Bit Ultra-low-power MCU, 32KB Flash, 1KB RAM, 12-Bit ADC, Dual DAC, Dma, 3 Opamp, 128 Seg Lcd<<<>>>the MSP430FG43x Series Are Microcontroller Configurations With Two 16-bit Timers, a High Performance
MSP430FG438 Ultra-low Power Microcontroller
MSP430FG438 16-Bit Ultra-low-power MCU, 48KB Flash, 2KB RAM, 12-Bit ADC, Dual DAC, Dma, 3 Opamp, 128 Seg Lcd<<<>>>the MSP430FG43x Series Are Microcontroller Configurations With Two 16-bit Timers, a High Performance
MSP430FG439 Ultra-low Power Microcontroller
MSP430FG439 16-Bit Ultra-low-power MCU, 60KB Flash, 2KB RAM, 12-Bit ADC, Dual DAC, Dma, 3 Opamp, 128 Seg Lcd<<<>>>the MSP430FG43x Series Are Microcontroller Configurations With Two 16-bit Timers, a High Performance
MSP430FW423 Ultra-low Power Microcontroller

74ACT11643 : Bus Oriented Circuits Octal Bus Transceiver With 3-state Outputs

ADS1256IDBR : 24 Bit, 30kSPS Very Low Noise Delta-sigma ADC With Multiplexer

BQ4011YMA-120N : 32kx8 Nonvolatile SRAM

CD4094BF3A : ti CD4094B, CMOS 8-Stage Shift-and-store Bus Register

PT5026LT : Plug-in Power Solutions->Non-Isolated->Single Nega ti PT5026, (-)5.2Vout 1A (+)5V-Input Positive to Negative Isr

SN74CBT162292DGG : 12-bit 1-of-2 Fet Multiplexer/demultiplexer With Internal Pulldown Resistors

SNJ54LS373J : D-Type (3-State) Latches ti SN54LS373, Octal D-type Transparent Latches With 3-state Outputs

SN74AHC574NE4 : HEX Inverters

AM26C31IDBRE4 : Quadruple Differential LINE Driver

F28M35E50C1RFPT : Embedded - Microcontroller Integrated Circuit (ics) - Tray 1.8V, 3.3V; IC MCU 32B 1024KB FLASH 144HTQFP Specifications: Program Memory Size: 1MB (1M x 8) ; RAM Size: 72K x 8 ; Number of I /O: 64 ; Package / Case: 144-TQFP Exposed Pad ; Speed: 60MHz ; Oscillator Type: - ; Packaging: Tray ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: ARM Cortex-M3 ; Data Converters: A/D 20x12b ; Core

Same catergory

80C51X2 : 80c51 8-bit Microcontroller Family 4k/8k/16k/32k ROM/otp 128b/256b RAM Low Voltage 2.7 to 5.5 v, Low Power, High Speed 30/33 MHZ.

AT83C5132 : USB Controllers. Usb C51-based Microcontroller With 64K Bytes ROM, 2304 Bytes RAM, 4 Usb Endpoints, Spi, Uart, Ide, Twi, Multimediacard, Dataflash, I2S, 10-bit ADC..

CXP83200A : CMOS 8-bit Single Chip Microcomputer Piggyback/evaluator Type. The is a CMOS 8-bit single chip microcomputer of piggyback/evaluator combined type, which is developed for evaluating the function of the CXP83120A/83124A and CXP83232/83240. Wide-range instruction system (213 instructions) to LQFP supported QFP supported cover various types of data 16-bit operation/multiplication and division/Boolean bit operation.

E0C62M2 : S1C62 Family.

HE83138 : with LCD Driver. ROM Type = Mask ;; Application = LCD Driver MCU ;; ROM = 48KB ;; RAM = 1KB ;; I/o = 16 ;; LCD = 512.

KMC912DG128ACPV : M68HC12 Family. MC68HC912DT128A, MC68HC912DG128A Technical Data. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,.

KS57C01502 : The Ks57c01502/c01504 Single-chip CMOS Microcontroller Has Been Designed For High-performance Using Samsungs Newest 4-bit Cpu Core, Sam47 ( Samsung Arr.

MB89567A : Proprietary F2MC-8L Family. LCD Controller/driver Products. The MB89560A series has been developed as a general-purpose version of the F2MC*1-8L family consisting of proprietary 8-bit, single-chip microcontrollers. In addition to a compact instruction set, the microcontroller contains a variety of peripheral functions such I2C interface*2, timers, ch 8-bit PWM timers, 8/16-bit timer, 21-bit timebase timer, 8-bit.

MB90V590G : 16-bit Proprietary Microcontroller. The MB90590/590G series with two FULL-CAN*1 interfaces and FLASH ROM is especially designed for automotive and industrial applications. Its main are two on board CAN Interfaces, which conform to V2.0 Part A and Part B, while supporting a very flexible message buffer scheme and so offering more functions than a normal full CAN approach. The instruction.

SAB-80C515A-N18-T3 : 8-bit Microcontroller. Microcontroller with factory mask-programmable ROM Microcontroller for external ROM q SAB to 18 MHz operation frequency 8 ROM (SAB 83C515A-5 only, ROM-Protection available) 8 on-chip RAM q Additional on-chip RAM (XRAM) q Superset of SAB 80C51 architecture: 1 s instruction cycle time at 12 MHz 666 ns instruction cycle time at 18 MHz 256 directly.

TMP47C457F : CISC->TMP. CMOS 4-bit Microcontroller.

TMP47C647F : CISC->TMP. CMOS 4-bit Microcontroller.

TMP87CP39 : CISC->TMP. CMOS 8-bit Microcontroller.

PIC16F677 : The Low Pin-count (20) PIC Flash microcontroller products offer all of the advantages of the well recognized mid-range x14 architecture with standardized including a wide operating voltage of 2.0-5.5 volts, on-board EEPROM Data Memory, and nanoWatt Technology. Standard analog peripherals include up to 12 channels of 10-bit A/D, an analog comparator.

ST10F272M : Microcontrollers For Automotive 16-bit MCU with 256 Kbyte Flash memory and 20 Kbyte RAM.

PC9S08SG32MTJ : 8-Bit Microcontroller Family Freescale Semiconductors 8-bit SG Family of microcontrollers (MCUs) is a mid to low-end offering designed for LIN slave, general market and space-constrained applications. Based on the S08 core, the SG offers up to 40 MHz of CPU performance using Freescales 0.25 flash to push the boundaries of 8-bit into the range of 16-bit.

LM3S1H11 : Stellaris Microcontroller Stellaris Microcontroller. Functional Overview ARM Cortex-M3 On-Chip Memory. External Peripheral Interface. Serial Communications Peripherals. System Integration. Analog. JTAG and ARM Serial Wire Debug. Packaging and Temperature Target Applications. High-Level Block Diagram Hardware Details. Block Diagram. 54 Overview. 55 System-Level Interface. 55 Integrated Configurable.

0-C     D-L     M-R     S-Z