|
Details, datasheet, quote on part number:OPA2356AIDGKR
| |
Datasheet text preview:
OPA
356
OPA
235
OPA356 OPA2356
6
OPA
235
6
SBOS212A NOVEMBER, 2001
200MHz, CMOS OPERATIONAL AMPLIFIER
FEATURES
q UNITY-GAIN BANDWIDTH: 450MHz q WIDE BANDWIDTH: 200MHz GBW q HIGH SLEW RATE: 360V/µs q LOW NOISE: 5.8nV/Hz q EXCELLENT VIDEO PERFORMANCE: DIFF GAIN: 0.02%, DIFF PHASE: 0.05° 0.1dB GAIN FLATNESS: 75MHz q INPUT RANGE INCLUDES GROUND q RAIL-TO-RAIL OUTPUT (within 100mV) q LOW INPUT BIAS CURRENT: 3pA q THERMAL SHUTDOWN q SINGLE-SUPPLY OPERATING RANGE: 2.5V to 5.5V q MicroSIZE PACKAGES
DESCRIPTION
The OPAx356 series high-speed, voltage-feedback CMOS operational amplifiers are designed for video and other applications requiring wide bandwidth. The OPAx356 is unity gain stable and can drive large output currents. Differential gain is 0.02% and differential phase is 0.05°. Quiescent current is only 8.3mA per channel. OPAx356 is optimized for operation on single or dual supplies as low as 2.5V (±1.25V) and up to 5.5V (±2.75V). Common-mode input range for the OPAx356 extends 100mV below ground and up to 1.5V from V+. The output swing is within 100mV of the rails, supporting wide dynamic range. The OPAx356 series is available in single (SOT23-5 and SO-8), and dual (MSOP-8 and SO-8) versions. Multichannel versions feature completely independent circuitry for lowest crosstalk and freedom from interaction. All are specified over the extended 40°C to +125°C range.
APPLICATIONS
q VIDEO PROCESSING q ULTRASOUND q OPTICAL NETWORKING, TUNABLE LASERS q PHOTODIODE TRANSIMPEDANCE AMPS q ACTIVE FILTERS q HIGH-SPEED INTEGRATORS q ANALOG-TO-DIGITAL (A/D) CONVERTER INPUT BUFFERS q DIGITAL-TO-ANALOG (D/A) CONVERTER OUTPUT AMPLIFIERS q BARCODE SCANNERS q COMMUNICATIONS
OPAx356 RELATED PRODUCTS
FEATURES 200MHz, Rail-to-Rail Output, CMOS, Shutdown 38MHz, Rail-to-Rail Input/Output, CMOS 75MHz, Rail-to-Rail Output 150MHz, Rail-to-Rail Output Differential Input/Output, 3.3V Supply PRODUCT OPAx355 OPAx350 OPAx631 OPAx634 THS412x
V+ VIN OPA356 +VIN Out
V
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Copyright © 2001, Texas Instruments Incorporated
www.ti.com
ABSOLUTE MAXIMUM RATINGS(1)
Supply Voltage, V+ to V .......... 7.5V Signal Input Terminals, Voltage(2) ........... (V) 0.5V to (V+) + 0.5V C u r r e n t ( 2 ) ..... 10mA Output Short-Circuit(3) ..... Continuous Operating Temperature ........ 55°C to +150°C Storage Temperature ...... 65°C to +150°C Junction Temperature ........... +160°C Lead Temperature (soldering, 10s) ..... +300°C NOTE: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. (2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5V beyond the supply rails should be current limited to 10mA or less. (3) Short-circuit to ground one amplifier per package.
ELECTROSTATIC DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE /ORDERING INFORMATION
PACKAGE DESIGNATOR(1) DBV SPECIFIED TEMPERATURE RANGE 40°C to +125°C PACKAGE MARKING OAAI ORDERING NUMBER(2) OPA356AIDBVT OPA356AIDBVR OPA356AID OPA356AIDR OPA2356AIDGKT OPA2356AIDGKR OPA2356AID OPA2356AIDR TRANSPORT MEDIA, QUANTITY Tape and Reel, 250 Tape and Reel, 3000 Rails, 100 Tape and Reel, 2500 Tape and Reel, 250 Tape and Reel, 2500 Rails, 100 Tape and Reel, 2500
PRODUCT OPA356AIDBV
PACKAGE-LEAD SOT23-5
"
OPA356AID
"
SO-8
"
D
"
40°C to +125°C
"
OPA356A
"
OPA2356AIDGK
"
MSOP-8
"
DGK
"
40°C to +125°C
"
AYI
"
OPA2356AID
"
S O-8
"
D
"
40°C to +125°C
"
OPA2356A
"
"
"
"
"
NOTES: (1) For the most current specifications and package information, refer to our web site at www.ti.com. (2) Models labeled with "T" indicate smaller quantity tape and reel, "R" indicates large quantity tape and reel and "D" indicates rails of specified quantity.
PIN CONFIGURATIONS
Top View
OPA356
OPA2356
OPA356
NC(1) 1 2 3 4 SO 8 7 6 5 NC(1) V+ Out NC(1)
Out A In A +In A V 1 2 A 3 B 4 MSOP, SO 8 7 6 5 V+ Out B In B +In B
Out 1 V 2
5
V+
In +In
+In 3 SOT23
4
In
V
NOTE: (1) NC means no internal connection.
2
OPA356, 2356
SBOS212A
ELECTRICAL CHARACTERISTICS: VS = +2.7V to +5.5V Single Supply
Boldface limits apply over the specified temperature range, TA = 40°C to +125°C.
At TA = +25°C, RF = 604, RL = 150, Connected to VS/2, unless otherwise noted. OPA356AIDBV, AID, OPA2356AIDGK, AID PARAMETER OFFSET VOLTAGE Input Offset Voltage vs Temperature vs Power Supply INPUT BIAS CURRENT Input Bias Current Input Offset Current NOISE Input Noise Voltage Density Current Noise Density INPUT VOLTAGE RANGE Common-Mode Voltage Range Common-Mode Rejection Ratio INPUT IMPEDANCE Differential Common-Mode OPEN-LOOP GAIN OPA356 OPA2356 FREQUENCY RESPONSE Small-Signal Bandwidth f3dB f3dB f3dB f3dB GBW f0.1dB SR VS = +5V, 0.3V 84dB VS = +5V, RL = 1k IO = ±100mA IO IO IO VS = +5V VS = +3V f < 100kHz VS IQ VS = +5V, IO = 0 Specified Temperature Range 2.7 2.5 to 5.5 8 .3 ±60 ±100 ±80 +250/ 200 0.02 5.5 11 14 84 80 80 VOS dVOS/dT PSRR IB IOS en in VCM CMRR f = 1MHz f = 1MHz (V) 0.1 66 66 CONDITION VS = +5V Specified Temperature Range Specified Temperature Range VS = +2.7V to +5.5V, VCM = VS/2 0.15V MIN TYP ±2 MAX ±9 UNITS mV mV µV/°C µV/V pA pA nV/Hz fA/Hz (V+) 1.5 80 V dB dB || pF || pF dB dB dB MHz MHz MHz MHz MHz MHz V/µs ns ns ns ns ns dBc dBc % degrees dB 0 .3 1 V V V mA mA mA mA V V mA mA
±7 ±80
3 ±1 5.8 50
±15
±350 ±50 ±50
VS = +5.5V, 0.1V < VCM < +4.0V Specified Temperature Range
1013 || 1.5 1013 || 1.5 92
Gain-Bandwidth Product Bandwidth for 0.1dB Gain Flatness Slew Rate Rise-and-Fall Time Settling Time, 0.1% 0.01% Overload Recovery Time Harmonic Distortion 2nd Harmonic 3rd Harmonic Differential Gain Error Differential Phase Error Channel-to-Channel Crosstalk OUTPUT Voltage Output Swing from Rail Voltage Output Swing from Rail Voltage Output Swing from Rail Ouput Current, Continuous(1) Maximum Output Current, Peak(1) Maximum Output Current, Peak(1) Short Circuit Current Closed-Loop Output Impedance POWER SUPPLY Specified Voltage Range Operating Voltage Range Quiescent Current (per amplifier)
450 100 170 200 200 75 300/ 3 6 0 2.4 8 30 120 8 81 93 0.02 0.05 90 0.2 0.1 0.8
OPA2356
OPA356, 2356
SBOS212A
3
|
|
