|
Details, datasheet, quote on part number:OPA830ID
| |
| Part: | OPA830ID |
| Category: | Analog & Mixed-Signal Processing => Amplifiers => Operational Amplifiers => General Purpose |
| Description: | Low-Power, Singl-Supply Operational Amplifiers
The OPA830 is a low-power, single-supply, wideband, voltage-feedback amplifier designed to operate on a single +3V or +5V supply. Operation on ±5V or +10V supplies is also supported. The input range extends below the negative supply and to within 1.7V of the positive supply. Using complementary common-emitter outputs provides an output swing to within 25mV of either supply while driving 150. High output drive current (±80mA) and low differential gain and phase errors also make them ideal for single-supply consumer video products.
Low distortion operation is ensured by the high gain bandwidth product (110MHz) and slew rate (550V/µs), making the OPA830 an ideal input buffer stage to 3V and 5V CMOS ADCs. Unlike other low-power, single-supply amplifiers, distortion performance improves as the signal swing is decreased. A low 9.2nV/Hz input voltage noise supports wide dynamic range operation.
The OPA830 is available in an industry-standard SO-8 package. The OPA830 is also available in an ultra-small SOT23-5 package. For fixed-gain line driver applications, consider the OPA832.
HIGH BANDWIDTH:
250MHz (G = +1)
110MHz (G = +2)
LOW SUPPLY CURRENT: 3.9mA (VS = +5V)
FLEXIBLE SUPPLY RANGE:
±1.4V to ±5.5V Dual Supply
+2.8V to +11V Single Supply
INPUT RANGE INCLUDES GROUND ON SINGLE SUPPLY
4.88V OUTPUT SWING ON +5V SUPPLY
HIGH SLEW RATE: 550V/ns
LOW INPUT VOLTAGE NOISE: 9.2nV/Hz
Pb-FREE SOT23 PACKAGE
APPLICATIONS
SINGLE-SUPPLY ANALOG-TO-DIGITAL CONVERTER (ADC) INPUT BUFFERS
SINGLE-SUPPLY VIDEO LINE DRIVERS
CCD IMAGING CHANNELS
LOW-POWER ULTRASOUND
PLL INTEGRATORS
PORTABLE CONSUMER ELECTRONICS |
| Company: | Texas Instruments, Inc. |
| Datasheet: | Download OPA830ID datasheet File size : 471 kB |
| Request For quote: | Find where to buy OPA830ID
|
|
