|
|
Part: SN54ACT32
Category:
Logic
-> Gates
Description: Quadruple 2-input Positive-OR GATEs
Company: Texas Instruments, Inc.
Datasheet: Download SN54ACT32 datasheet File size : 214 kB
Request For quote: Find where to buy SN54ACT32
Datasheet text preview:
SN54ACT32, SN74ACT32 QUADRUPLE 2-INPUT POSITIVE-OR GATES
SCAS530A AUGUST 1995 REVISED MAY 1996
D D D
Inputs Are TTL-Voltage Compatible EPIC TM (Enhanced-Performance Implanted CMOS) 1-µm Process Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB), and Thin Shrink Small-Outline (PW) Packages, Ceramic Chip Carriers (FK) and Flatpacks (W), and Standard Plastic (N) and Ceramic (J) DIPS
SN54ACT32 . . . J OR W PACKAGE SN74ACT32 . . . D, DB, N, OR PW PACKAGE (TOP VIEW)
description
The 'ACT32 are quadruple 2-input positive-OR gates. The devices perform the Boolean function Y = A + B or Y = A · B in positive logic. The SN54ACT32 is characterized for operation over the full military temperature range of 55°C to 125°C. The SN74ACT32 is characterized for operation from 40°C to 85°C.
FUNCTION TABLE (EACH GATE) INPUTS A H X L B X H L OUTPUT Y H H L
1A 1B 1Y 2A 2B 2Y GND
1 2 3 4 5 6 7
14 13 12 11 10 9 8
VCC 4B 4A 4Y 3B 3A 3Y
SN54ACT32 . . . FK PACKAGE (TOP VIEW)
1B 1A NC VCC 1Y NC 2A NC 2B
4 5 6 7 8
3 2 1 20 19 18 17 16 15 14 9 10 11 12 13
4B 4A NC 4Y NC 3B
Y
NC No internal connection
logic symbol
1A 1B 2A 2B 3A 3B 4A 4B 1 2 4 5 9 10 12 13 11 4Y 8 3Y 6 2Y 1 3 1Y
logic diagram (positive logic)
A B
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the D, DB, J, N, PW, and W packages.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. EPIC is a trademark of Texas Instruments Incorporated.
UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303
Copyright © 1996, Texas Instruments Incorporated
· DALLAS, TEXAS 75265
2Y GND NC 3Y 3A
1
SN54ACT32, SN74ACT32 QUADRUPLE 2-INPUT POSITIVE-OR GATES
SCAS530A AUGUST 1995 REVISED MAY 1996
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to VCC + 0.5 V Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to VCC + 0.5 V Input clamp current, IIK (VI VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Output clamp current, IOK (VO VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±200 mA Maximum power dissipation at TA = 55°C (in still air) (see Note 2): D package . . . . . . . . . . . . . . . . . . . 1.25 W DB package . . . . . . . . . . . . . . . . . . . 0.5 W N package . . . . . . . . . . . . . . . . . . . . 1.1 W PW package . . . . . . . . . . . . . . . . . . . 0.5 W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The maximum package power dissipation is calculated using a junction temperature of 150°C and a board trace length of 750 mils, except for the N package, which has a trace length of zero.
recommended operating conditions (see Note 3)
SN54ACT32 MIN VCC VIH VIL VI VO IOH IOL t/v Supply voltage High-level input voltage Low-level input voltage Input voltage Output voltage High-level output current Low-level output current Input transition rise or fall rate 0 55 0 0 4.5 2 0.8 VCC VCC 24 24 8 125 0 40 0 0 MAX 5.5 SN74ACT32 MIN 4.5 2 0.8 VCC VCC 24 24 8 85 MAX 5.5 UNIT V V V V V mA mA ns/V °C
TA Operating free-air temperature NOTE 3: Unused inputs must be held high or low to prevent them from floating.
PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice.
2
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
SN54ACT32, SN74ACT32 QUADRUPLE 2-INPUT POSITIVE-OR GATES
SCAS530A AUGUST 1995 REVISED MAY 1996
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS CONDITIONS IOH = 50 µA 50 µA VOH IOH = 24 mA 24 mA IOH = 50 mA IOH = 75 mA IOL = 50 µA 50 µA VOL IOL = 24 mA 24 mA IOL = 50 mA IOL = 75 mA II ICC VI = VCC or GND VI = VCC or GND, IO = 0 VCC 4.5 V 5.5 V 4.5 V 5.5 V 5.5 V 5.5 V 4.5 V 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 0.6 ±0.1 2 ±1 40 1.6 0.001 0.001 0.1 0.1 0.36 0.36 0.1 0.1 0.5 0.5 1.65 1.65 ±1 20 1.5 µA µA mA pF MIN 4.4 5.4 3.86 4.86 TA = 25°C TYP MAX SN54ACT32 MIN 4.4 5.4 3.7 4.7 3.86 3.85 0.1 0.1 0.44 0.44 V MAX SN74ACT32 MIN 4.4 5.4 3.76 4.76 V MAX UNIT
nICC
One input at 3.4 V, Other inputs at VCC or GND
Ci VI = VCC or GND 5V 2.6 Not more than one output should be tested at a time, and the duration of the test should not exceed 2 ms. This is the increase in supply current for each input that is at one of the specified TTL voltage levels rather than 0 V or VCC.
switching characteristics over recommended operating free-air temperature range, VCC = 5 V 0.5 V (unless otherwise noted) (see Figure 1)
PARAMETER tPLH tPHL FROM (INPUT) A or B or TO (OUTPUT) Y MIN 1 1 TA = 25°C TYP MAX 6.5 6.5 9 9 SN54ACT32 MIN MAX SN74ACT32 MIN 1 1 MAX 10 10 UNIT ns
"
operating characteristics, VCC = 5 V, TA = 25°C
PARAMETER Cpd Power dissipation capacitance TEST CONDITIONS CL = 50 pF, f = 1 MHz TYP 40 UNIT pF
PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice.
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
3
Others parts begin by sn
SN-1 SN-2 SN-3 SN-4 SN-5 SN-6 SN-7 SN-8 SN-9 SN-10 SN-11 SN-12 SN-13 SN-14 SN-15 SN-16 SN-17 SN-18 SN-19 SN-20 SN-21 SN-22 SN-23 SN-24 SN-25 SN-26 SN-27 SN-28 SN-29 SN-30 SN-31 SN-32 SN-33 SN-34 SN-35 SN-36 SN-37 SN-38 SN-39 SN-40 SN-41 SN-42 SN-43 SN-44 SN-45 SN-46 SN-47 SN-48 SN-49 SN-50 SN-51 SN-52 SN-53 SN-54 SN-55 SN-56 SN-57 SN-58 SN-59 SN-60 SN-61 SN-62 SN-63 SN-64 SN-65 SN-66 SN-67 SN-68 SN-69 SN-70 SN-71 SN-72 SN-73 SN-74 SN-75 SN-76 SN-77 SN-78 SN-79 SN-80 SN-81 SN-82 SN-83 SN-84 SN-85 SN-86 SN-87 SN-88 SN-89 SN-90 SN-91 SN-92 SN-93 SN-94 SN-95 SN-96 SN-97 SN-98 SN-99 SN-100 SN-101 SN-102 SN-103 SN-104 SN-105 SN-106 SN-107 SN-108 SN-109 SN-110 SN-111 SN-112 SN-113 SN-114 SN-115 SN-116 SN-117 SN-118 SN-119 SN-120 SN-121
|
|
|
