|
Details, datasheet, quote on part number:SN74ALVC16721
| |
Datasheet text preview:
SN74ALVC16721 3.3-V 20-BIT FLIP-FLOP WITH 3-STATE OUTPUTS
SCAS267A MARCH 1993 REVISED MAY 1995
D D D D D D
Member of the Texas Instruments Widebus TM Family EPIC TM (Enhanced-Performance Implanted CMOS) Submicron Process ESD Protection Exceeds 2000 V Per MIL-STD-883C, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0) Latch-Up Performance Exceeds 250 mA Per JEDEC Standard JESD-17 Bus Hold On Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors Package Options Include Plastic 300-mil Shrink Small-Outline (DL) and Thin Shrink Small-Outline (DGG) Packages
DGG OR DL PACKAGE (TOP VIEW)
description
This 20-bit flip-flop is designed specifically for low-voltage (3.3-V) VCC operation; it is tested at 2.5-V, 2.7-V, and 3.3-V VCC. The SN74ALVC16721's 20 flip-flops are edgetriggered D-type flip-flops with qualified clock storage. On the positive transition of the clock (CLK) input, the device provides true data at the Q outputs if the clock-enable (CLKEN) input is low. If CLKEN is high, no data is stored.
30 A buffered output-enable (OE) input places the 28 29 20 outputs in either a normal logic state (high or low level) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components. OE does not affect the internal operation of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
OE Q1 Q2 GND Q3 Q4 VCC Q5 Q6 Q7 GND Q8 Q9 Q10 Q11 Q12 Q13 GND Q14 Q15 Q16 VCC Q17 Q18 GND Q19 Q20 NC
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31
CLK D1 D2 GND D3 D4 VCC D5 D6 D7 GND D8 D9 D10 D11 D12 D13 GND D14 D15 D16 VCC D17 D18 GND D19 D20 CLKEN
Active bus-hold circuitry holds unused or floating data inputs at a valid logic level. The SN74ALVC16721 is available in TI's shrink small-outline (DL) and thin shrink small-outline (DGG) packages, which provide twice the I/O pin count and functionality of standard small-outline packages in the same printed-circuit-board area. The SN74ALVC16721 is characterized for operation from 40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. EPIC and Widebus are trademarks of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Copyright © 1995, Texas Instruments Incorporated
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
1
SN74ALVC16721 3.3-V 20-BIT FLIP-FLOP WITH 3-STATE OUTPUTS
SCAS267A MARCH 1993 REVISED MAY 1995
FUNCTION TABLE (each flip-flop) INPUTS OE L L L L H CLKEN H L L L X CLK X L or H X D X H L X X OUTPUT Q Q0 H L Q0 Z
logic diagram (positive logic)
OE 1
CLK
56
CLKEN
29
CE C1 2
D1
55 1D
Q1
To 19 Other Channels
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 4.6 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to VCC + 0.5 V Output voltage range, VO (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to VCC + 0.5 V Input clamp current, IIK (VI VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 100 mA Maximum power dissipation at TA = 55°C (in still air) (see Note 3): DGG package . . . . . . . . . . . . . . . . . . 1 W DL package . . . . . . . . . . . . . . . . . . 1.4 W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 4.6 V maximum. 3. The maximum package power dissipation is calculated using a junction temperature of 150°C and a board trace length of 750 mils. For more information, refer to the Package Thermal Considerations application note in the 1994 ABT Advanced BiCMOS Technology Data Book, literature number SCBD002B.
2
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
SN74ALVC16721 3.3-V 20-BIT FLIP-FLOP WITH 3-STATE OUTPUTS
SCAS267A MARCH 1993 REVISED MAY 1995
recommended operating conditions (see Note 4)
MIN VCC VIH VIL VI VO IOH Supply voltage High-level input voltage input voltage Low-level input voltage input voltage Input voltage Output voltage High-level output current VCC = 2.3 V VCC = 2.7 V VCC = 3 V VCC = 2.3 V IOL t /v Low-level output current Input transition rise or fall rate VCC = 2.7 V VCC = 3 V 0 40 VCC = 2.3 V to 2.7 V VCC = 2.7 V to 3.6 V VCC = 2.3 V to 2.7 V VCC = 2.7 V to 3.6 V 0 0 2.3 1.7 2 0.7 0.8 VCC VCC 12 12 24 12 12 24 10 85 ns / V °C mA mA MAX 3.6 UNIT V V V V V
TA Operating free-air temperature NOTE 4: Unused or floating control pins must be held high or low.
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
3
|
|
