|
|
Part: SN74ALVCH16721DGG
Category:
Logic
-> Buffers/Inverters
-> 3-State
Description: 3.3-v 20-bit Flip-flop With 3-state Outputs
Company: Texas Instruments, Inc.
Datasheet: Download SN74ALVCH16721DGG datasheet File size : 138 kB
Request For quote: Find where to buy SN74ALVCH16721DGG
Datasheet text preview:
SN74ALVCH16721 3.3-V 20-BIT FLIP-FLOP WITH 3-STATE OUTPUTS
SCES052D JULY 1995 REVISED FEBRUARY 1999
D D D D D D
Member of the Texas Instruments Widebus TM Family EPIC TM (Enhanced-Performance Implanted CMOS) Submicron Process ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0) Latch-Up Performance Exceeds 250 mA Per JESD 17 Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors Package Options Include Plastic 300-mil Shrink Small-Outline (DL), Thin Shrink Small-Outline (DGG), and Thin Very Small-Outline (DGV) Packages
DGG, DGV, OR DL PACKAGE (TOP VIEW)
description
This 20-bit flip-flop is designed specifically for 1.65-V to 3.6-V VCC operation. The 20 flip-flops of the SN74ALVCH16721 are edge-triggered D-type flip-flops with qualified clock storage. On the positive transition of the clock (CLK) input, the device provides true data at the Q outputs if the clock-enable (CLKEN) input is low. If CLKEN is high, no data is stored. A buffered output-enable (OE) input places the 20 outputs in either a normal logic state (high or low) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components. OE does not affect the internal operation of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
OE Q1 Q2 GND Q3 Q4 VC C Q5 Q6 Q7 GND Q8 Q9 Q10 Q11 Q12 Q13 GND Q14 Q15 Q16 VC C Q17 Q18 GND Q19 Q20 NC
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29
CLK D1 D2 GND D3 D4 VC C D5 D6 D7 GND D8 D9 D10 D11 D12 D13 GND D14 D15 D16 VC C D17 D18 GND D19 D20 CLKEN
NC No internal connection
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level. The SN74ALVCH16721 is characterized for operation from 40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. EPIC and Widebus are trademarks of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Copyright © 1999, Texas Instruments Incorporated
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
1
SN74ALVCH16721 3.3-V 20-BIT FLIP-FLOP WITH 3-STATE OUTPUTS
SCES052D JULY 1995 REVISED FEBRUARY 1999
FUNCTION TABLE (each flip-flop) INPUTS OE L L L L H CLKEN H L L L X CLK X L or H X D X H L X X OUTPUT Q Q0 H L Q0 Z
logic diagram (positive logic)
1 OE 56 CLK 29 CLKEN 55 1D CE C1 D1 2 Q1
To 19 Other Channels
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 4.6 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 4.6 V Output voltage range, VO (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Output clamp current, IOK (VO < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Continuous output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA Continuous current through each VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±100 mA Package thermal impedance, JA (see Note 3): DGG package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81°C/W DGV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W DL package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. This value is limited to 4.6 V maximum. 3. The package thermal impedance is calculated in accordance with JESD 51.
2
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
SN74ALVCH16721 3.3-V 20-BIT FLIP-FLOP WITH 3-STATE OUTPUTS
SCES052D JULY 1995 REVISED FEBRUARY 1999
recommended operating conditions (see Note 4)
MIN VCC VIH Supply voltage High-level input voltage VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 2.7 V to 3.6 V VCC = 1.65 V to 1.95 V VIL VI VO Low-level input voltage Input voltage Output voltage VCC = 1.65 V VCC = 2.3 V VCC = 2.7 V VCC = 3 V VCC = 1.65 V VCC = 2.3 V VCC = 2.7 V VCC = 3 V VCC = 2.3 V to 2.7 V VCC = 2.7 V to 3.6 V 0 0 1.65 0.65 × VCC 1.7 2 0.35 × VCC 0.7 0.8 VCC VCC 4 12 12 24 4 12 12 24 10 ns/V mA mA V V V V MAX 3.6 UNIT V
IOH
High-level output current output current
IOL
Low-level output current output current
t/v
Input transition rise or fall rate
TA Operating free-air temperature 40 85 °C NOTE 4: All unused control inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
3
Others parts begin by sn
SN-1 SN-2 SN-3 SN-4 SN-5 SN-6 SN-7 SN-8 SN-9 SN-10 SN-11 SN-12 SN-13 SN-14 SN-15 SN-16 SN-17 SN-18 SN-19 SN-20 SN-21 SN-22 SN-23 SN-24 SN-25 SN-26 SN-27 SN-28 SN-29 SN-30 SN-31 SN-32 SN-33 SN-34 SN-35 SN-36 SN-37 SN-38 SN-39 SN-40 SN-41 SN-42 SN-43 SN-44 SN-45 SN-46 SN-47 SN-48 SN-49 SN-50 SN-51 SN-52 SN-53 SN-54 SN-55 SN-56 SN-57 SN-58 SN-59 SN-60 SN-61 SN-62 SN-63 SN-64 SN-65 SN-66 SN-67 SN-68 SN-69 SN-70 SN-71 SN-72 SN-73 SN-74 SN-75 SN-76 SN-77 SN-78 SN-79 SN-80 SN-81 SN-82 SN-83 SN-84 SN-85 SN-86 SN-87 SN-88 SN-89 SN-90 SN-91 SN-92 SN-93 SN-94 SN-95 SN-96 SN-97 SN-98 SN-99 SN-100 SN-101 SN-102 SN-103 SN-104 SN-105 SN-106 SN-107 SN-108 SN-109 SN-110 SN-111 SN-112 SN-113 SN-114 SN-115 SN-116 SN-117 SN-118 SN-119 SN-120 SN-121
|
|
|
