|
Details, datasheet, quote on part number:SN74AUC2GU04YZPR
| |
Datasheet text preview:
SN74AUC2GU04 DUAL INVERTER GATE
SCES438 APRIL 2003
D D D D D D D D D
Available in the Texas Instruments NanoStar and NanoFree Packages Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation Sub 1-V Operable Unbuffered Outputs Max tpd of 1.9 ns at 1.8 V Low Power Consumption, 10 µA at 1.8 V ±8-mA Output Drive at 1.8 V Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Protection Exceeds JESD 22 2000-V Human-Body Model (A114-A) 200-V Machine Model (A115-A) 1000-V Charged-Device Model (C101)
DBV OR DCK PACKAGE (TOP VIEW)
1A GND 2A
1 2 3
6 5 4
1Y VCC 2Y
YEA OR YZA PACKAGE (BOTTOM VIEW)
2A GND 1A
34 25 16
2Y VCC 1Y
description/ordering information
This dual inverter is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V VCC operation. The SN74AUC2GU04 contains two inverters with unbuffered outputs and performs the Boolean function Y = A. NanoStar and NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package. ORDERING INFORMATION
TA NanoStar WCSP (DSBGA) YEA 40°C to 85°C NanoFree WCSP (DSBGA) YZA (Pb-free) SOT (SOT-23) DBV SOT (SC-70) DCK PACKAGE Tape and reel Tape and reel Tape and reel Tape and reel ORDERABLE PART NUMBER SN74AUC2GU04YEAR UD _ _ _UD_ SN74AUC2GU04YZAR SN74AUC2GU04DBVR SN74AUC2GU04DCKR UU4_ UD_ TOP-SIDE MARKING
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site. YEA/YZA: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following character to designate the assembly/test site. FUNCTION TABLE (each inverter) INPUT A H L OUTPUT Y L H
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. NanoStar and NanoFree are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Copyright 2003, Texas Instruments Incorporated
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
1
SN74AUC2GU04 DUAL INVERTER GATE
SCES438 APRIL 2003
logic diagram (positive logic)
1A 1 6 1Y
2A
3
4
2Y
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 3.6 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 3.6 V Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Output clamp current, IOK (VO < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Continuous output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±100 mA Package thermal impedance, JA (see Note 2): DBV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165°C/W DCK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258°C/W YEA/YZA package . . . . . . . . . . . . . . . . . . . . . . . . . . . 143°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions (see Note 3)
MIN VCC VIH VIL VI VO Supply voltage High-level input voltage Low-level input voltage Input voltage Output voltage VCC = 0.8 V VCC = 1.1 V IOH High-level output current VCC = 1.4 V VCC = 1.65 V VCC = 2.3 V VCC = 0.8 V IOL Low-level output current VCC = 1.1 V VCC = 1.4 V VCC = 1.65 V VCC = 2.3 V t/v Input transition rise or fall rate IO = 100 mA IO = 100 mA 0.8 0.65 × VCC 0.35 × VCC 0 0 3.6 VCC 0.7 3 5 8 9 0.7 3 5 8 9 20 ns/V mA mA MAX 2.7 UNIT V V V V V
TA Operating free-air temperature 40 85 °C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
2
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
SN74AUC2GU04 DUAL INVERTER GATE
SCES438 APRIL 2003
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER IOH = 100 µA IOH = 0.7 mA VOH IOH = 3 mA IOH = 5 mA IOH = 8 mA IOH = 9 mA IOL = 100 µA IOL = 0.7 mA VOL IOL = 3 mA IOL = 5 mA IOL = 8 mA IOL = 9 mA II ICC A inputs VI = VCC or GND VI = VCC or GND, IO = 0 VIH = VCC VIL = GND GND TEST CONDITIONS VCC 0.8 V to 2.7 V 0.8 V 1.1 V 1.4 V 1.65 V 2.3 V 0.8 V to 2.7 V 0.8 V 1.1 V 1.4 V 1.65 V 2.3 V 0 to 2.7 V 0.8 V to 2.7 V 2.5 V 2.5 0.25 0.3 0.4 0.45 0.6 ±5 10 µA µA pF V 0.8 1 1.2 1.8 0.2 MIN VCC0.1 0.55 V TYP MAX UNIT
Ci VI = VCC or GND All typical values are at TA = 25°C.
switching characteristics over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 1)
PARAMETER tpd FROM (INPUT) A TO (OUTPUT) Y VCC = 0.8 V TYP 6.2 VCC = 1.2 V ± 0.1 V MIN 0.7 MAX 3.1 VCC = 1.5 V ± 0.1 V MIN 0.7 MAX 2.2 VCC = 1.8 V ± 0.15 V MIN 0.6 TYP 1.1 MAX 1.9 VCC = 2.5 V ± 0.2 V MIN 0.5 MAX 1.4 ns UNIT
switching characteristics over recommended operating free-air temperature range, CL = 30 pF (unless otherwise noted) (see Figure 1)
PARAMETER tpd FROM (INPUT) A TO (OUTPUT) Y VCC = 1.8 V ± 0.15 V MIN 0.7 TYP 1.6 MAX 2.7 VCC = 2.5 V ± 0.2 V MIN 0.5 MAX 2 ns UNIT
operating characteristics, TA = 25°C
PARAMETER Cpd Power dissipation capacitance TEST CONDITIONS f = 10 MHz VCC = 0.8 V TYP 4.5 VCC = 1.2 V TYP 4.5 VCC = 1.5 V TYP 4.5 VCC = 1.8 V TYP 4.5 VCC = 2.5 V TYP 5.5 UNIT pF
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
3
|
|
