|
Details, datasheet, quote on part number:SN74BCT29823DW
| |
Datasheet text preview:
SN74BCT29823 9-BIT BUS-INTERFACE FLIP-FLOP WITH 3-STATE OUTPUTS
SCBS018D NOVEMBER 1988 REVISED NOVEMBER 1993
· · · ·
State-of-the-Art BiCMOS Design Significantly Reduces ICCZ ESD Protection Exceeds 2000 V Per MIL-STD-883C, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0) 3-State Buffer-Type Outputs Drive Bus Lines Directly Package Options Include Plastic Small-Outline (DW) Packages and Standard Plastic 300-mil DIPs (NT)
DW OR NT PACKAGE (TOP VIEW)
description
This 9-bit bus-interface flip-flop features 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing wider buffer registers, I/O ports, bidirectional bus drivers with parity, and working registers.
OE 1D 2D 3D 4D 5D 6D 7D 8D 9D CLR GND
1 2 3 4 5 6 7 8 9 10 11 12
24 23 22 21 20 19 18 17 16 15 14 13
VCC 1Q 2Q 3Q 4Q 5Q 6Q 7Q 8Q 9Q CLKEN CLK
The nine flip-flops are edge-triggered D-type flip-flops. With the clock-enable (CLKEN) input low, the flip-flops store data on the low-to-high transitions of the clock. Taking CLKEN high disables the clock buffer, thus latching the outputs. The SN74BCT29823 has noninverting data (D) inputs. Taking the clear (CLR) input low causes the nine Q outputs to go low independent of the clock. A buffered output-enable (OE) input can be used to place the nine outputs in either a normal logic state (high or low) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components. The output enable (OE) does not affect the internal operation of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state. The SN74BCT29823 is characterized for operation from 0°C to 70°C.
FUNCTION TABLE (each flip-flop) INPUTS OE L L L L H CLR L H H H X CLKEN X L L H X CLK X X X D X H L X X OUTPUT Q L H L Q0 Z
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Copyright © 1993, Texas Instruments Incorporated
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
21
SN74BCT29823 9-BIT BUS-INTERFACE FLIP-FLOP WITH 3-STATE OUTPUTS
SCBS018D NOVEMBER 1988 REVISED NOVEMBER 1993
logic symbol
OE CLR CLKEN CLK 1 11 14 13 EN R G1 1C2 23 22 21 20 19 18 17 16 15
1D 2D 3D 4D 5D 6D 7D 8D 9D
2 3 4 5 6 7 8 9 10
2D
1Q 2Q 3Q 4Q 5Q 6Q 7Q 8Q 9Q
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
logic diagram (positive logic)
OE CLR CLKEN 1 11 14
CLK
13
R C1 1D 2 1D 23 1Q
To Eight Other Channels
22
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
SN74BCT29823 9-BIT BUS-INTERFACE FLIP-FLOP WITH 3-STATE OUTPUTS
SCBS018D NOVEMBER 1988 REVISED NOVEMBER 1993
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 7 V Voltage range applied to any output in the disabled or power-off state, VO . . . . . . . . . . . . . . . . 0.5 V to 5.5 V Voltage range applied to any output in the high state, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to VCC Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA Current into any output in the low state, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 mA Operating free-air temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
recommended operating conditions
MIN VCC VIH VIL IIK IOH IOL TA Supply voltage High-level input voltage Low-level input voltage Input clamp current High-level output current Low-level output current Operating free-air temperature 0 4.5 2 0.8 18 24 48 70 NOM 5 MAX 5.5 UNIT V V V mA mA mA °C
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER VIK VOH VOL II IIH IIL IOS§ IOZH IOZL ICCL ICCH ICCZ Ci Co VCC = 4.5 V, VCC = 4 5 V 4.5 VCC = 4.5 V, VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V, VCC = 5 V, VCC = 5 V, TEST CONDITIONS II = 18 mA IOH = 15 mA IOH = 24 mA IOL = 48 mA VI = 7 V VI = 2.7 V VI = 0.5 V VO = 0 VO = 2.7 V VO = 0.5 V Outputs open Outputs open Outputs open VI = 2.5 V or 0.5 V VO = 2.5 V or 0.5 V 25 6 2 5.5 7 MIN 2.4 2 0.35 10 75 0.5 0.1 75 0.2 250 20 20 35 10 6 TYP 3.2 MAX 1.2 UNIT V V V mA µA mA mA µA µA mA mA mA pF pF
All typical values are at VCC = 5 V, TA = 25°C. § Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
23
|
|
