|
Details, datasheet, quote on part number:SN74CBT16210DGG
| |
Datasheet text preview:
SN74CBT16210 20-BIT FET BUS SWITCH
SCDS033C APRIL 1997 REVISED MAY 1998
D D D
5- Switch Connection Between Two Ports TTL-Compatible Input Levels Package Options Include Plastic 300-mil Shrink Small-Outline (DL), Thin Shrink Small-Outline (DGG), and Thin Very Small-Outline (DGV) Packages
DGG, DGV, OR DL PACKAGE (TOP VIEW)
description
The SN74CBT16210 provides 20 bits of high-speed TTL-compatible bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The device is organized as a dual 10-bit bus switch with separate output-enable (OE) inputs. It can be used as two 10-bit bus switches or as one 20-bit bus switch. When OE is low, the associated 10-bit bus switch is on and port A is connected to port B. When OE is high, the switch is open, and a high-impedance state exists between the ports. The SN74CBT16210 is characterized operation from 40°C to 85°C.
FUNCTION TABLE (each 10-bit bus switch) INPUT OE L H FUNCTION A port = B port Disconnect
for
NC 1A1 1A2 1A3 1A4 1A5 1A6 GND 1A7 1A8 1A9 1A10 2A1 2A2 VCC 2A3 GND 2A4 2A5 2A6 2A7 2A8 2A9 2A10
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25
1OE 2OE 1B1 1B2 1B3 1B4 1B5 GND 1B6 1B7 1B8 1B9 1B10 2B1 2B2 2B3 GND 2B4 2B5 2B6 2B7 2B8 2B9 2B10
NC No internal connection
logic diagram (positive logic)
1A1 2 46 1B1
12 1A10 48 1OE 13
36 1B10
2A1
35
2B1
24 2A10 47 2OE
25 2B10
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Copyright © 1998, Texas Instruments Incorporated
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
1
SN74CBT16210 20-BIT FET BUS SWITCH
SCDS033C APRIL 1997 REVISED MAY 1998
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 7 V Continuous channel current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 mA Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Package thermal impedance, JA (see Note 2): DGG package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89°C/W DGV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93°C/W DL package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51.
recommended operating conditions (see Note 3)
MIN VCC VIH VIL TA Supply voltage High-level control input voltage Low-level control input voltage Operating free-air temperature 40 4 2 0.8 85 MAX 5.5 UNIT V V V °C
NOTE 3: All unused control inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER VIK II ICC ICC§ Ci Cio(OFF) VCC = 4.5 V, VCC = 0 V, VCC = 5.5 V, VCC = 5.5 V, Control inputs Control inputs VCC = 5.5 V, VI = 3 V or 0 VO = 3 V or 0, VCC = 4 V, TYP at VCC = 4 V TEST CONDITIONS II = 18 mA VI = 5.5 V VI = 5.5 V or GND IO = 0, One input at 3.4 V, OE = VCC VI = 2.4 V, VI = 0 II = 15 mA II = 64 mA II = 30 mA VI = VCC or GND Other inputs at VCC or GND 4.5 5.5 14 5 5 20 7 7 MIN TYP MAX 1.2 10 ±1 3 2.5 UNIT V µA µA mA pF pF
ron¶ VCC = 4.5 V
VI = 2.4 V, II = 15 mA 8 12 All typical values are at VCC = 5 V (unless otherwise noted), TA = 25°C. § This is the increase in supply current for each input that is at the specified TTL voltage level rather than VCC or GND. ¶ Measured by the voltage drop between the A and B terminals at the indicated current through the switch. On-state resistance is determined by the lowest voltage of the two (A or B) terminals.
2
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
SN74CBT16210 20-BIT FET BUS SWITCH
SCDS033C APRIL 1997 REVISED MAY 1998
switching characteristics over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 1)
PARAMETER tpd ten FROM (INPUT) A or B OE TO (OUTPUT) B or A A or B VCC = 4 V MIN MAX 0.35 9.3 3.3 VCC = 5 V ± 0.5 V MIN MAX 0.25 8.6 ns ns UNIT
tdis OE A or B 7.1 2.8 7.9 ns The propagation delay is the calculated RC time constant of the typical on-state resistance of the switch and the specified load capacitance, when driven by an ideal voltage source (zero output impedance).
PARAMETER MEASUREMENT INFORMATION
7V From Output Under Test CL = 50 pF (see Note A) 500 S1 Open GND 500 Output Control (low-level enabling) tPZL Output Waveform 1 S1 at 7 V (see Note B) tPZH VOH Output 1.5 V VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES 1.5 V VOL Output Waveform 2 S1 at Open (see Note B) tPLZ 1.5 V tPHZ VOH VOH 0.3 V 0V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES 3.5 V VOL + 0.3 V VOL TEST tpd tPLZ/tPZL tPHZ/tPZH S1 Open 7V Open
3V 1.5 V 1.5 V 0V
LOAD CIRCUIT
3V Input 1.5 V 1.5 V 0V tPLH tPHL
1.5 V
NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr 2.5 ns, tf 2.5 ns. D. The outputs are measured one at a time with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd.
Figure 1. Load Circuit and Voltage Waveforms
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
3
|
|
