|
Details, datasheet, quote on part number:SN74F86DR
| |
Datasheet text preview:
SN54F86, SN74F86 QUADRUPLE 2-INPUT EXCLUSIVE-OR GATES
SDFS019B JANUARY 1989 REVISED JANUARY 1997
D
Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs
SN54F86 . . . J PACKAGE SN74F86 . . . D OR N PACKAGE (TOP VIEW)
description
These devices contain four independent 2-input exclusive-OR gates. They perform the Boolean function Y = A B or Y = AB + AB in positive logic. A common application is as a true/complement element. If one of the inputs is low, the other input is reproduced in true form at the output. If one of the inputs is high, the signal on the other input is reproduced inverted at the output. The SN54F86 is characterized for operation over the full military temperature range of 55°C to 125°C. The SN74F86 is characterized for operation from 0°C to 70°C.
FUNCTION TABLE (each gate) INPUTS A L L H H B L H L H OUTPUT Y L H H L
1A 1B 1Y 2A 2B 2Y GND
1 2 3 4 5 6 7
14 13 12 11 10 9 8
VCC 4B 4A 4Y 3B 3A 3Y
SN54F86 . . . FK PACKAGE (TOP VIEW)
1Y NC 2A NC 2B
4 5 6 7 8
3 2 1 20 19 18 17 16 15 14 9 10 11 12 13
1B 1A NC VCC 4B 4A NC 4Y NC 3B
NC No internal connection =1 3 1Y 6 2Y 8 3Y 11 4Y
Copyright © 1997, Texas Instruments Incorporated
logic symbol
1A 1B 2A 2B 3A 3B 4A 4B 1 2 4 5 9 10 12 13
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the D, J, and N packages.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. EPIC is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
2Y GND NC 3Y 3A
1
SN54F86, SN74F86 QUADRUPLE 2-INPUT EXCLUSIVE-OR GATES
SDFS019B JANUARY 1989 REVISED JANUARY 1997
exclusive-OR logic
An exclusive-OR gate has many applications, some of which can be represented better by alternative logic symbols.
EXCLUSIVE OR =1
These are five equivalent exclusive-OR symbols valid for an 'F86 gate in positive logic; negation may be shown at any two ports. LOGIC-IDENTITY ELEMENT = EVEN-PARITY ELEMENT 2k ODD-PARITY ELEMENT 2k + 1
The output is active (low) if all inputs stand at the same logic level (i.e., A = B).
The output is active (low) if an even number of inputs (i.e., 0 or 2) are active.
The output is active (high) if an odd number of outputs (i.e., only 1 of the 2) are active.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 V to 7 V Input current range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA to 5 mA Voltage range applied to any output in the high state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to VCC Current into any output in the low state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA Package thermal impedance, JA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input voltage ratings may be exceeded provided the input current ratings are observed. 2. The package thermal impedance is calculated in accordance with EIA/JEDEC Std JESD51, except for through-hole packages, which use a trace length of zero.
recommended operating conditions
SN54F86 MIN VCC VIH VIL IIK IOH IOL TA Supply voltage High-level input voltage Low-level input voltage Input clamp current High-level output current Low-level output current Operating free-air temperature 55 4.5 2 0.8 18 1 20 125 0 NOM 5 MAX 5.5 MIN 4.5 2 0.8 18 1 20 70 SN74F86 NOM 5 MAX 5.5 UNIT V V V mA mA mA °C
2
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
SN54F86, SN74F86 QUADRUPLE 2-INPUT EXCLUSIVE-OR GATES
SDFS019B JANUARY 1989 REVISED JANUARY 1997
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER VIK VOH VOL II IIH IIL IOS ICCH VCC = 4.5 V, VCC = 4.5 V, VCC = 4.75 V, VCC = 4.5 V, VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V, TEST CONDITIONS CONDITIONS II = 18 mA IOH = 1 mA IOH = 1 mA IOL = 20 mA VI = 7 V VI = 2.7 V VI = 0.5 V VO = 0 60 MIN 2.5 SN54F86 TYP MAX 1.2 3.4 0.3 0.5 0.1 20 0.6 150 60 2.5 2.7 0.3 0.5 0.1 20 0.6 150 23 28 3.4 MIN SN74F86 TYP MAX 1.2 UNIT V V V mA µA mA mA mA mA
VCC = 5.5 V, See Note 3 15 23 15 ICCL VCC = 5.5 V, VI = 4.5 V 18 28 18 All typical values are at VCC = 5 V, TA = 25°C. Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second. NOTE 3: ICCH is measured with outputs open, and the A or B input (not both) at 4.5 V. Remaining inputs are grounded.
switching characteristics (see Figure 1)
VCC = 5 V, CL = 50 pF, RL = 500 , TA = 25°C F86 MIN tPLH tPHL tPLH tPHL A or B (other input low) A or B (other input high) Y Y 3 3 3.5 3 TYP 4 4.2 5.3 4.7 MAX 5.5 5.5 7 6.5 VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500, TA = MIN to MAX§ SN54F86 MIN 3 2.6 3.5 3 MAX 7 8 10 8 SN74F86 MIN 3 3 3.5 3 MAX 6.5 6.5 8 7.5 ns ns
PARAMETER
FROM (INPUT)
TO (OUTPUT)
UNIT
§ For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
3
|
|
