|
|
Part: SNJ54F240FK
Category:
Logic
-> Buffers/Drivers
-> Inverting Buffers and Drivers
Description: ti SN54F240, Octal Buffers/drivers With 3-State Outputs
Company: Texas Instruments, Inc.
Datasheet: Download SNJ54F240FK datasheet File size : 214 kB
Request For quote: Find where to buy SNJ54F240FK
Datasheet text preview:
SN54F240, SN74F240 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
SDFS061A D2932, MARCH 1987 REVISED OCTOBER 1993
· ·
3-State Outputs Drive Bus Lines or Buffer Memory Address Registers Package Options Include Plastic Small-Outline (SOIC) and Shrink Small-Outline (SSOP) Packages, Ceramic Chip Carriers, and Plastic and Ceramic DIPs
SN54F240 . . . J PACKAGE SN74F240 . . . DB, DW, OR N PACKAGE (TOP VIEW)
description
These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. Taken together with the F241 and F244, these devices provide the choice of selected combinations of inverting and noninverting outputs, symmetrical OE (active-low output-enable) inputs, and complementary OE and OE inputs. The F240 is organized as two 4-bit buffers/line drivers with separate output enable (OE) inputs. When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state. The SN74F240 is available in TI's shrink small-outline package (DB), which provides the same I/O pin count and functionality of standard small-outline packages in less than half the printed-circuit-board area. The SN54F240 is characterized for operation over the full military temperature range of 55°C to 125°C. The SN74F240 is characterized for operation from 0°C to 70°C.
FUNCTION TABLE (each buffer) INPUTS OE L L H A H L X OUTPUT Y L H Z
1OE 1A1 2Y4 1A2 2Y3 1A3 2Y2 1A4 2Y1 GND
1 2 3 4 5 6 7 8 9 10
20 19 18 17 16 15 14 13 12 11
VCC 2OE 1Y1 2A4 1Y2 2A3 1Y3 2A2 1Y4 2A1
SN54F240 . . . FK PACKAGE (TOP VIEW)
2Y4 1A1 1OE VCC
1A2 2Y3 1A3 2Y2 1A4
4 5 6 7 8
3 2 1 20 19 18 17 16 15 14 9 10 11 12 13
2OE 1Y1 2A4 1Y2 2A3 1Y3
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
2Y1 GND 2A1 1Y4 2A2
Copyright © 1993, Texas Instruments Incorporated
21
SN54F240, SN74F240 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
SDFS061A D2932, MARCH 1987 REVISED OCTOBER 1993
logic symbol
1OE 1 EN 18 16 14 12
logic diagram (positive logic)
1 1OE 18
1A1 1A2 1A3 1A4
2 4 6 8
2 1Y1 1Y2 1Y3 1Y4 6 1A3 1A2 4 1A1
1Y1
16
1Y2
14 1Y3 12 1Y4
2OE
19
EN 8 9 7 5 3 1A4 2Y1 2Y2 2Y3 2Y4 11 2OE 19
2A1 2A2 2A3 2A4
11 13 15 17
9 2Y1 7 2Y2 5 2Y3 3
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
2A1 13
2A2
15 2A3 17
2A4
2Y4
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 V to 7 V Input current range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA to 5 mA Voltage range applied to any output in the disabled or power-off state . . . . . . . . . . . . . . . . . . . 0.5 V to 5.5 V Voltage range applied to any output in the high state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to VCC Current into any output in the low state: SN54F240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 mA SN74F240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 mA Operating free-air temperature range: SN54F240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55°C to 125°C SN74F240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input voltage ratings may be exceeded provided the input current ratings are observed.
22
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
SN54F240, SN74F240 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
SDFS061A D2932, MARCH 1987 REVISED OCTOBER 1993
recommended operating conditions
SN54F240 MIN VCC VIH VIL IIK IOH IOL TA Supply voltage High-level input voltage Low-level input voltage Input clamp current High-level output current Low-level output current Operating free-air temperature 55 4.5 2 0.8 18 12 48 125 0 NOM 5 MAX 5.5 SN74F240 MIN 4.5 2 0.8 18 15 64 70 NOM 5 MAX 5.5 UNIT V V V mA mA mA °C
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER VIK VCC = 4.5 V, VCC = 4.5 V VCC = 4.75 V, VOL IOZH IOZL II IIH IIL IOS ICC VCC = 4 5 V 4.5 VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V, VCC = 5.5 V TEST CONDITIONS CONDITIONS II = 18 mA IOH = 3 mA IOH = 12 mA IOH = 15 mA IOH = 3 mA IOL = 48 mA IOL = 64 mA VO = 2.7 V VO = 0.5 V VI = 7 V VI = 2.7 V VI = 0.5 V VO = 0 Outputs high Outputs low Outputs disabled 100 19 50 42 MIN SN54F240 TYP MAX 1.2 2.4 2 3.3 3.2 2 2.7 0.38 0.55 0.42 50 50 0.1 20 1 225 29 75 63 100 19 50 42 0.55 50 50 0.1 20 1 225 29 75 63 mA V µA µA mA µA mA mA 3.1 2.4 3.3 V MIN SN74F240 TYP MAX 1.2 UNIT V
VOH
All typical values are at VCC = 5 V, TA = 25°C. Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second.
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
23
SN54F240, SN74F240 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
SDFS061A D2932, MARCH 1987 REVISED OCTOBER 1993
switching characteristics (see Note 2)
VCC = 5 V, CL = 50 pF, RL = 500 , TA = 25°C F240 MIN tPLH tPHL tPZH tPZL tPHZ tPLZ Any A Y Y Y 2.2 1.2 1.2 3.2 1.2 1.2 TYP 4.7 3.1 3.1 6.5 3.6 5.6 MAX 7 4.7 5.3 9 5.3 8 VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 , TA = MIN to MAX SN54F240 MIN 2.2 1.2 1.2 3.2 1.2 1.2 MAX 9 6 6.7 10.5 6.5 12.5 SN74F240 MIN 2.2 1.2 1.2 3.2 1.2 1.2 MAX 8 5.7 6.1 10 6.3 9.5 ns ns ns
PARAMETER
FROM (INPUT)
TO (OUTPUT)
UNIT
OE OE
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. NOTE 2: Load circuits and waveforms are shown in Section 1.
24
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE ("CRITICAL APPLICATIONS"). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK. In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof.
Copyright © 1998, Texas Instruments Incorporated
Others parts begin by sn
SN-1 SN-2 SN-3 SN-4 SN-5 SN-6 SN-7 SN-8 SN-9 SN-10 SN-11 SN-12 SN-13 SN-14 SN-15 SN-16 SN-17 SN-18 SN-19 SN-20 SN-21 SN-22 SN-23 SN-24 SN-25 SN-26 SN-27 SN-28 SN-29 SN-30 SN-31 SN-32 SN-33 SN-34 SN-35 SN-36 SN-37 SN-38 SN-39 SN-40 SN-41 SN-42 SN-43 SN-44 SN-45 SN-46 SN-47 SN-48 SN-49 SN-50 SN-51 SN-52 SN-53 SN-54 SN-55 SN-56 SN-57 SN-58 SN-59 SN-60 SN-61 SN-62 SN-63 SN-64 SN-65 SN-66 SN-67 SN-68 SN-69 SN-70 SN-71 SN-72 SN-73 SN-74 SN-75 SN-76 SN-77 SN-78 SN-79 SN-80 SN-81 SN-82 SN-83 SN-84 SN-85 SN-86 SN-87 SN-88 SN-89 SN-90 SN-91 SN-92 SN-93 SN-94 SN-95 SN-96 SN-97 SN-98 SN-99 SN-100 SN-101 SN-102 SN-103 SN-104 SN-105 SN-106 SN-107 SN-108 SN-109 SN-110 SN-111 SN-112 SN-113 SN-114 SN-115 SN-116 SN-117 SN-118 SN-119 SN-120 SN-121
|
|
|
