Details, datasheet, quote on part number: TL780-05C
DescriptionPositive-voltage Regulators
CompanyTexas Instruments, Inc.
DatasheetDownload TL780-05C datasheet
Find where to buy


Features, Applications

1% Output Tolerance 25C 2% Output Tolerance Over Full Operating Range Thermal Shutdown

Internal Short-Circuit Current Limiting Pinout Identical to A7800 Series Improved Version of A7800 Series

Each fixed-voltage precision regulator in the TL780 series is capable of supplying A of load current. A unique temperature-compensation technique, coupled with an internally trimmed band-gap reference, has resulted in improved accuracy when compared to other three-terminal regulators. Advanced layout techniques provide excellent line, load, and thermal regulation. The internal current-limiting and thermal-shutdown features essentially make the devices immune to overload. ORDERING INFORMATION

TJ VO TYP (V) KC TO-220, short shoulder KCS TO-263 KTT KC TO-220, short shoulder KCS KC TO-220, short shoulder KCS PACKAGE (1) PowerFLEXTM KTE to 125C Reel of 2000 Tube of 50 Tube of 20 Reel of 500 Tube of 50 Tube of 20 Tube of 50 Tube of 20 ORDERABLE PART NUMBER TL780-15CKC TL780-15KCS TOP-SIDE MARKING TL780-15C TL780-15

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerFLEX, PowerPAD are trademarks of Texas Instruments.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

over operating temperature ranges (unless otherwise noted)

MIN VI TJ Tstg (1) Input voltage Operating virtual junction temperature Lead temperature mm (1/16 in) from case for 10 s Storage temperature range 65 MAX UNIT V C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

PACKAGE PowerFLEX (KTE) TO-220 (KC/KCS) TO-263 (KTT) (1) BOARD High K, JESD 51-5 High K, JESD 51-5 High K, JESD 19C/W 25.3C/W

Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature PD = (TJ(max) TA)/JA. Operating at the absolute maximum of 150C can affect reliability. Due to variations in individual device electrical characteristics and thermal resistance, the built-in thermal overload protection may be activated at power levels slightly above or below the rated dissipation. For packages with exposed thermal pads, such as QFN, PowerPADTM, or PowerFLEX, JP is defined as the thermal resistance between the die junction and the bottom of the exposed pad.

MIN IO TJ Input voltage Output current Operating virtual junction temperature 14.5 17.5 MAX C V UNIT

at specified virtual junction temperature, 500 mA (unless otherwise noted)

PARAMETER Output voltage Input voltage regulation Ripple rejection Output voltage regulation Output resistance Temperature coefficient of output voltage Output noise voltage Dropout voltage Input bias current Input bias-current change Short-circuit output current Peak output current 1 A TEST CONDITIONS = 1 kHz to 100 kHz 70 TL780-05C MIN TYP 5 MAX UNIT dB mV mV/C mA A

Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-F capacitor across the input and a 0.22-F capacitor across the output.


Related products with the same datasheet
Some Part number from the same manufacture Texas Instruments, Inc.
TL780-05CKTTR Positive-voltage Regulators
TPS2393DBT Full-featured-48-v Hotswap Power Manager
TL082CPE4 Jfet-input Operational Amplifiers
UC2875DWPG4 Phase Shift Resonant Controller
7BT2L9A-361 HIGH Capacity Environmentally Sealed
TMS3123 HEX 32-bit Static Shift Registers
TLC5540IPWRG4 8-bit High-speed Analog-to-digital Converter
TPS79285 200ma Low Quiescent Current, Ultra-low Noise, High Psrr, Low Dropout Linear Regulator
TL066ID Adjustable Low-power Jfet-input Operatoinal Amplifiers
TLV2775AIDRG4 Family OF 2.7-v High-slew-rate Rail-to-rail Output Operational Amplifiers WITH Shutdown
TL064CDBR Low-power Jfet-input Operational Amplifiers
ACT240 Octal Buffers/drivers WITH 3-state Outputs
ADS8364Y 250khz, 16-bit, 6-channel Simultaneous Sampling Analog-to-digital Converters
BQ24081EVM Bq24081evm 1-A Single-chip Li-ion and Li-pol Charge Management IC Evaluation Module
TL5001QDG4 Pulse-width-modulation Control Circuits
TVP5150 LOW Power Video Decoder WITH Scaling
THS7530PWPG4 High-speed, Fully Differential, Continuously Variable GAIN Amplifier
U1825N High Speed PWM Controller
SN54S412 Multi-mode Buffered Latches
UCC1580- Single Ended Active Clamp/reset PWM
TL2842BD-8 High-performance Current-mode PWM Controllers

OPA2704UA : ti OPA2704, 12V, CMOS, Rail-to-rail I/O, Operational Amplifier

SN54AS374 : CMOS/BiCMOS->AC/ACT Family Octal D-type Edge-triggered Flip-flops With 3-state Outputs

SN74LS541 : Bus Oriented Circuits Octal Buffer And Line Driver With 3-state Outputs

TPS65058RGET : 5-Channel Power Management IC With Two Step-Down Converters And 3 Low-Input Voltage LDOs The TPS736xx family of low-dropout (LDO) linear voltage regulators uses a new topology: an NMOS pass element in a voltage-follower configuration. This topology is stable using output capacitors with low ESR, an

SN74LVTH374DBRG4 : 3.3-v ABT Octal Buffers/drivers WITH 3-state Outputs

TPS7A7200RGWT : 2A, Single Output, Very Low Input, Configurable Fixed (0.9 To 5.0V) Low-Dropout Linear Regulator The TPS7A7200 low-dropout (LDO) voltage regulator is designed for applications seeking very-low dropout capability (180 mV at 2 A)) with an input voltage from 1.5 V to 6.5 V. The offers an innovative, u

SN74CB3Q3253PWRG4 : 10-bit FET BUS Switch 2.5v/3.3v LOW Voltage BUS Switch 5-V Tolerant Level Shifter

DS3680NE4 : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Driver Tube -10 V ~ -60 V; IC QUAD PHONE RELAY DRVR 14-DIP Specifications: Number of Drivers/Receivers: 4/0 ; Type: Driver ; Voltage - Supply: -10 V ~ -60 V ; Package / Case: 14-DIP (0.300", 7.62mm) ; Packaging: Tube ; Protocol: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ISOW7844DWE : DGTL ISO 5KV 4CH GEN PURP 16SOIC Texas Instruments' ISOW784x is a family of high-performance, quad-channel reinforced digital isolators with an integrated high-efficiency power converter. The integrated DC-DC converter provides up to 650 mW of isolated power at high efficiency and can be configured for various input and output v

0-C     D-L     M-R     S-Z