|Category||Semiconductors => Amplifiers => Operational Amplifiers (Op Amps) => Precision Op Amps|
|Part family||TLE2161A Excalibur JFET-Input High-Output-Drive uPower Operational Amplifier|
|Description||Excalibur JFET-Input High-Output-Drive uPower Operational Amplifier 8-SOIC 0 to 70|
|Company||Texas Instruments, Inc.|
|Datasheet||Download TLE2161A datasheet
|Operating Temperature Range(C)||0 to 70|
|Iq per channel(Typ)(mA)||0.29|
|Vn at 1kHz(Typ)(nV/rtHz)||40|
|Approx. Price (US$)||0.84 | 1ku|
|Iq per channel(Max)(mA)||0.35|
|Input Bias Current(Max)(pA)||60|
|Vos (Offset Voltage @ 25C)(Max)(mV)||1.5|
|Number of Channels(#)||1|
|Total Supply Voltage(Min)(+5V=5, +/-5V=10)||7|
|Total Supply Voltage(Max)(+5V=5, +/-5V=10)||36|
|Rail-to-Rail||In to V+|
|Pin nb||Package type||Ind std||JEDEC code||Package qty||Carrier||Device mark||Width (mm)||Length (mm)||Thick (mm)||Pitch (mm)|
|• TLE2161 EMI Immunity Performance | Doc|
|TLE2161, TLE2161A, TLE2161B PSpice Model - ZIP (01/10/2002)|
|TLE2161A, TLE2161B EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE µPOWER OPERATIONAL AMPLIFIERS
Excellent Output Drive Capability 2.5 V Min 100 , VCC± 12.5 V Min 600 , VCC± 15 V Low Supply Current. 280 µA Typ Decompensated for High Slew Rate and Gain-Bandwidth Product AVD = 0.5 Min Slew Rate = 10 V/µs Typ Gain-Bandwidth Product = 6.5 MHz Typ
Wide Operating Supply Voltage Range VCC 18 V High Open-Loop Gain. 280 V/mV Typ Low Offset Voltage. 500 µV Max Low Offset Voltage Drift With Time 0.04 µV/Month Typ Low Input Bias Current. 5 pA Typdescription
The TLE2161, TLE2161A, and TLE2161B are JFET-input, low-power, precision operational amplifiers manufactured using the Texas Instruments Excalibur process. Decompensated for stability with a minimum closed-loop gain of 5, these devices combine outstanding output drive capability with low power consumption, excellent dc precision, and high gain-bandwidth product. In addition to maintaining the traditional JFET advantages of fast slew rates and low input bias and offset currents, the Excalibur process offers outstanding parametric stability over time and temperature. This results in a device that remains precise even with changes in temperature and over years of use.MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs LOAD RESISTANCE
AVAILABLE OPTIONS PACKAGE to 125°C VIOmax 3 mV SMALL OUTLINE (D) TLE2161AMD TLE2161MD CHIP CARRIER (FK) TLE2161AMFK TLE2161MFK CERAMIC DIP (JG) TLE2161AMJG TLE2161MJG PLASTIC DIP (P) TLE2161AMP TLE2161MPThe D packages are available taped and reeled. Add R suffix to device type (e.g., TLE2161ACDR).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.TLE2161A, TLE2161B EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE µPOWER OPERATIONAL AMPLIFIERS
A variety of available options includes small-outline packages and chip-carrier versions for high-density system applications. The C-suffix devices are characterized for operation from to 70°C. The I-suffix devices are characterized for operation from to 85°C. The M-suffix devices are characterized for operation over the full military temperature range to 125°C.D, JG, OR P PACKAGE (TOP VIEW) FK PACKAGE (TOP VIEW)
TLE2161A, TLE2161B EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE µPOWER OPERATIONAL AMPLIFIERS
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VCC + (see Note 19 V Supply voltage, VCC 19 V Differential input voltage, VID (see Note 38 V Input voltage range, VI (any input). VCC ± Input current, II (each input). 1 mA Output current, IO. 80 mA Total current into VCC 80 mA Total current out of VCC 80 mA Duration of short-circuit current at (or below) 25°C (see Note 3). unlimited Continuous total power dissipation. See Dissipation Rating Table Operating free-air temperature range, TA: C suffix. 70°C I suffix. 85°C M suffix. to 125°C Storage temperature range, Tstg. to 150°C Case temperature for 60 seconds: FK package. 260°C Lead temperature mm (1/16 inch) from case for 10 seconds: or P package. 260°C Lead temperature mm (1/16 inch) from case for 60seconds: JG package. 300°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC and VCC 2. Differential voltages are at IN+ with respect IN 3. The output may be shorted to either supply. Temperature and /or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. DISSIPATION RATING TABLE PACKAGE TA 25°C POWER RATING 1000 mW DERATING FACTOR ABOVE 25°C 5.8 mW/°C 11.0 mW/°C 8.4 mW/°C 8.0 mW/°C = 70°C POWER RATING = 85°C POWER RATING = 125°C POWER RATING 200 mW
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|TLE2161AC Excalibur JFET, Input High Output Drive op Amp|
|TLE2161ACD ti TLE2161A, Excalibur JFET-input High-output-drive Upower Operational Amplifier|
|TLE2161AI Excalibur JFET, Input High Output Drive op Amp|
|TLE2161AID ti TLE2161A, Excalibur JFET-input High-output-drive Upower Operational Amplifier|
|TLE2161AM Excalibur JFET, Input High Output Drive op Amp|
|TLE2161AMD Excalibur JFET-input High-output-drive Mpower Operational Amplifiers|
|TLE2161AMFKB ti TLE2161A, Excalibur JFET-input High-output-drive Upower Operational Amplifier|
|TLE2161AMJG Excalibur JFET-input High-output-drive Mpower Operational Amplifiers|
|TLE2161AMJGB ti TLE2161A, Excalibur JFET-input High-output-drive Upower Operational Amplifier|
|TLE2161AMP Excalibur JFET-input High-output-drive Mpower Operational Amplifiers|
|TLE2161B Excalibur JFET, Input High Output Drive op Amp|
|TLE2161BCP ti TLE2161B, Excalibur JFET-input High-output-drive Upower Operational Amplifier|
|TLE2161BI Excalibur JFET, Input High Output Drive op Amp|
|TLE2161BIP ti TLE2161B, Excalibur JFET-input High-output-drive Upower Operational Amplifier|
|TLE2161BM Excalibur JFET, Input High Output Drive op Amp|
|TLE2161BMFKB ti TLE2161B, Excalibur JFET-input High-output-drive Upower Operational Amplifier|
|TLE2161C Excalibur JFET, Input High Output Drive op Amp|
|TLE2161CD ti TLE2161, JFET-input High-output-drive Low-power Decompensated Operational Amplifier|
|TLE2161I Excalibur JFET, Input High Output Drive op Amp|
|TLE2161ID ti TLE2161, JFET-input High-output-drive Low-power Decompensated Operational Amplifier|
|TLE2161M Excalibur JFET, Input High Output Drive op Amp|
CD74HCT4052SM : High Speed CMOS Logic Analog Multiplexers/demultiplexers
SN74LV20APWR : ti SN74LV20A, Dual 4-Input Positive-nand Gate
SN74LV32DR : ti SN74LV32, Quadruple 2-Input Positive-OR GATE
TAS5112ADFD : TAS5112A: Digital Amplifier Power Stage
UC3842ADW : Current Mode ti UC3842A, Current Mode PWM Controller
SN65HVD379DG4 : HIGH Output Full-duplex Rs-485 Drivers AND Receivers
OPA344NA/250G4 : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) General Purpose Tape & Reel (TR) 150µA 2.5 V ~ 5.5 V; IC OPAMP GP R-R 1MHZ SGL SOT23-5 Specifications: Packaging: Tape & Reel (TR) ; Amplifier Type: General Purpose ; Number of Circuits: 1 ; Package / Case: SC-74A, SOT-753 ; Slew Rate: 0.8 V/µs ; Gain Bandwidth Product: 1MHz ; Current - Supply: 150µA ; Current - Output / Channel: 15mA ; Voltage - Supply, Single/Dual (±): 2.5 V ~ 5
SN74LS161ANSRE4 : ti SN74LS161A, Synchronous 4-Bit Binary Counters
COP8SAB520M8XXX : 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PDSO20 Specifications: Life Cycle Stage: ACTIVE ; Clock Speed: 10 MHz ; ROM Type: MROM ; Supply Voltage: 4.5 to 5.5 volts ; I/O Ports: 16 ; Package Type: SOIC, Other, SOIC-20 ; Operating Range: Auto ; Pin Count: 20 ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Features: PWM
ALD2301 : Dual CMOS Voltage Comparator With Open Drain Driver. DUAL PRECISION CMOS VOLTAGE COMPARATOR WITH OPEN DRAIN DRIVER GENERAL The is a monolithic high performance dual voltage comparator built with advanced silicon gate CMOS technology. It very high typical input impedance 12 ; low input bias current of 10pA; fast response time of 300ns; very low power dissipation 55 µA per comparator; and single +5V or dual.
E818AHF : Octal 18v Pin Electronics Driver/window Comparator. The is an octal pin electronics driver and window comparator fabricated in a wide voltage CMOS process. It is designed specifically for Test During Burn In (TDBI) applications, where cost, functional density, and power are all at a premium. The Edge818 incorporates eight channels of programmable drivers and window comparators into one mm 100 pin MQFP.
HA-2841 : 50MHz, Fast Settling, Unity Gain Stable, Video Operational Amplifier FN2843.3.
KH561 : 215MHz, Adjustable Rout, Hybrid op Amp. The is a wideband DC coupled, amplifier that combines high output drive and low distortion. At an output +24dBm (10Vpp into 50), the -3dB bandwidth 150MHz. As illustrated in the table below, distortion performance remains excellent even when amplifying high-frequency signals to high output power levels. With the output current internally limited to 250mA,.
LM148FKB : ti LM148, Quad General-purpose Operational Amplifier. (per amplifier) Low Input Offset Voltage Low Input Offset Current Class AB Output Stage Input/Output Overload Protection Designed to Be Interchangeable With Industry Standard LM148, LM248, and LM348 The LM148, LM248, and LM348 are quadruple, independent, high-gain, internally compensated operational amplifiers designed to have operating characteristics.
LTC1540C : Nanopower Comparator With Reference. The LTC is an ultralow power, single comparator with built-in reference. The comparator's include less than 0.6µA supply current over the commercial temperature range, ± 2% reference, programmable hysteresis and TTL/CMOS outputs that sink and source current. The reference output can drive a bypass capacitor to 0.01µF without oscillation. The comparator.
PAC221TFQR : P/active Emi/rfitapped Filter.
SAA7199B : SAA7199B; Digital Video Encoder (DENC) Genlock-capable. Product Supersedes data of April 1993 File under Integrated Circuits, IC22 1996 Sep 27 Monolithic integrated CMOS video encoder circuit Standard MPU (12 lines) and I2C-bus interfaces for controls Three 8-bit signal inputs to PD0 for RGB respectively YUV or indexed colour signals (Tables to 26) Square pixel and CCIR input data rates Band limited composite.
TK15409 : 75 Ohm Video Line Driver. s Internal Y-C Summing Circuit s Voltage Gain 6 dB Fixed s Internal 75 Driver s Active High ON/OFF Control s Very Low Standby Current (typ. ISTBY 25 µA) s Very Small Output Capacitor Using SAG Function Pin s Very Small Package (SOT23L-8) s Single +5 V Power Supply Operation APPLICATIONS Video Equipment Digital Cameras CCD Cameras TV Monitors Video Tape.
TLV2465 : Family of Low-power Rail-to-rail Input/output op Amps With Shutdown. TLV2465, TLV246xA FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS WITH SHUTDOWN Rail-to-Rail Output Swing Gain Bandwidth Product. 6.4 MHz 80 mA Output Drive Capability Supply Current. 500 µA/channel Input Offset Voltage. 100 µV Input Noise Voltage. 11 nV/Hz Slew Rate. 1.6 V/µs Micropower Shutdown Mode (TLV2460/3/5). 0.3 µA/Channel.
TLV2473 : Family of 600-ma/ch 2.8-mhz Rail-to-rail Input/output High-drive op Amps With Shutdown.
TMS44400DGA : 1048576-word BY 4-bit Dynamic Random-access Memories. Organization. Single 5-V Power Supply for P 10% Tolerance) Single 3.3-V Power Supply for P 10% Tolerance) Low Power Dissipation ( TMS46400P only) 200-µA CMOS Standby 200-µA Self Refresh 300-µA Extended-Refresh Battery Backup Performance Ranges: ACCESS READ TIME OR WRITE (tRAC) (tCAC) (tAA) CYCLE (MAX) (MIN) 150 ns Enhanced Page-Mode Operation for Faster.
UPC4250 : Programmable Operational Amplifier.
V53C318165A50 : 3.3 Volt 1m X 16 Edo Page Mode CMOS Dynamic RAM. Max. RAS Access Time, (tRAC) Max. Column Address Access Time, (tCAA) Min. Extended Data Out Page Mode Cycle Time, (tPC) Min. Read/Write Cycle Time, (tRC) x 16-bit organization s EDO Page Mode for a sustained data rate of 50 MHz s RAS access time: ns s Dual CAS Inputs s Low power dissipation s Read-Modify-Write, RAS-Only Refresh, CAS-Before-RAS Refresh,.
ADG2128 : I2C CMOS 8 X 12 Analog Switch Array with Dual/Single Supplies The ADG2128 is an analog crosspoint switch with an array size of 8 x 12. The switch array is arranged such that there are 8 columns by 12 rows, in total 96 switch channels. The array is bidirectional, so the rows and columns may be configured as either inputs or outputs. Each of the 96 switches.
UPG2151T5K : L, S-Band SPDT Switch The μPG2151T5K is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed for mobile phone and another L, S-band application. This device can operate 2 control switching by control voltage 1.8 to 5.3 V. This device can operate frequency from 0.05 to 3.0 GHz, having the low insertion loss and high.
LMP2231 : Single Micropower, 1.8V, Precision Operational Amplifier With CMOS Inputs From The PowerWise® Family The LMP2231 is a single micropower precision amplifier designed for battery powered applications. The 1.8V to 5.0V guaranteed supply voltage range and quiescent power consumption of only 18 W extend the battery life in portable battery operated systems.