|Category||Semiconductors => Amplifiers => Operational Amplifiers (Op Amps) => Precision Op Amps|
|Part family||TLV2775 Quad 2.7-V High-Slew-Rate Rail-to-Rail Output Operational Amplifier w/Shutdown|
|Description||Quad 2.7-V High-Slew-Rate Rail-to-Rail Output Operational Amplifier w/Shutdown 16-PDIP 0 to 70|
|Company||Texas Instruments, Inc.|
|Datasheet||Download TLV2775 datasheet
|Cross ref.||Similar parts: MC33204, LMV825AIPT, LMV825IPT, AD8594AR, AD8594AR-REEL, AD8594AR-REEL7, AD8594ARU, AD8594ARU-REEL, AD8594ARZ, AD8594ARZ-REEL|
|Iq per channel(Max)(mA)||2|
|Total Supply Voltage(Min)(+5V=5, +/-5V=10)||2.5|
|Approx. Price (US$)||1.57 | 1ku|
|Iq per channel(Typ)(mA)||1|
|Number of Channels(#)||4|
|Input Bias Current(Max)(pA)||60|
|Total Supply Voltage(Max)(+5V=5, +/-5V=10)||5.5|
|Vn at 1kHz(Typ)(nV/rtHz)||17|
|Vos (Offset Voltage @ 25C)(Max)(mV)||2.5|
|Operating Temperature Range(C)||-40 to 125,0 to 70|
|Rail-to-Rail||In to V-,Out|
|Pin nb||Package type||Ind std||JEDEC code||Package qty||Carrier||Device mark||Width (mm)||Length (mm)||Thick (mm)||Pitch (mm)|
|• TLV277x/TLV277xA EMI Immunity Performance | Doc|
|• Use of Rail-to-Rail Operational Amplifiers (Rev. A)
This application report assists design engineers to understand the functionality and benefits of rail-to-rail operational amplifiers. It shows simplified schematics, functions, and characteristics of the input and output stages. Typical application schemat | Doc
|OPAMPEVM: Universal Operational Amplifier Evaluation Module|
|TLV277xA PSpice 5V Supply Voltage Model - ZIP (05/02/2000)|
TLV277x, TLV277xA FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS WITH SHUTDOWN
High Slew Rate. 10.5 V/µs Typ High-Gain Bandwidth. 5.1 MHz Typ Supply Voltage Range 5.5 V Rail-to-Rail Output 360 µV Input Offset Voltage Low Distortion Driving 600- 0.005% THD+N 1 mA Supply Current (Per Channel) 17 nV/Hz Input Noise Voltage
2 pA Input Bias Current Characterized From to 125°C Available in MSOP and SOT-23 Packages Micropower Shutdown Mode. IDD 1 µA Available in Q-Temp Automotive High Reliability Automotive Applications Configuration Control / Print Support Qualification to Automotive Standardsdescription
The TLV277x CMOS operational amplifier family combines high slew rate and bandwidth, rail-to-rail output swing, high output drive, and excellent dc precision. The device provides 10.5 V/µs of slew rate and 5.1 MHz of bandwidth while only consuming mA of supply current per channel. This ac performance is much higher than current competitive CMOS amplifiers. The rail-to-rail output swing and high output drive make these devices a good choice for driving the analog input or reference of analog-to-digital converters. These devices also have low distortion while driving a 600- load for use in telecom systems. These amplifiers have a 360-µV input offset voltage, a 17 nV/Hz input noise voltage, and a 2-pA input bias current for measurement, medical, and industrial applications. The TLV277x family is also specified across an extended temperature range to 125°C), making it useful for automotive systems, and the military temperature range to 125°C), for military systems. These devices operate from to 5.5-V single supply voltage and are characterized 2.7 V and 5 V. The single-supply operation and low power consumption make these devices a good solution for portable applications. The following table lists the packages available.
FAMILY PACKAGE TABLE DEVICE TLV2774 TLV2775 NUMBER OF CHANNELS PACKAGE TYPES SHUTDOWN PDIP CDIP 8 SOIC SOT-23 5 TSSOP 14 16 MSOP 8 10 LCCC 20 CPAK 10 Yes Refer to the EVM Selection Guide (Lit# SLOU060) UNIVERSAL EVM BOARD
A SELECTION OF SINGLE-SUPPLY OPERATIONAL AMPLIFIER PRODUCTS DEVICE TLV247X TLV245X VDD (V) BW (MHz) SLEW RATE (V/µs) IDD (per channel) (µA) RAIL-TO-RAIL O I/O
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
This document contains information on products in more than one phase of development. The status of each device is indicated on the page(s) specifying its electrical characteristics.
TLV2770 and TLV2771 AVAILABLE OPTIONS to 70°C VIOmax AT 25°C (mV) 125°C 1.6 PACKAGED DEVICES SMALL OUTLINE (D) TLV2771AID SOT-23 (DBV) TLV2771CDBV TLV2771IDBV MSOP (DGK) TLV2770CDGK TLV2770IDGK PLASTIC DIP (P) TLV2770IP TLV2770AIP
This device is in the Product Preview stage of development. Please contact your local TI sales office for availability. TLV2772 and TLV2773 AVAILABLE OPTIONS to 70°C VIOmax AT 25°C (mV) 125°C 1.6 PACKAGED DEVICES SMALL OUTLINE (D) TLV2772AID TLV2773AID MSOP (DGK) TLV2772CDGK TLV2772IDGK MSOP (DGS) TLV2773CDGS TLV2773IDGS PLASTIC DIP (N) TLV2773IN TLV2773AIN PLASTIC DIP (P) TLV2772IP TLV2772AIP
TLV2774 and TLV2775 AVAILABLE OPTIONS to 70°C VIOmax AT 25°C (mV) 125°C 2.1 PACKAGED DEVICES SMALL OUTLINE (D) TLV2774AID TLV2775AID PLASTIC DIP (N) TLV2775IN TLV2775AIN PLASTIC DIP (P) TLV2774IP TLV2774AIP TSSOP (PW) TLV2774AIPW TLV2775AIPW
TLV2772M/Q AND TLV2772AM/Q AVAILABLE OPTIONS PACKAGED DEVICES TA VIOmax AT 25°C (mV) SMALL OUTLINE (D) TLV2772MD TLV2772AMD CHIP CARRIER (FK) TLV2772MFK TLV2772AMFK CERAMIC DIP (JG) TLV2772MJG TLV2772AMJG CERAMIC FLATPACK (U) TLV2772MU TLV2772AMU TSSOP (PW) TLV2772QPW TLV2772AQPW
PACKAGE SYMBOLS PACKAGE TYPE SOT23 PINS 5 Pin PART NUMBER TLV2770CDGK 8 Pin MSOP 10 Pin xx represents the device date code. TLV2773CDGS TLV2773IDGS SYMBOL VAMC VAMI xxTIABO xxTIABP xxTIAAF xxTIAAG xxTIABQ xxTIABR
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|TLV2775AID ti TLV2775A, Quad 2.7-V High-slew-rate Rail-to-rail Output Operational Amplifier W/shutdown|
|TLV2775CD ti TLV2775, Quad 2.7-V High-slew-rate Rail-to-rail Output Operational Amplifier W/shutdown|
|TLV2775ID ti TLV2775, Quad 2.7-V High-slew-rate Rail-to-rail Output Operational Amplifier W/shutdown|
|TLV2780 Family of 1.8 V High-speed Rail-to-rail Input/output Bl- op Amps With Shutdown|
|TLV2780AID ti TLV2780A, Single 1.8V Rrio, 8MHz Amplifier With Shutdown|
|TLV2780CD ti TLV2780, Single 1.8V Rrio, 8MHz Amplifier With Shutdown|
|TLV2780CDBV Family of 1.8 V High-speed Rail-to-rail Input/output Operational Amplifiers With Shutdown|
|TLV2780CDBVR ti TLV2780, Single 1.8V Rrio, 8MHz Amplifier With Shutdown|
|TLV2780IDBV Family of 1.8 V High-speed Rail-to-rail Input/output Operational Amplifiers With Shutdown|
|TLV2780IDBVR ti TLV2780, Single 1.8V Rrio, 8MHz Amplifier With Shutdown|
|TLV2781 Family of 1.8 V High-speed Rail-to-rail Input/output Bl- op Amps With Shutdown|
|TLV2781AID ti TLV2781A, Single 1.8V Rrio, 8MHz Amplifier|
|TLV2781CD ti TLV2781, Single 1.8V Rrio, 8MHz Amplifier|
|TLV2781CDBV Family of 1.8 V High-speed Rail-to-rail Input/output Operational Amplifiers With Shutdown|
CD74HC123E : Monostable Multivibrators ti CD74HC123, High Speed CMOS Logic Dual Retriggerable Monostable Multivibrators With Reset
SN74AVC16373DGG : 16-bit Transparent D-type Latch With 3-state Outputs
SN74F00N : ti SN74F00, Quad 2-input Positive-nand Gates
UC2836D : Controllers ti UC2836, High Efficiency Regulator Controller
SN74LVC863APWRE4 : 32-bit BUS Transceiver WITH 3-state Outputs
UCC3927 : High-voltage Hot-swap Power Manager
AC74 : DUAL Positive-edge-triggered D-type Flip-flops WITH Clear AND Preset
TPS2819-EP : Single-channel High-speed Mosfet Driver
LM3S9B90-IBZ80-C5T : Embedded - Microcontroller Integrated Circuit (ics) Internal Tray 1.08 V ~ 1.32 V; IC ARM CORTEX MCU 256KB 108NFBGA Specifications: Program Memory Size: 256KB (256K x 8) ; RAM Size: 96K x 8 ; Number of I /O: 60 ; Package / Case: 108-LFBGA ; Speed: 80MHz ; Oscillator Type: Internal ; Packaging: Tray ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: ARM® Cortex-M3™ ; Data Converters: A/D 16x10b ; Core
TPS3780CDBVR : Supervisory Circuits Low Power, Dual Voltage Detector in Small ?SON package 6-SOT-23 -40 to 125 Texas Instruments TPS37xx Low-Power High-Accuracy Voltage Detectors are two-channel voltage detectors with low-power and small solution size. The SENSE1 and SENSE2 inputs include hysteresis to reject brief glitches, ensuring stable output operation without false triggering. These devices have adj
5962-8962101XA : High Speed Operational Amplifier. The LM6161 family of high-speed amplifiers exhibits an excellent speed-power product in delivering 300 V/µs and 50 MHz unity gain stability with only mA of supply current. Further power savings and application convenience are possible by taking advantage of the wide dynamic range in operating supply voltage which extends all the way down to +5V. These.
ADG417 : 25 Ohm, Single SPST Switch (DG417 Replacement). 44 V Supply Maximum Ratings SS to VDD Analog Signal Range Low On Resistance (<35 ) Ultralow Power Dissipation (<35 W) Fast Switching Times tON (160 ns max) tOFF (100 ns max) Break-Before-Make Switching Action Plug-In Replacement for DG417 APPLICATIONS Precision Test Equipment Precision Instrumentation Battery Powered Systems Sample Hold Systems.
CVA2419TX : Triple 85mhz CRT Driver. The CVA2419TX contains three wide bandwidth, large signal amplifiers designed specially to drive high resolution color monitors. This device will provide excellent drive capability for the x 1024 and x 768 color monitor. The is a low cost CRT driver designed to replace discrete solutions. The part is housed in the industry standard 11-lead TO-220 molded.
HI-3182 : Arinc 429 Differential Line Driver. The HI-3186, HI-3187 and HI-3188 bus interface products are silicon gate CMOS devices designed as a line driver in accordance with the ARINC 429 bus s. In addition to being functional upgrades of Holt's & HI-8383 products, they are also alternate sources for the HS-3182 ( Intersil/Harris), the RM3182 (Fairchild /Raytheon) and a variety of similar DEI/DDC.
HT9202A : 1-memory/2-memory Tone/pulse Dialer.
ICL3221E : +/-15kV Esd Protected, +3V to +5.5V, 1Microamp, 250kbps, RS-232 Transmitters/receivers.
LC8904Q : Digital Audio Interface Receiver. The LC8904Q demodulates data transmitted between digital audio equipment in the EIAJ format to a normal format signal synchronized with the receiving side input signal. Synchronizes with the transmitted EIAJ format signal using a built-in PLL circuit. Modes are set up and codes are output according to commands sent over a microprocessor interface. Input.
LM4930 : Audio Subsystem With Stereo Headphone & Mono Speaker Amplifiers. LM4930 Audio Subsystem with Stereo Headphone & Mono Speaker Amplifiers The is an integrated audio subsystem that supports voice and digital audio functions. The LM4930 includes a high quality I2S input stereo DAC, a voice band codec, a stereo headphone amplifier and a high-power mono speaker amplifier. It is primarily designed for demanding applications.
MAX2510 : Low-voltage if Transceiver With Limiter/rssi And Quadrature Modulator.
MAX457 : Dual, 70MHz Video Amplifier.
MSC2313258D-XXBS2 : 1,048,576-word X 32-bit Dynamic RAM Module : Fast Page Mode Type With Edo.
NE321000 : C to ka Band Super Low Noise Amplifier N-channel Hj-FET Chip. to Ka BAND SUPER LOW NOISE AMPLIFIER N-CHANNEL HJ-FET CHIP The NE321000 is Hetero Junction FET that utilizes the hetero junction to create high mobility electrons. Its excellent low noise and associated gain make it suitable for DBS and another commercial systems, industrial and space applications. Super Low Noise Figure & High Associated Gain 0.35.
TDA8708B : Video Analog Input Interface. Product Supersedes data of June 1994 File under Integrated Circuits, IC02 1996 Nov 26 8-bit resolution Sampling rate to 32 MHz Binary or two's complement 3-state TTL outputs TTL-compatible digital inputs and outputs Internal reference voltage regulator Power dissipation 365 mW (typical) Input selector circuit (one out of three video inputs) Clamp and Automatic.
TEA5114A : Multiplexers. RGB Switching Circuit. 25MHz BANDWIDTH CROSSTALK : 55dB SHORT CIRCUIT TO GROUND OR VCC PROTECTED ANTI SATURATION GAIN CHANGING VIDEO SWITCHING PIN CONNECTIONS This integrated circuit provides RGB switching allowing connections between peri TV plug, internal RGB generator and video processor a TV set. The input signal black level is tied to the same reference voltage on each.
THS3202D : ti THS3202, 2GHz Current Feedback Amplifier. D Unity Gain Bandwidth: 2 GHz D High Slew Rate: 9000 V/µs at 120 MHz: 89 dBc 100 , The THS3202 is part of the high performing current feedback amplifier family developed in BiCOM technology. Designed for low-distortion with a high slew rate of 9000 V/µs, the THS320x family is ideally suited for applications driving loads sensitive to distortion at high.
TLV2361CDBV : ti TLV2361, Single High-Performance, Low-voltage Operational Amplifier.
TLV2473A : . TLV2475, TLV247xA FAMILY 600-µA/Ch 2.8-MHz RAIL-TO-RAIL INPUT/OUTPUT HIGH-DRIVE OPERATIONAL AMPLIFIERS WITH SHUTDOWN CMOS Rail-To-Rail Input/Output Input Bias Current. 2.5 pA Low Supply Current. 600 µA/Channel Ultra-Low Power Shutdown Mode IDD(SHDN). 350 nA/ch 3 V IDD(SHDN). 1000 nA/ch 5 V Gain-Bandwidth Product. 2.8 MHz High Output Drive Capability.
TLV2770CD : ti TLV2770, Single 2.7-V High-slew-rate Rail-to-rail Output Operational Amplifier W/shutdown.
TPA6101A2 : . TPA6101A2 50-mW ULTRALOW-VOLTAGE, FIXED-GAIN STEREO HEADPHONE AUDIO POWER AMPLIFIER Minimal External Components Required to 3.6 Supply Voltage Range 50-mW Stereo Output Low Supply Current. 0.75 mA Low Shutdown Current. 50 nA Gain Set Internally 2 dB Pop Reduction Circuitry Internal Mid-Rail Generation Thermal and Short-Circuit Protection Surface-Mount.
MAX4983E : High-Speed USB 2.0 Switches With ±15kV ESD The MAX4983E/MAX4984E are high ESD-protected analog switches that combine the low on-capacitance and low on-resistance necessary for high-performance switching applications. COM1 and COM2 are protected against ±15kV ESD without latchup or damage. The devices are ideal for USB 2.0 high-speed applications at 480Mbps.