Details, datasheet, quote on part number: TLV27L2CD
PartTLV27L2CD
CategoryAnalog & Mixed-Signal Processing => Amplifiers => Operational Amplifiers
Descriptionti TLV27L2, 11-uA/Channel, 160kHz, Rr-out Dual op Amp
CompanyTexas Instruments, Inc.
DatasheetDownload TLV27L2CD datasheet
Quote
Find where to buy
 
  

 

Features, Applications

FAMILY OF MICROPOWER RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS

FEATURES D BiMOS Rail-to-Rail Output D Input Bias Current. pA D High Wide Bandwidth. 160 kHz D High Slew Rate. 0.1 V/s D Supply Current. 7 A (per channel) D Input Noise Voltage. 89 nV/Hz D Supply Voltage Range. V D Specified Temperature Range D DESCRIPTION

The TLV27Lx single supply operational amplifiers provide rail-to-rail output capability. The TLV27Lx takes the minimum operating supply voltage down 2.7 V over the extended industrial temperature range, while adding the rail-to-rail output swing feature. The TLV27Lx also provides 160-kHz bandwidth from only 7 A. The maximum recommended supply voltage 16 V, which allows the devices to be operated from (8-V supplies down 1.35 V) two rechargeable cells. The rail-to-rail outputs make the TLV27Lx good upgrades for the TLC27Lx family--offering more bandwidth at a lower quiescent current. The TLV27Lx offset voltage is equal to that of the TLC27LxA variant. Their cost effectiveness makes them a good alternative to the TLC/V225x, where offset and noise are not of premium importance. The TLV27L1/2 are available in the commercial temperature range to enable easy migration from the equivalent TLC27Lx. The TLV27L1 is not available with the power saving/performance boosting programmable pin 8. The TLV27L1 is available in the small SOT-23 package --something the TLC27(L)1 was not--enabling performance boosting in a smaller package. The TLV27L2 is available in the x 5mm MSOP, providing PCB area savings over the 8-pin SOIC and 8-pin TSSOP.

to 125C. Industrial Grade to 70C. Commercial Grade Ultra-Small Packaging 5 Pin SOT-23 (TLV27L1)

APPLICATIONS D Portable Medical D Power Monitoring D Low Power Security Detection Systems D Smoke Detectors

NOTE: All dc specs are maximums while ac specs are typicals.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

PACKAGE/ORDERING INFORMATION PRODUCT PACKAGE CODE D DBV D DBV D SYMBOL SPECIFIED TEMPERATURE RANGE ORDER NUMBER to 70C VBIC to 125C VBII TLV27L2ID TLV27L2IDR Tape and Reel Tube Tape and Reel Tube Tape and Reel Tape and Reel Tube Tape and Reel TRANSPORT MEDIA Tube Tape and Reel

absolute maximum ratings over operating free-air temperature (unless otherwise noted)

Supply voltage, VS. 16.5 V Input voltage, VI (see Note 1). VS Output current, IO. 100 mA Differential input voltage, VID. VS Continuous total power dissipation. See Dissipation Rating Table Maximum junction temperature, TJ. 150C Operating free-air temperature range, TA: C suffix. 70C I suffix. to 125C Storage temperature range, Tstg. to 125C Lead temperature mm (1/16 inch) from case for 10 seconds. 300C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: Relative to GND pin. DISSIPATION RATING TABLE PACKAGE D (8) DBV (5) DBV (6) JC (C/W) 55 JA (C/W) TA 25C POWER RATING = 85C POWER RATING 221 mW

MIN Dual supply Supply voltage, (VS) Input common-mode voltage range C-suffix Operating free-air temperature, TA I-suffix Single supply MAX 70 125 UNIT V C

electrical characteristics at recommended operating conditions, 5 V, and 10 V (unless otherwise noted)

PARAMETER VIO CMRR Input offset voltage Offset voltage drift Common-mode rejection ratio TEST CONDITIONS VIC TA 25C Full range 25C Full range V 25C Full range 25C Full range 86 dB MIN TYP 0.5 MAX 7 mV V/C UNIT

PARAMETER TEST CONDITIONS 25C 70C VIC 100 k, IIB ri(d) CIC Input bias current Differential input resistance Common-mode input capacitance = 1 kHz 8 1 MIN TYP 1 MAX pF pA UNIT

PARAMETER IQ PSRR Quiescent current (per channel) Power supply rejection ratio (VS/VIO) TEST CONDITIONS 16 V, VIC V No load, TA 25C Full range 25C Full range 82 dB MIN TYP 7 MAX 11 16 UNIT A


 

Related products with the same datasheet
TLV27L2CDGK
TLV27L2CDGKR
TLV27L2CDR
TLV27L2ID
TLV27L2IDGK
TLV27L2IDGKR
TLV27L2IDR
TLV27L2CDGKG4
TLV27L2CDGKRG4
TLV27L2IDGKG4
TLV27L2IDGKRG4
Some Part number from the same manufacture Texas Instruments, Inc.
TLV27L2CDGK ti TLV27L2, 11-uA/Channel, 160kHz, Rr-out Dual op Amp
TLV27X
TLV3011 Low Power Open Drain Output Comparator With Voltage Reference
TLV3012 Nanopower, 1.8V, SOT23 Push-pull Comparator With Voltage Reference
TLV320AC36 3v Voice-band Audio Processors Vbap(tm)
TLV320AC36CDW ti TLV320AC36, Voice-band Audio Processor
TLV320AC37 3v Voice-band Audio Processors Vbap(tm)
TLV320AC37CDW ti TLV320AC37, Voice-band Audio Processor
TLV320AC40 3v Voice-band Audio Processors (vbap)
TLV320AC40CDW ti TLV320AC40, 3-V Voice-band Audio Processors
TLV320AC41 3v Voice-band Audio Processors (vbap)
TLV320AC41CDW ti TLV320AC41, 3-V Voice-band Audio Processors
TLV320AC56 3v Voice-band Audio Processors (vbap)
TLV320AC56CDW ti TLV320AC56, 3-V Voice-band Audio Processors
TLV320AC56DW 3-v Voice-band Audio Processors Vbape
TLV320AC57 ti TLV320AC57, 3-V Voice-band Audio Processors
TLV320AC57DW 3-v Voice-band Audio Processors Vbape
TLV320AD11A 3.3v Integrated Adsl Over Pots Codec
TLV320AD11APZ ti TLV320AD11A, 3.3V Integrated Adsl Codec For Cpe
TLV320AD12A 3.3-v Integrated Adsl Codec
TLV320AD13A

5962-9688101QPA : ti TLV2352, Dual Low Voltage LinCMOS(TM) Differential Comparator

CD4527BPWR : Drivers/Multipliers ti CD4527B, CMOS BCD Rate Multiplier

SN74LS377N3 : D-Type Flip-Flops ti SN74LS377, Octal D-type Flip-flops With Clock Enable

TLV1549 : 10-bit Analog-to-digital Converter With Serial Control

TPS77725DR : ti TPS77725, Fast-transient-response 750-mA LDO Voltage Regs

UCC3808APWTR-1 : 1 - Low-power Current-mode Push-pull PWM

TMS320C6211GLWA100 : Fixed/floating-point DSP

TPPM0302DGNRG4 : ti TPPM0302, Single-output 400mA, 3.3V Low-dropout (LDO) Regulator With Selectable 3.3V or Dual 5V Input & Pok

SN74HC259PWRG4 : ti SN74HC259, 8-Bit Addressable Latches

SN74AUP1G98DRYR : Low-power Configurable Multiple-function Gate

Same catergory

BBY25-S1 : Silicon Tuning Varactors ( Abrupt Junction Tuning Diode Tuning Range 120 V ).

DS1869 : 3V Dallastat Electronic Digital Rheostat. Replaces mechanical variable resistors Operates from or 5V supplies Electronic interface provided for digital as well as manual control Internal pull-ups with debounce for easy interfacing to mechanical push buttons Wiper position is maintained in the absence of power Low cost alternative to mechanical controls Applications include volume, tone, contrast,.

HS-2400RH : Radiation Hardened Pram Four Channel Programmable Operational Amplifier.

LA6501 : Power Operational Amplifier. High output current (IO max=1.0A). High gain. With current limiter. Capable of being operated from single supply. s Parameter Maximum supply voltage Differential input voltage Common-mode input voltage Output current Allowable power dissipation Operating temperature Storage temperature Symbol VCC/VEE VIDIf VICOM IO max Pd max Topr Tstg Conditions Parameter.

LMV321DCK : Low-voltage Rail-to-rail Output Operational Amplifiers. LMV321 SINGLE, LMV358 DUAL, LMV324 QUAD LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS 2.7-V and 5-V Performance No Crossover Distortion Low Supply Current: 130 A Typ 210 A Typ 410 A Typ Rail-to-Rail Output Swing Package Options Include Plastic Small-Outline (D), Small-Outline Transistor (SOT-23 DBV, SC-70 DCK), and Thin Shrink Small-Outline.

LT6202 : LT6202, 100MHz, Ultralow 1.9nv/rtHz Noise, Low Power op Amp. LT6202/LT6203/LT6204 Single/Dual/Quad 100MHz, Rail-to-Rail Input and Output, Ultralow 1.9nV/Hz Noise, Low Power Op Amps Low Noise Voltage: 1.9nV/Hz (100kHz) Low Supply Current: 3mA/Amp Max Gain Bandwidth Product: 100MHz Dual LT6203 in Tiny DFN Package Low Distortion: at 1MHz Low Offset Voltage: 500V Max Wide Supply Range: to 12.6V Input Common Mode.

MAX4295EVKIT : MAX4295EVKIT Evaluation Kit For The MAX4295. The is a mono, switch-mode (Class-D) audio power amplifier intended for multimedia and generalpurpose high-power applications. It has greater than 87% efficiency and is capable of delivering 2W maximum continuous power a 4 load. The MAX4295 evaluation kit (EV kit) is a fully assembled and tested surface-mount board. The EV kit is designed to be driven.

MC03AX1456RT : Adsl Line Driver. The MC03AX1456 ADSL Line Driver provides a single chip analog front end to interface the ADSL Transceiver to the line transformer. The MC03AX1456CO is designed to fulfill the central office requirements. The MC03AX1456RT is optimized for use at the remote terminal (i.e. consumer premises). The ADSL Line Driver provides three differential ports: a transmit.

NTE285 : Silicon Complementary Transistors Audio Amplifier Output. Silicon Complementary Transistors Audio Amplifier Output : The NTE284 (NPN) and NTE285 (PNP) are silicon complementary power transistors a TO3 type package designed for use in power amplifier applications. Applications: D Recommended for 100W HighFidelity Audio Frequency Amplifier Output Stage Absolute Maximum Ratings: (TA = +25C unless otherwise.

OPA683ID : ti OPA683, Very Low Power Current Feedback Amplifier With Disable. Very Low-Power, Current Feedback OPERATIONAL AMPLIFIER With Disable REDUCED BANDWIDTH CHANGE VERSUS GAIN 150MHz BANDWIDTH > 90MHz BANDWIDTH TO GAIN > +10 LOW DISTORTION: at 5MHz HIGH OUTPUT CURRENT: 110mA SINGLE TO +12V SUPPLY OPERATION DUAL TO 6V SUPPLY OPERATION LOW SUPPLY CURRENT: 0.94mA LOW SHUTDOWN CURRENT: 100A APPLICATIONS LOW POWER BROADCAST.

SY100EL16VDKCTR : Enhanced Differential Receiver. 3.3V and 5V power supply options 250ps propagation delay Very high voltage gain vs. standard or EL16V Ideal for Pulse Amplifier and Limiting Amplifier applications Data synchronous Enable/Disable (/EN) on QHG and /QHG provides for complete glitchless gating of the outputs Ideal for gating timing signals Complete solution for high quality, high frequency.

TA75324P : Quad Operational Amplifier.

TL3016CD : ti TL3016, Ultra-fast Low-power Precision Comparator. Ultrafast Operation. 7.6 ns (Typ) Low Positive Supply Current 10.6 mA (Typ) Operates From a Single 5-V Supply or From a Split 5-V Supply Complementary Outputs Low Offset Voltage No Minimum Slew Rate Requirement Output Latch Capability Functional Replacement to the LT1016 The is an ultrafast comparator designed to interface directly to TTL logic while.

TLC272Y : Lincmos Precision Dual Operational Amplifiers. 500 V Max at 25C, VDD 5 V Input Offset Voltage Drift. Typically 0.1 V/Month, Including the First 30 Days Wide Range of Supply Voltages Over Specified Temperature Range: 16 V Single-Supply Operation Common-Mode Input Voltage Range Extends Below the Negative Rail (C-Suffix, I-Suffix types) Low Noise. Typically 25 nV/Hz = 1 kHz Output Voltage Range.

TPS2103 : Switch/Driver Combo. V Aux Power-distribution Switches. typical applications Dual-Input, Single-Output MOSFET Switch With No Reverse Current Flow (No Parasitic Diodes) 250-m, 500-mA N-Channel; 14-A Supply Current 1.3-, 100-mA P-Channel; 0.75-A Supply Current (VAUX Mode) Advanced Switch Control Logic CMOS and TTL Compatible Enable Input Controlled Rise, Fall, and Transition Times 4 V Operating Range SOT-23-5.

UCC3941-5 : Power. 1v Synchronous Boost Converter. Ensured Under Full Load on Main Output With Operation Down 0.4 V Input Voltage Range V to VOUT V 500-mW Output Power at Battery Voltages as Low 0.8 V Secondary 9-V Supply From a Single Inductor Adjustable Output Power Limit Control Output Fully Disconnected in Shutdown Adaptive Current-Mode Control for Optimum Efficiency 8-A Shutdown Supply Current.

LMV651 : High-performance 12 MHz op amp National's LMV651 is a high performance, low power op amp IC implemented in National's advanced VIP50 process. The unity gain stable LMV651 12 MHz of bandwidth while consuming only 110 uA of current, an exceptional bandwidth to power ratio in this op amp class, and maintains stability for capacitive loads as large as 500 pF. The LMV651.

WM8602 : The WM8602 comprises a high performance stereo + sub PWM digital power amplifier controller. Simply by adding appropriate power output stages a 2.1 channel power amplifier may be built. Two identical full audio bandwidth channels, plus a reduced bandwidth sub channel are provided as PWM outputs..

 
0-C     D-L     M-R     S-Z