Details, datasheet, quote on part number: TLV320AC36IPT
PartTLV320AC36IPT
CategoryMultimedia => Audio => Codecs => Voice-Band Codecs
TitleVoice-Band Codecs
Descriptionti TLV320AC36, Voice-band Audio Processor
CompanyTexas Instruments, Inc.
DatasheetDownload TLV320AC36IPT datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Single 3-V Operation Low Power Consumption: Operating Mode. 20 mW Typ Standby Mode. 5 mW Typ Power-Down Mode. 2 mW Typ Combined A/D, D/A, and Filters Extended Variable-Frequency Operation Sample Rates to 16 kHz Pass-Band to 7.2 kHz Electret Microphone Bias Reference Voltage Available Drive a Piezo Speaker Directly Compatible With All Digital Signal Processors (DSPs)

Selectable Between 8-Bit Companded and 13-Bit (Dynamic Range) Linear Conversion: TLV320AC36. -Law and Linear Modes TLV320AC37. A-Law and Linear Modes Programmable Volume Control in Linear Mode 3.6 kHz Passband with Specified Master Clock Designed for Standard 2.048-MHz Master Clock for U.S. Analog, U.S. Digital, CT2, DECT, GSM, and PCS Standards for Hand-Held Battery-Powered Telephones

PDN EARA EARB EARGS VCC MICMUTE DCLKR DIN FSR EARMUTE
MICBIAS MICGS MICIN VMID GND LINSEL TSX/DCLKX DOUT FSX CLK
NC EARGS EARB EARA PDN MICBIAS MICGS MICIN NC

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. VBAP is a trademark of Texas Instruments Incorporated.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

description

The TLV320AC36 and TLV320AC37 voice-band audio processor (VBAP) integrated circuits are designed to perform the transmit encoding (A /D conversion) and receive decoding (D/A conversion) together with transmit and receive filtering for voice-band communications systems. Cellular telephone systems are targeted in particular; however, these integrated circuits can function in other systems including digital audio, telecommunications, and data acquisition. These devices are pin-selectable for either of two modes, companded and linear, providing data in two formats. In the companded mode, data is transmitted and received in 8-bit words. In the linear mode, 13 bits of data, and either three bits of gain-setting control data, or three zero bits of padding to create a16-bit word, are sent and received. The transmit section is designed to interface directly with an electret microphone element. The microphone input signal (MICIN) is buffered and amplified with provision for setting the amplifier gain to accommodate a range of signal input levels. The amplified signal is passed through antialiasing and band-pass filters. The filtered signal is then applied to the input of a compressing analog-to-digital converter (COADC) when companded mode is selected. Otherwise, the analog-to-digital converter performs a linear conversion. The resulting data is then clocked out of DOUT as a serial data stream. The receive section takes a frame of serial data on DIN and converts it to analog through an expanding digital-to-analog converter (EXDAC) when the companded mode is selected; otherwise, a linear conversion is performed. The analog signal then passes through switched capacitor filters, which provide out-of-band rejection, (sin x)/x correction functions, and smoothing. The filtered signal is sent to the earphone amplifier. The earphone amplifier has a differential output with adjustable gain and is designed to minimize static power dissipation. A single on-chip high-precision band-gap circuit generates all voltage references, eliminating the need for external reference voltages. An internal reference voltage equal to VCC /2, VMID, is used to develop the midlevel virtual ground for all the amplifier circuits and the microphone bias circuit. Another reference voltage, MICBIAS, can supply bias current for the microphone. The TLV320AC3xC devices are characterized for operation from to 70C. The TLV320AC3xI devices are characterized for operation from to 85C.

LINSEL 15 MICMUTE MICIN 6 18 Input Buffer Transmit Third-Order Antialias Transmit Sixth-Order Low Pass Transmit First-Order High Pass ADC Output Logic 13 DOUT

12 MICGS 19 256 kHz Band-Gap Voltage Reference A/D Converter Voltage Reference 256 kHz D/A Converter Voltage Reference 8 kHz Autozero 8 kHz

256 kHz 2 EARA 3 EARB 4 EARGS 10 EARMUTE Receive Buffer Receive Filter Input Logic

 

Related products with the same datasheet
TLV320AC36CDWR
TLV320AC36CN
TLV320AC36CPT
TLV320AC36IDW
TLV320AC36IDWR
TLV320AC36IPTR
Some Part number from the same manufacture Texas Instruments, Inc.
TLV320AC36IPTR ti TLV320AC36, Voice-band Audio Processor
TLV320AC37 3v Voice-band Audio Processors Vbap(tm)
TLV320AC37CDW ti TLV320AC37, Voice-band Audio Processor
TLV320AC40 3v Voice-band Audio Processors (vbap)
TLV320AC40CDW ti TLV320AC40, 3-V Voice-band Audio Processors
TLV320AC41 3v Voice-band Audio Processors (vbap)
TLV320AC41CDW ti TLV320AC41, 3-V Voice-band Audio Processors
TLV320AC56 3v Voice-band Audio Processors (vbap)
TLV320AC56CDW ti TLV320AC56, 3-V Voice-band Audio Processors
TLV320AC56DW 3-v Voice-band Audio Processors Vbape
TLV320AC57 ti TLV320AC57, 3-V Voice-band Audio Processors
TLV320AC57DW 3-v Voice-band Audio Processors Vbape
TLV320AD11A 3.3v Integrated Adsl Over Pots Codec
TLV320AD11APZ ti TLV320AD11A, 3.3V Integrated Adsl Codec For Cpe
TLV320AD12A 3.3-v Integrated Adsl Codec
TLV320AD13A
TLV320AD13APZ ti TLV320AD13A, 3.3V Integrated Adsl Over Isdn Codec For Cpe
TLV320AD15
TLV320AD15GGW ti TLV320AD15, Eight Channel Integrated Adsl Analog Front End
TLV320AD16 3.3-v Integrated Adsl Codec
TLV320AD16PZ ti TLV320AD16, 3.3-V Integrated Adsl Codec For co

JM38510/34002BCA : ti SN54F11, Triple 3-Input Positive-and Gates

THS1060I : 10-bit 60 MSPS if Sampling Communications Analog-to-digital Converter

TLC32040CFN : Voice-Band Codecs ti TLC32040, Single Channel Codec, 0.3 - 3.4 KHZ Bandwidth

TMS370C742FNA : CISC Microcontroller Family Extract

TPS71501DCKR : 50-mA, Output Adj From 1.2 to 15V, High Input-voltage (up to 24V) LDO Voltage Regulator in SC-70

UCC28516DW : Power Factor Correction IC's ti UCC28516, Advanced Pfc/pwm Combination Controllers

TAS5132DDVG4 : The TAS5132 is an integrated stereo digital amplifier power stage with an advanced protection system. The TAS5132 is capable of driving a 6- bridge-tied load (BTL) at up to 25 W per channel with low integrated noise at the output, low THD+N performance, and low idle power dissipation. A low-cost,

OPA4872IDR : 4:1 High Speed Multiplexe The OPA4872 offers a very wideband 4:1 multiplexer in an SO-14 package. Using only 10.6mA, the OPA4872 provides a user-settable output amplifier gain with greater than 500MHz large-signal bandwidth (2VPP). The switching glitch is improved over earlier solutions using a new

TPA2016D2RGPR : 1.7-W/Ch Stereo Class-D Audio Amplifier With Dynamic Range Compression And AGC The TPA2016D2 is a stereo, filter-free Class-D audio power amplifier with volume control, dynamic range compression (DRC) and automatic gain control (AGC). It is available in a 2.2 mm x 2.2 mm WCSP package. The DRC/AG

GC5322 : Gc5322 Wideband Digital Predistortion Transmit Processor

TRSF3238ECDBG4 : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Line Transceiver Tape & Reel (TR) 3 V ~ 5.5 V; IC DVR/RCVR RS232 ESD 28SOIC Specifications: Number of Drivers/Receivers: 5/3 ; Type: Line Transceiver ; Voltage - Supply: 3 V ~ 5.5 V ; Package / Case: 28-SOIC (0.295", 7.50mm Width) ; Packaging: Tape & Reel (TR) ; Protocol: RS232 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

TPS61050EVM-215 : Eval Board - Led Driver Programmers, Development System; EVALUATION MOD FOR TPS61050-215 Specifications: Current - Output / Channel: 1.2A ; Voltage - Output: 5.5V ; Voltage - Input: 2.5 ~ 6V ; Outputs and Type: 1, Non-Isolated ; Features: Camera Flash and Torch Modes, Dimmable, I²C Interface ; Supplied Contents: Board, CD ; Utilized IC / Part: TPS61050 ; Lead Free Status: Lead

 
0-C     D-L     M-R     S-Z