Details, datasheet, quote on part number: TLV320AC40
PartTLV320AC40
CategoryAnalog & Mixed-Signal Processing
Description3v Voice-band Audio Processors (vbap)
CompanyTexas Instruments, Inc.
DatasheetDownload TLV320AC40 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Single 3-V Operation Low Power Consumption: Operating Mode. 20 mW Typ Standby Mode. 5 mW Typ Power-Down Mode. 2 mW Typ Combined A/D, D/A, and Filters Extended Variable-Frequency Operation Sample Rates to 16 kHz Passband to 7.2 kHz Electret Microphone Bias Reference Voltage Available Drive a Piezo Speaker Directly Compatible With All Digital Signal Processors (DSPs)

Selectable Between 8-Bit Companded and 13-Bit (Dynamic Range) Linear Conversion: TLV320AC40. -Law and Linear Modes TLV320AC41. A-Law and Linear Modes Programmable Volume Control in Linear Mode to 3.6-kHz Passband with Specified Master Clock Designed for Standard 1.152-MHz Master Clock in DECT Standard for Hand-Held Battery-Powered Telephones

PDN EARA EARB EARGS VCC MICMUTE DCLKR DIN FSR EARMUTE
MICBIAS MICGS MICIN VMID GND LINSEL TSX/DCLKX DOUT FSX CLK
NC EARGS EARB EARA PDN MICBIAS MICGS MICIN NC

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. VBAP is a trademark of Texas Instruments Incorporated.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

description

The TLV320AC40 and TLV320AC41 voice-band audio processor (VBAP) integrated circuits perform the transmit encoding (A /D conversion) and receive decoding (D/A conversion) together with transmit and receive filtering for voice-band communications systems. Cellular telephone systems are targeted in particular; however, these integrated circuits can function in other systems including digital audio, telecommunications, and data acquisition. These devices are pin-selectable for either of two modes companded and linear providing data in two formats. In the companded mode, data is transmitted and received in 8-bit words. In the linear mode, 13 bits of data, and either three bits of gain-setting control data, or three 0 bits of padding (to create a16-bit word), are sent and received. The transmit section is designed to interface directly with an electret microphone element. The microphone input signal (MICIN) is buffered and amplified with provision for setting the amplifier gain to accommodate a range of signal input levels. The amplified signal is passed through antialiasing and bandpass filters. The filtered signal is then applied to the input of a compressing analog-to-digital converter (COADC) when companded mode is selected. Otherwise, the analog-to-digital converter performs a linear conversion. The resulting data is then clocked out of DOUT as a serial data stream. The receive section converts a frame of serial data on DIN to analog through an expanding digital-to-analog converter (EXDAC) when the companded mode is selected; otherwise, a linear conversion is performed. The analog signal then passes through switched capacitor filters, which provide out-of-band rejection, (sin x)/x correction functions, and smoothing. The filtered signal is sent to the earphone amplifier. The earphone amplifier has a differential output with adjustable gain and is designed to minimize static power dissipation. A single on-chip high-precision band-gap circuit generates all voltage references, eliminating the need for external reference voltages. An internal reference voltage, VMID, equal to VCC /2 is used to develop the midlevel virtual ground for all the amplifier circuits and the microphone bias circuit. Another reference voltage, MICBIAS, can supply bias current for the microphone. The TLV320AC4xC devices are characterized for operation from to 70C. The TLV320AC4xI devices are characterized for operation from to 85C.

LINSEL 15 MICMUTE MICIN 6 18 Input Buffer Transmit Third-Order Antialias Transmit Sixth-Order Low Pass Transmit First-Order High Pass ADC Output Logic 13 DOUT

12 MICGS 19 288 kHz Band-Gap Voltage Reference A/D Converter Voltage Reference 288 kHz D/A Converter Voltage Reference 8 kHz Autozero 8 kHz


 

Some Part number from the same manufacture Texas Instruments, Inc.
TLV320AC40CDW ti TLV320AC40, 3-V Voice-band Audio Processors
TLV320AC41 3v Voice-band Audio Processors (vbap)
TLV320AC41CDW ti TLV320AC41, 3-V Voice-band Audio Processors
TLV320AC56 3v Voice-band Audio Processors (vbap)
TLV320AC56CDW ti TLV320AC56, 3-V Voice-band Audio Processors
TLV320AC56DW 3-v Voice-band Audio Processors Vbape
TLV320AC57 ti TLV320AC57, 3-V Voice-band Audio Processors
TLV320AC57DW 3-v Voice-band Audio Processors Vbape
TLV320AD11A 3.3v Integrated Adsl Over Pots Codec
TLV320AD11APZ ti TLV320AD11A, 3.3V Integrated Adsl Codec For Cpe
TLV320AD12A 3.3-v Integrated Adsl Codec
TLV320AD13A
TLV320AD13APZ ti TLV320AD13A, 3.3V Integrated Adsl Over Isdn Codec For Cpe
TLV320AD15
TLV320AD15GGW ti TLV320AD15, Eight Channel Integrated Adsl Analog Front End
TLV320AD16 3.3-v Integrated Adsl Codec
TLV320AD16PZ ti TLV320AD16, 3.3-V Integrated Adsl Codec For co
TLV320AD543 Single Channel Data/fax Codec
TLV320AD543PT ti TLV320AD543, 3 V Single Channel Codec W/hybrid op Amps & Speaker Driver
TLV320AIC10
TLV320AIC10CGQER ti TLV320AIC10, General Purpose 16-Bit 22-KSPS DSP Codec

OPA2337PA : ti OPA2337, Microsize, Single-supply CMOS Operational Amplifier Microamplifier Series

PT6703A : Plug-in Power Solutions->Non-Isolated->Single Posi ti PT6703, 1.1 to 1.85V 5V/3.3V-Input 13Amp Programmable Isr

SN7451N3 : ti SN7451, And-or-invert Gates

TIBPAL20R4-15CNT : PALs ti TIBPAL20R4-15C, High-performance Impact<TM> PAL<R> Circuits

TL494N : Pulse-width-modulation Control Circuits

TPS62112RSAT : 17-V, 1.5-A Synchronous Step-Down Converter The TPS6211x devices are a family of low-noise synchronous step-down dc-dc converters that are ideally suited for systems powered from a 2-cell Li-ion battery or from a 12-V or 15-V rail. The TPS6211x is a synchronous PWM converter with integrated - a

UCC27210 : 120V Boot, 4A Peak, High Frequency High-Side Low-Side Driver The UCC27210 and UCC27211 Drivers are based on the popular UCC27200 and UCC27201 MOSFET drivers, but offer several significant performance improvements. Peak output pull-up and pull-down current has been increased to 4-A source/4-A sink, and pull-up/pull-down resistance have been reduced to 0.9 ]

ADS7806PBG4 : Data Acquisition - Analog To Digital Converter (adc) Integrated Circuit (ics) 2 Single-Ended, Unipolar; 2 Single-Ended, Bipolar Tube Analog and Digital; IC ADC 12BIT SER/PAR 40K 28DIP Specifications: Number of Bits: 12 ; Package / Case: 28-DIP (0.300", 7.62mm) ; Data Interface: Serial, Parallel ; Packaging: Tube ; Sampling Rate (Per Second): 40k ; Operating Temperature: -40C ~ 85C ; Voltage Supply Source: Analog and Digital ; Number of Inputs and Type: 2 Single-Ended, Unipolar;

TS5USBC400IYFPT : USB Switch ICs TS5USBC400 Texas Instruments TS5USBC400 Dual 2:1 USB 2.0 Mux/DeMux Switch is a bidirectional low-power dual port, high-speed, USB 2.0 analog switch with integrated protection for USB Type-C? systems. The device is configured as a dual 2:1 or 1:2 switch and is optimized for handling the USB 2.0 D+/- lines in a

Same catergory

ACT8502 : Multiplexers. Act8502 Radiation Hardened & Esd Protected 48-channel Analog Multiplexer Module.

BGY82 : BGY82; Catv Amplifier Module. Product Supersedes data of 1997 Apr 15 File under Discrete Semiconductors, SC16 1998 Mar 02 Excellent linearity Extremely low noise Silicon nitride passivation Rugged construction Optimal reliability ensured by TiPtAu metallized crystals. APPLICATIONS CATV systems operating in the to 450 MHz frequency range. Hybrid amplifier module a SOT115J package.

CA1558 : 0.9MHz Single And Dual, High Gain Operational Amplifiers For Military, Industrial And Commercial Applications FN531.4.

CA2832C : 35.5 DB 1-200 MHZ 1.6 Watt Wideband Linear Amplifier. . designed for amplifier applications to 100 ohm systems requiring wide bandwidth, low noise and low distortion. This hybrid provides excellent gain stability with temperature and linear amplification as a result of the pushpull circuit design. Specified Characteristics at VCC = 25C: Frequency Range to 200 MHz Output Power 1580 mW Typ 1 dB Compression,.

CLC5602 : Dual, High Output, Video Amplifier. The National CLC5602 has a new output stage that delivers high output drive current (130mA), but consumes minimal quiescent supply current (1.5mA/ch) from a single 5V supply. Its current feedback architecture, fabricated in an advanced complementary bipolar process, maintains consistent performance over a wide range of gains and signal levels, and has a linear.

HYB3117400BJ-70 : 3.3v 4m X 4-bit Dynamic RAM. 194 304 words by 4-bit organization 70 C operating temperature Performance: -50 tRAC tCAC tAA tRC tPC RAS access time CAS access time Access time from address Read/Write cycle time Fast page mode cycle time ns Single 0.3V ) supply Low power dissipation max. 396 active mW (HYB3117400BJ/BT-50) max. 363 active mW (HYB3117400BJ/BT-60) max. 330 active mW (HYB3117400BJ/BT-70).

LM6125 : High Speed Buffer. The LM6125 family of high speed unity gain buffers slew at 800 V/s and have a small signal bandwidth of 50 MHz while driving a 50 load. These buffers drive 300 mA peak and do not oscillate while driving large capacitive loads. The LM6125 contains unique not found in power buffers; these include current limit, thermal shutdown, electronic shutdown,.

MAX1680 : Power. 125mA, Frequency-Selectable, Switched-capacitor Voltage Converters.

MC33172-MC35172 : Low Power Dual Bipolar Operational Amplifiers. GOOD CONSUMPTION/SPEED RATIO : ONLY 200A/Amp FOR 2.1MHz, 2V/s SINGLE (OR DUAL) SUPPLY OPERATION FROM TO 22V) WIDE INPUT COMMON MODE VOLTAGE RANGE INCLUDING VCCLOW LEVEL OUTPUT VOLTAGE CLOSE TO VCC- : 100mV TYPICAL PIN TO PIN COMPATIBLE WITH STANDARD DUAL OP AMPs The MC33172 series are dual bipolar operational amplifiers offering both low consumption.

NJM2712 : Ultra High Speed Single Operational Amplifier. ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER s GENERAL The is an ultra high speed dual operational amplifier. It can swings 260V/s high slew rate and 1GHz gain band width product(10MHz typ. It is suitable for pickup circuit of CD-R/RW or DVDR/RW, wideband video system, high resolution scanner or FAX, high speed telecommunications, and any other high.

NJM4558 : Dual Operational Amplifier.

OPA4137 : . LOW COST FET-INPUT OPERATIONAL AMPLIFIERS MicroAmplifier TM Series FET INPUT: = 5pA LOW OFFSET VOLTAGE: 1.5mV WIDE SUPPLY RANGE: to 18V LOW QUIESCENT CURRENT: 220A/channel EXCELLENT SPEED/POWER: 1MHz INPUT TO POSITIVE SUPPLY MicroSIZE PACKAGES: SOT-23-5, MSOP-8 SINGLE, DUAL, AND QUAD OPA137 series FET-input operational amplifiers are designed for low cost.

RH1011 : Voltage Comparator. The is a general purpose comparator with significantly better input characteristics than the LM111. Although pin compatible with the LM111, it offers four times lower bias current, six times lower offset voltage and five times higher voltage gain. The wafer lots are processed to Linear Technology's inhouse Class S flow to yield circuits usable in stringent.

STK311-110 : RDS Demodulator. The is an RDS demodulator hybrid IC for the Radio Data System (RDS), or multiplexed FM broadcasting of various kinds of data, introduced within the European Broadcasting Union (EBU). It demodulates the multiplexed data modulating signal to recover the RDS signal. In combination with an LC7070 series LSI (for sync handling, error detection and correction),.

STK350-020 : 2-channel, (80 to 90W/channel Supported) af Voltage Amplifier. The is a voltage amplifier for use in audio power output stages. It comprises a 2-channel amplifier integrated in a small package, making possible audio set miniaturization and design simplification. Split power supply for wide bandwidth to 20kHz). Member of a family of devices with power capacities from to 150W. Compact package. High withstand voltage.

TLV2450AID : ti TLV2450A, Single Micropower Rail-to-rail Input/output op Amp W/shutdown.

AD8264 : Quad, 235 MHz, DC Coupled VGA And Differential Output Amplifier The AD8264 is a 4-channel, linear-in-dB, general-purpose variable gain amplifier (VGA) with a preamplifier (preamp), and a flexible differential output buffer. Intended for a broad range of.

 
0-C     D-L     M-R     S-Z