Details, datasheet, quote on part number: TLV320AC57DW
PartTLV320AC57DW
CategoryAnalog & Mixed-Signal Processing => Amplifiers => Audio/Power Amplifiers
Description3-v Voice-band Audio Processors Vbape
CompanyTexas Instruments, Inc.
DatasheetDownload TLV320AC57DW datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Single 3-V Operation Low Power Consumption: Operating Mode. 20 mW Typ Standby Mode. 5 mW Typ Power-Down Mode. 2 mW Typ Combined A/D, D/A, and Filters Extended Variable-Frequency Operation Sample Rates to 16 kHz Passband to 7.2 kHz Electret Microphone Bias Reference Voltage Available Drive a Piezo Speaker Directly Compatible With All Digital Signal Processors (DSPs)

Selectable Between 8-Bit Companded and 13-Bit (Dynamic Range) Linear Conversion: TLV320AC56. -Law and Linear Modes TLV320AC57. A-Law and Linear Modes Programmable Volume Control in Linear Mode to 3.6-kHz Passband with Specified Master Clock Designed for Standard 2.048-MHz Master Clock for U.S. Analog, U.S. Digital, and CT2, DECT, GSM, and PCS Standards for Hand-Held Battery-Powered Telephones

PDN EARA EARB EARGS VCC MICMUTE DCLKR DIN FSR EARMUTE
MICBIAS MICGS MICIN VMID GND LINSEL TSX/DCLKX DOUT FSX CLK
NC EARGS EARB EARA PDN MICBIAS MICGS MICIN NC

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. VBAP is a trademark of Texas Instruments Incorporated.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

description

The TLV320AC56 and TLV320AC57 voice-band audio processor (VBAP) integrated circuits perform the transmit encoding (A /D conversion) and receive decoding (D/A conversion) together with transmit and receive filtering for voice-band communications systems. Cellular telephone systems are targeted in particular; however, these integrated circuits can function in other systems including digital audio, telecommunications, and data acquisition. These devices are pin-selectable for either of two modes companded and linear providing data in two formats. In the companded mode, data is transmitted and received in 8-bit words. In the linear mode, 13 bits of data and either three bits of gain-setting control data, or three 0 bits of padding (to create a16-bit word), are sent and received. The transmit section is designed to interface directly with an electret microphone element. The microphone input signal (MICIN) is buffered and amplified with provision for setting the amplifier gain to accommodate a range of signal input levels. The amplified signal is passed through antialiasing and bandpass filters. The filtered signal is then applied to the input of a compressing analog-to-digital converter (COADC) when companded mode is selected. Otherwise, the analog-to-digital converter performs a linear conversion. The resulting data is then clocked out of DOUT as a serial data stream. The receive section converts a frame of serial data on DIN to analog through an expanding digital-to-analog converter (EXDAC) when the companded mode is selected; otherwise, a linear conversion is performed. The analog signal then passes through switched capacitor filters, which provide out-of-band rejection, (sin x)/x correction functions, and smoothing. The filtered signal is sent to the earphone amplifier. The earphone amplifier has a differential output with adjustable gain and is designed to minimize static power dissipation. A single on-chip high-precision band-gap circuit generates all voltage references, eliminating the need for external reference voltages. An internal reference voltage, VMID, equal to VCC /2 is used to develop the midlevel virtual ground for all the amplifier circuits and the microphone bias circuit. Another reference voltage, MICBIAS, can supply bias current for the microphone. The TLV320AC5xC devices are characterized for operation from to 70C. The TLV320AC5xI devices are characterized for operation from to 85C.

LINSEL 15 MICMUTE MICIN 6 18 Input Buffer Transmit Third-Order Antialias Transmit Sixth-Order Low Pass Transmit First-Order High Pass ADC Output Logic 13 DOUT

12 MICGS 19 256 kHz Band-Gap Voltage Reference A/D Converter Voltage Reference 256 kHz D/A Converter Voltage Reference 8 kHz Autozero 8 kHz


 

Related products with the same datasheet
TLV320AC56N
TLV320AC56PT
TLV320AC57N
TLV320AC57PT
Some Part number from the same manufacture Texas Instruments, Inc.
TLV320AC57N 3-v Voice-band Audio Processors Vbape
TLV320AD11A 3.3v Integrated Adsl Over Pots Codec
TLV320AD11APZ ti TLV320AD11A, 3.3V Integrated Adsl Codec For Cpe
TLV320AD12A 3.3-v Integrated Adsl Codec
TLV320AD13A
TLV320AD13APZ ti TLV320AD13A, 3.3V Integrated Adsl Over Isdn Codec For Cpe
TLV320AD15
TLV320AD15GGW ti TLV320AD15, Eight Channel Integrated Adsl Analog Front End
TLV320AD16 3.3-v Integrated Adsl Codec
TLV320AD16PZ ti TLV320AD16, 3.3-V Integrated Adsl Codec For co
TLV320AD543 Single Channel Data/fax Codec
TLV320AD543PT ti TLV320AD543, 3 V Single Channel Codec W/hybrid op Amps & Speaker Driver
TLV320AIC10
TLV320AIC10CGQER ti TLV320AIC10, General Purpose 16-Bit 22-KSPS DSP Codec
TLV320AIC10EVM
TLV320AIC10IGQER ti TLV320AIC10, General Purpose 16-Bit 22-KSPS DSP Codec
TLV320AIC10PFB General-purpose 3v to 5.5v 16-bit 22-ksps DSP Codec
TLV320AIC11
TLV320AIC1103
TLV320AIC1103GQER ti TLV320AIC1103, Programmable PCM Codec With Microphone Amps & Speaker Driver
TLV320AIC1106

7704001HA : 5V, 500mA Fixed Negative Voltage Regulator

SN74ABT377A : CMOS/BiCMOS->ABT/BCT Family Octal Edge-triggered D-type Flip-flop With Clock Enable

TL5001AQDR : Switching DC/DC Controllers ti TL5001A, PWM Controller With Wide Input Voltage Range

TPS2097DR : Current Limited Switches ti TPS2097, 0.3A, 2.7 to 5.5V Quad (4 Input/ 4 Output) High-side MOSFET Switch IC, Fault Reporting, 4 Act-lo en

7BT2L6D-364 : HIGH Capacity Environmentally Sealed

CD4072BMTE4 : Logic - Gate And Inverter Integrated Circuit (ics) OR Gate Tape & Reel (TR) 6.8mA, 6.8mA 3 V ~ 18 V; IC DUAL 4INPUT OR GATE 14-SOIC Specifications: Number of Circuits: 2 ; Package / Case: 14-SOIC (0.154", 3.90mm Width) ; Logic Type: OR Gate ; Packaging: Tape & Reel (TR) ; Mounting Type: Surface Mount ; Number of Inputs: 4 ; Current - Output High, Low: 6.8mA, 6.8mA ; Operating Temperature: -55C ~ 125C ; Voltage - Supply: 3

UC2853DG4 : Pmic - Pfc (power Factor Correction) Integrated Circuit (ics) Tube 56kHz ~ 94kHz 12 V ~ 40 V; IC PFC CTRLR AVERAGE CURR 8SOIC Specifications: Packaging: Tube ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Voltage - Supply: 12 V ~ 40 V ; Mode: Average Current ; Frequency - Switching: 56kHz ~ 94kHz ; Current - Startup: 250A ; Operating Temperature: -25C ~ 85C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

CY54FCT574ATLMB : FCT SERIES, 8-BIT DRIVER, TRUE OUTPUT, CDIP20 Specifications: Technology: CMOS ; Device Type: Line / Bus Driver ; Supply Voltage: 5V ; Operating Temperature: -55 to 125 C (-67 to 257 F) ; Package Type: DIP, CERAMIC, DIP-20 ; Pins: 20

OPA316 : 10-MHz, Low-Power, Low-Noise, RRIO, 1.8-V CMOS Operational Amplifier The OPA316 family of single, dual and quad operational amplifiers represents a new generation of general purpose, low-power operational amplifiers. Featuring rail-to-rail input and output swings, low quiescent current (400 A/ch typ) combined with a wide bandwidth of 10 MHz and very-low noise (11 nV

TLV4316IPWR : IC OP AMP CMOS RR 10MHZ 14TSSOP Texas Instruments' TLV316 (single), TLV2316 (dual), and TLV4316 (quad) devices comprise a family of general-purpose, low-power operational amplifiers. Features such as rail-to-rail input and output swings, low quiescent current (400 µA/ch typical) combined with a wide bandwidth of 10 MHz, a

TPS54A20EVM-770 : Power Management IC Development Tools 4.5V to 25V input DCAP3 Mode Texas Instruments TPS54A20 SWIFT Step-Down Converter is a two-phase, synchronous series capacitor buck converter designed for small size, low voltage applications from a 12V input rail. This topology uniquely merges a switched capacitor circuit with a two-phase buck converter. Advantages include

TPS61178RNWT : Switching Voltage Regulators 20-V Integrated Sync Boost Texas Instruments TPS61178x Integrated Synchronous Boost Converters come with the gate driver built-in for load disconnect. Each device integrates two low on-resistance power FETs: A 16m switching FET and a 16m rectifier FET. The TPS61178x uses the fixed frequency peak current mode control with t

 
0-C     D-L     M-R     S-Z