Details, datasheet, quote on part number: TPS3808G09
PartTPS3808G09
Category
DescriptionLow Quiescent Current, Programmable-delay Supervisory Circuit
CompanyTexas Instruments, Inc.
DatasheetDownload TPS3808G09 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

FEATURES

Power-On Reset Generator with Adjustable Delay Time: to 10s Very Low Quiescent Current: 2.4-A typ High Threshold Accuracy: 0.5% typ Fixed Threshold Voltages from 5 V and Adjustable Voltage Down 0.4 V Are Available Manual Reset (MR) Input Open-Drain RESET Output Temperature Range: to 125C Small SOT23 Package

DESCRIPTION

The TPS3808xxx family of microprocessor supervisory circuits monitor system voltages from 5.0 V, asserting an open drain RESET signal when the SENSE voltage drops below a preset threshold or when the manual reset (MR) pin drops to a logic low. The RESET output remains low for the user adjustable delay time after the SENSE voltage and manual reset (MR) return above their thresholds. The TPS3808 uses a precision reference to achieve 0.5% threshold accuracy for VIT 3.3V. The reset delay time can be set 20ms by disconnecting the CT pin, 300ms by connecting the CT pin to VDD using a resistor, or can be user-adjusted between 1.25ms and 10s by connecting the CT pin to an external capacitor. The TPS3808 has a very low typical quiescent current it is well-suited to battery-powered applications. It is available in a small SOT23 package and is fully specified over a temperature range to 125C.

APPLICATIONS

DSP or Microcontroller Applications Notebook/Desktop Computers PDAs/Hand-Held Products Portable/Battery-Powered Products FPGA/ASIC Applications

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. ORDERING INFORMATION

PRODUCT NOMINAL SUPPLY VOLTAGE (1) Adjustable 3.3V 5.0V THRESHOLD VOLTAGE (VIT) 3.07V 4.65V SPECIFIED TEMPERATURE RANGE to +125C PACKAGE MARKING AVW AVV AVY AVS AVR AVQ AVP AVO AVN ORDERING NUMBER TPS3808G50DBVT TPS3808G50DBVR TRANSPORT MEDIA, QUANTITY Tape and Reel, 250 Tape and Reel, 3000 Tape and Reel, 250 Tape and Reel, 3000 Tape and Reel, 250 Tape and Reel, 3000 Tape and Reel, 250 Tape and Reel, 3000 Tape and Reel, 250 Tape and Reel, 3000 Tape and Reel, 250 Tape and Reel, 3000 Tape and Reel, 250 Tape and Reel, 3000 Tape and Reel, 250 Tape and Reel, 3000 Tape and Reel, 250 Tape and Reel, 3000

Custom threshold voltages from 5.0 V are available on a quick-turn basis for fast prototyping. Minimum order quantities apply. Contact factory for details and availability. Available July, 2004.

over operating junction temperature range (unless otherwise noted) (1)

TPS3808 Input voltage range, VDD CT voltage range, VCT Other voltage ranges: VRESET, VMR, VSENSE RESET pin current Operating junction temperature range, TJ (2) Storage temperature range, TSTG ESD rating, HBM ESD rating, CDM -0.3 to VDD 2 500 UNIT kV V

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under the Electrical Characteristics is not implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability. Due to the low dissipated power in this device, it is assumed that TJ = TA.

1.8 V VDD 6.5 V, RLRESET 100 k, CLRESET = 50 pF, over operating temperature range (TJ to +125C), unless otherwise noted. Typical values are = 25C.

PARAMETER VDD IDD Input supply range VDD 3.3 V, RESET not asserted MR, RESET, CT open VDD 6.5 V, RESET not asserted MR, RESET, CT open 1.3 V VDD 1.8 V, IOL 1.8 V VDD 6.5V, IOL 1.0 mA VOL (max) 0.2 V, IRESET 15A TPS3808G01 VIT V < VIT 5.0 V VSENSE = VIT VSENSE 6.5 V VRESET 6.5 V, RESET not asserted CT pin Other pins VIN V to VDD VIN V 0.3 VDD 0.7 VDD SENSE CT = Open td RESET delay time CT = VDD 180 nF Propagation delay tpHL JA (1) High to low level RESET delay Thermal resistance, junction-to-ambient The lowest supply voltage (VDD) at which RESET becomes active. Trise(VDD) 15 s/V. MR to RESET VIH = 0.7 VDD, VIL = 0.3 VDD See timing diagram VIH = 1.05 VIT, VIL = 0.95 VIT VIH = 0.7 VDD, VIL = 0.3 VDD TPS3808G01 Fixed versions TEST CONDITIONS MIN 2.4 2.7 TYP MAX %VIT ns s C/W % UNIT A V

Low-level output voltage Power-up reset voltage (1)

MR Internal pull-up resistance Input current at SENSE pin RESET leakage current Input capacitance, any pin MR logic low input MR logic high input Maximum transient duration


 

Related products with the same datasheet
TPS3808G09DBVR
TPS3808G09DBVT
Some Part number from the same manufacture Texas Instruments, Inc.
TPS3808G09DBVR Low Quiescent Current, Programmable-delay Supervisory Circuit
TPS3808G12
TPS3808G15
TPS3808G18
TPS3808G25
TPS3808G30
TPS3808G33
TPS3808G50
TPS3809I50 3-pin Supply Voltage Supervisors
TPS3809I50DBV
TPS3809I50DBVR ti TPS3809I50, 3-Pin Supply Voltage Supervisor
TPS3809I50QDBVRQ1 ti TPS3809I50-Q1, Automotive Catalog 3-Pin Supply Voltage Supervisor
TPS3809J25 3-pin Supply Voltage Supervisors
TPS3809J25DBV
TPS3809J25DBVR ti TPS3809J25, 3-Pin Supply Voltage Supervisor
TPS3809J25QDBVRQ1 ti TPS3809J25-Q1, Automotive Catalog 3-Pin Supply Voltage Supervisor
TPS3809K33 3-pin Supply Voltage Supervisors
TPS3809K33DBV
TPS3809K33DBVR ti TPS3809K33, 3-Pin Supply Voltage Supervisor
TPS3809K33QDBVRQ1 ti TPS3809K33-Q1, Automotive Catalog 3-Pin Supply Voltage Supervisor
TPS3809L30 3-pin Supply Voltage Supervisors

SN74AHC126DGVR : Non-Inverting Buffers and Drivers ti SN74AHC126, Quadruple Bus Buffer Gates With 3-State Outputs

TLC542CN : ti TLC542, 8-Bit, 25 KSPS ADC Serial-Out, On-chip 12-Ch. Analog Mux, 11 Ch.

TPS7101YPW : Low-dropout Voltage Regulators

5962-9957201QYA : Precision Programmable Reference

LM4041CIDCKRG4 : Precision Micropower Shunt Voltage Reference

TMS32C6416EZLZA300 : Floating-point Digital Signal Processors

TPS650245RHB : Power Management ICs for Li-ion Powered Systems

TSB41BA3BPFPG4 : IEEE 1394b Three-port Cable Transceiver/arbiter

TPS61301YFFR : Pmic - Led Driver Integrated Circuit (ics) Flash/Torch, General Purpose Yes Yes; IC LED FLASH DVR I2C 20DSBGA Specifications: Type - Primary: Flash/Torch, General Purpose ; Type - Secondary: White LED ; Number of Outputs: 3 ; Constant Current: Yes ; Constant Voltage: Yes ; Topology: PWM, Step-Up (Boost) ; Frequency: 1.92MHz ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

TL1431QLP : Precision Adjustable (Programmable) Shunt Reference he TL1431 is a precision programmable reference with specified thermal stability over automotive, commercial, and military temperature ranges. The output voltage can be set to any value between VI(ref) (approximately 2.5 V) and 36 V with two exter

ADS8509IBDWRG4 : 3-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO28 Specifications: Package Type: SSOP, PLASTIC, SSOP-28 ; Screening Level: Industrial ; Pins: 28 ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Sample Rate: 200 kSamples/Sec ; Input Voltage: -10 to 10 volts

CC2564MODACMOG : RF TXRX MOD BLUETOOTH CHIP ANT Texas Instruments' CC2564MODA module is a complete Bluetooth BR/EDR/LE HCI solution based on TI’s CC2564B, dual-mode, Bluetooth single-chip device. This reduces design effort and enables fast time-to-market. The CC2564MODA module includes TI’s seventh-generation core and provides a pr

Same catergory

4N29 : GAAS Ired & Photo-transistor Photocoupler (darlington).

7052 : Multi-Ports. 2K X 8 Fourporttm RAM. High-speed access Military: 25/35ns (max.) Commercial: 20/25/35ns (max.) Low-power operation IDT7052S Active: 750mW (typ.) Standby: 7.5mW (typ.) IDT7052L Active: 750mW (typ.) Standby: 1.5mW (typ.) True FourPort memory cells which allow simultaneous access of the same memory locations Fully asynchronous operation from each of the four ports:.

CXG1100TN : High Power DPDT Switch With Logic Control. High Power DPDT Switch with Logic Control The is a high power DPDT switch MMIC. This IC can be used in wireless communi-cation systems, for example, dual-band CDMA handsets. The CXG1100TN can be operated by CMOS control. The Sony's JFET process is used for low insertion loss and on-chip logic circuit. Low insertion loss: 0.35dB @900MHz High linearity:.

HAT1020R : Power Switching MOSFET. Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips.

JANSR2N7396 : 5a, 200v, 0.460 Ohm, Rad Hard, N-channel Power MOSFET. The Discrete Products Operation of Intersil Corporation has developed a series of Radiation Hardened MOSFETs specifically designed for commercial and military space applications. Enhanced Power MOSFET immunity to Single Event Effects (SEE), Single Event Gate Rupture (SEGR) in particular, is combined with 100K RADS of total dose hardness to provide devices.

M57951L : Hybrid ic For Driving Transistor Modules. is a Hybrid Integrated Circuit designed for driving Transistor Modules QM30DY, QM50DY, etc., in an Inverter application. This device operates as an isolation amplifier for Transistor Modules due to the electrical isolation between the input and output, and includes three independent circuits. q Three independent circuits are included. Isolation voltage:.

CDRH104 : Power Inductors (SMD Type). Power Inductors <SMD Type: CDRH Series> 10.5 9.2mm Max.(L 10.3mm Max.(L W), 5.0mm Max. Height. (CDRH104) W), 4.0mm Max. Height. 0.52 6.5A(CDRH104R). In addition to the standards versions shown here, custom inductors are also available to meet your exact requirements. Feature Magnetically shielded construction. Ideally used in Notebook PC, LCD TV,DVD,.

TEL5_06 : Dc/dc Converters. TEL 5 Series, 5/6 Watt Wide 2:1 Input Range Cost efficient SMD-Design High Power Density High Efficiency to 86% Regulated Outputs I/O-Isolation 1'500 VDC Indefinite Short-Circuit Protection High Reliability, MTBF >1 Mio. h Internal EMI Filter to comply with Lead free Design, RoHS compliant 3 Year Product Warranty The TEL 5 Series is a range of DC/DC-converter.

HCC4025BF : NOR GATE. 4000BDUAL 3 INPUT PLUS INVERTER 4001BQUAD 2 INPUT 4002B-DUAL 4 INPUT 4025B TRIPLE 3 INPUT micropackage. The HCC/HCF4000B, HCC/HCF4001B, HCC/HCF 4002B and HCC/HCF4025B nor gate provide the system designer with direct implementation of the nor function and supplement the existing family of COS/MOS gates. All inputs and outputs are buffered. PROPAGATION.

HQ50A-48-1.5 : 40-50a High Efficiency Quarter Bricks. The HQ series of high current, high efficiency DC/DC converters offer current levels that exceed all other quarterbricks and are comparable to existing quarter-bricks. With a wide input voltage range of 36-75V they are available with an output voltage of either or 3.3 Volts. All models feature an input filter, input undervoltage lockout, output overvoltage.

T0806_05 : 3-channel Laser Driver with RF Oscillator and 2 Outputs. Current-controlled Output Current Source, 3 Input Channels Two Selectable Outputs for Grounded Laser Diodes Output Current per Channel 250 mA Total Output Current 300 mA (Minimum) Rise Time 1.0 ns, Fall Time 1.1 ns On-chip RF Oscillator Control of 2 Different Swings by Use of 2 external Resistors Oscillator Frequency Range from 200 MHz to 600 MHz Oscillator.

TPS2158IDGNG4 : 3.3-v LDO AND DUAL Switch FOR USB Peripheral Power Management. The TPS2148 incorporates two power distribution switches and an LDO in one small package, providing a USB peripheral power management solution that saves 60% in board space over typical implementations. The TPS2148 meets USB 2.0 bus-powered peripheral requirements. An integrated LDO regulates the 5-V bus power down 3.3 V for the USB controller, and a MOSFET.

PM1002G1 : Heavy Duty Power Connectors INSERTION TOOL TOOL. » » » Cable Tools & Accessories for Solar Cable Tools & Accessories for Solar Photovoltaic wiring and connector systems have high resistance against environmental conditions such as humidity , UV - radiation and ozone . In addition, mating safety is provided by polarity keyed housings,.

1-1658620-0 : Gold Free Hanging (In-Line) Rectangular - Free Hanging, Panel Mount Connectors, Interconnect Receptacle; CONN IDC SOCKET 50POS 15 GOLD. s: Color: Black ; Connector Type: Receptacle ; Contact Finish: Gold ; : Feed Through ; Mounting Type: Free Hanging (In-Line) ; Number of Rows: 2 ; Pitch: 0.100" (2.54mm) ; Row Spacing: 0.100" (2.54mm) ; Packaging: Tube.

MS3106F36-6P : Aluminum, Olive Drab Cadmium Plated Free Hanging (In-Line) Circular Connectors, Interconnect Plug, Male Pins; CONN PLUG 6 POS STRAIGHT W/PINS. s: Connector Type: Plug, Male Pins ; Shell Size - Insert: 36-6 ; Mounting Type: Free Hanging (In-Line) ; Fastening Type: Threaded ; : Strain Relief ; Packaging: Bulk ; Number of Positions: 6 ; Termination: Solder.

P6KE33CA-TP : Tv - Diode Circuit Protection 28.2V 600W; TVS 600W 33V BIDIRECT DO-15. s: Package / Case: DO-204AC, DO-15, Axial ; Packaging: Digi-Reel ; Polarization: Bidirectional ; Power (Watts): 600W ; Voltage - Reverse Standoff (Typ): 28.2V ; Voltage - Breakdown: 31.4V ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

2SA1806JRL : Transistor (bjt) - Single Discrete Semiconductor Product 50mA 15V 125mW PNP; TRANS PNP 15VCEO 50MA SSMINI-3. s: Transistor Type: PNP ; Voltage - Collector Emitter Breakdown (Max): 15V ; Current - Collector (Ic) (Max): 50mA ; Power - Max: 125mW ; DC Current Gain (hFE) (Min) @ Ic, Vce: 90 @ 10mA, 1V ; Vce Saturation (Max) @ Ib, Ic: 200mV @ 1mA, 10mA ; Frequency.

130560-0 : 26.6 mm2, RING TERMINAL. s: Terminal Type: Ring Terminal ; North American: 4 AWG ; International: 26.6 mm2.

9.000MHZUM-1SMD/3/3/0+50/32 : QUARTZ CRYSTAL RESONATOR, 9 MHz. s: Package / Form Factor: Surface Mount, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED, SMD, 3 PIN ; / Standards: RoHS, Lead-Free ; Frequency: 9 MHz ; Load Capacitance: 32 pF ; Drive Level: 0.1000 milliwatts ; ESR: 60 ohms ; Operating Temperature: 0 to 50 C (32 to 122 F).

 
0-C     D-L     M-R     S-Z