Details, datasheet, quote on part number: TPS3823-25QDBVRQ1
PartTPS3823-25QDBVRQ1
CategorySemiconductors => Power Management => Supervisor and Reset IC
Part familyTPS3823-Q1 Voltage Monitor With Watchdog Timer for Automotive
DescriptionVoltage Monitor With Watchdog Timer for Automotive 5-SOT-23 -40 to 125
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleYes
DatasheetDownload TPS3823-25QDBVRQ1 datasheet
Cross ref.Similar parts: STM6822ZWY6F, STM6822YWY6F, STM6822ZWY6F
Quote
Find where to buy
 
Specifications 
Time Delay(ms)200
Threshold Voltage 1(Typ)(V)2.25,2.63,2.93,4.55
Reset Threshold Accuracy(%)2.2
Package GroupSOT-23
Output Driver Type / Reset OutputActive-low,Push-pull
Iq(Typ)(uA)15
Operating Temperature Range(C)-40 to 125
# of Supplies Monitored1
RatingAutomotive
FeaturesActive Low Enable,Manual Reset,Watchdog Timer
VCC(Min)(V)1.1
Watchdog Timer WDI(sec)1.6
Monitored Voltage 1 (typ)(Nom)(V)2.5,3,3.3,5
VCC(Max)(V)5.5
Monitored Voltage 2 (typ)(Nom)(V)N/A
Threshold Voltage 2 (typ)(Typ)(V)N/A
Approx. Price (US$)0.78 | 1ku
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
5DBVSOT-23R-PDSO-G3000LARGE T&RPAPQ 1.62.91.2.95

 

Features, Applications

features

AEC-Q100 Qualified for Automotive Applications Customer-Specific Configuration Control Can Be Supported Along With Major-Change Approval ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Using Human Body Model = 100 pF, 1500 ) Power-On Reset Generator With Fixed Delay Time ms (TPS3820) Manual Reset Input (TPS3820/3/5/8) Reset Output Available in Active-Low (TPS3820/3/4/5), Active-High (TPS3824) and Open-Drain (TPS3828) Supply Voltage Supervision Range 5 V Watchdog Timer (TPS3820/3/4/8) Supply Current 15 µA (Typ) SOT23-5 Package

applications

Microcontrollers, or Microprocessors Industrial Equipment Programmable Controls Automotive Systems Battery-Powered Equipment Intelligent Instruments Wireless Communications Systems

Contact factory for details. Q100 qualification data available on request.
description

The TPS382x family of supervisors provides circuit initialization and timing supervision, primarily for DSP and processor-based systems.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

During power-on, RESET is asserted when supply voltage VDD becomes higher than 1.1 V. Thereafter, the supply voltage supervisor monitors VDD and keeps RESET active as long as VDD remains below the threshold voltage VIT­. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time, td, starts after VDD has risen above the threshold voltage VIT­. When the supply voltage drops below the threshold voltage VIT­, the output becomes active (low) again. No external components are required. All the devices of this family have a fixed-sense threshold voltage VIT­ set by an internal voltage divider. The TPS3820/3/5/8 devices incorporate a manual reset input, MR. A low level at MR causes RESET to become active. The TPS3824/5 devices include a high-level output RESET. TPS3820/3/4/8 have a watchdog timer that is periodically triggered by a positive or negative transition at WDI. When the supervising system fails to retrigger the watchdog circuit within the time-out interval, ttout, RESET becomes active for the time period td. This event also reinitializes the watchdog timer. Leaving WDI unconnected disables the watchdog. In applications where the input to the WDI pin may be active (transitioning high and low) when the TPS3820/3/4/8 is asserting RESET, the TPS3820/3/4/8 does not return to a non-reset state when the input voltage is above Vt. If the application requires that input to WDI is active when RESET is asserted, WDI must be decoupled from the active signal. This can be accomplished by using an N-channel FET in series with the WDI pin, with the gate of the FET connected to the RESET output as shown in Figure 1.

Figure 1 The product spectrum is designed for supply voltages 3.3 V, and 5 V. The circuits are available 5-pin SOT23-5 package. The TPS382x-xxQ-Q1 devices are characterized for operation over a temperature range to 125°C, and are qualified in accordance with AEC-Q100 stress test qualification for integrated circuits.

PACKAGE INFORMATION DEVICE NAME TPS3828-33QDBVRQ1 TPS3828-50QDBVRQ1 THRESHOLD VOLTAGE 2.93 V MARKING PDEQ PDDQ PAPQ PAQQ PARQ PASQ PATQ PAUQ PAVQ PAWQ PDGQ PDFQ PDIQ PDHQ

4.55 V The DBVR package indicates tape and reel of 3000 parts. FUNCTION/TRUTH TABLE INPUTS § TPS3824/5 VDD>VIT OUTPUTS RESET


 

Some Part number from the same manufacture Texas Instruments, Inc.
TPS3823-30DBVR 25 - Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-30DBVR ti TPS3823-30, Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-30DBVT 25 - Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-30DBVT ti TPS3823-30, Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-30QDBVRQ1 25 - Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-30QDBVRQ1 ti TPS3823-30-Q1, Automotive Catalog Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-33DBVR 25 - Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-33DBVR ti TPS3823-33, Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-33DBVT 25 - Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-33DBVT ti TPS3823-33, Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-33QDBVRQ1 25 - Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-33QDBVRQ1 ti TPS3823-33-Q1, Automotive Catalog Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-50DBVR 25 - Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-50DBVR ti TPS3823-50, Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-50DBVT 25 - Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-50DBVT ti TPS3823-50, Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-50QDBVRQ1 25 - Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-50QDBVRQ1 ti TPS3823-50-Q1, Automotive Catalog Supply Voltage Supervisor W/watchdog Input And Manual Reset
TPS3823-XX Processor Supervisory Circuits
TPS3824 30 - Supply Voltage Supervisor W/watchdog Input, Reset, /RESET
TPS3824

BQ2016DBQ : Gas Gauges ti BQ2016, Nicd/nimh Gas Gauge For High Discharge Rates (>5A), With Pack Capacities (<5Ah)

BQ2112BKT : Nicd or Nimh Gas Gauge Module With Slow-charge Control

SN54AS869FK : Synchronous 8-bit Up/down Counters

SNJ54HC251J : Multiplexers ti SN54HC251, Data Selectors/multiplexers With 3-State Outputs

UC2843AD8TR : Current Mode ti UC2843A, Current Mode PWM Controller

TPS386000 : Quad Supply Voltage Supervisors With Programmable Delay And Watchdog Timer The TPS3860x0 family of voltage supervisors can monitor four power rails that are greater than 0.4V with a 0.25% (typical) threshold accuracy. Each of the four supervisory circuits (SVS-n) assert a RESETn or RESETn output si

DCP021205DU : Miniature, 2W, Isolated Unregulated Dc/dc Converters

AM3359BZCZA80 : IC MPU SITARA 800MHZ 324NFBGA The Texas Instruments' certified hardware and software components for PROFINET IRT v2.3 device applications is the leading industrial Ethernet standard used in numerous Industrial segments and end-equipments that require real-time deterministic exchange of IO data and additional bandwidth for ser

LM25141QRGERQ1 : Switching Controllers Automotive, 2.2MHz, Low Iq Synchronous Buck Controller With Frequency Spread Spectrum 24-VQFN -40 to 125 Texas Instruments LM25141/LM25141-Q1 Synchronous Buck Controllers are intended for high voltage wide VIN step-down converter applications. The control method is peak current mode control. Current mode control provides inherent line feed-forward, cycle-by-cycle current limiting, and ease of loop c

LMS3655NQEVM : EVAL BOARD FOR LMS3655-Q1 Texas Instruments' LMS3655 synchronous buck regulators are optimized for high performance applications, providing an adjustable output of 1 V to 15 V. Seamless transition between PWM and PFM modes, along with a low quiescent current, ensures high efficiency and superior transient responses a

Same catergory

EZ1580CM : Dual Input Low Dropout Regulator. The EZ158X family of high performance positive voltage regulators are designed for use in applications requiring very low dropout voltage 5, 3 and 1.5 amps. When supplying 2.5V on motherboards where both 5V and 3.3V supplies are available, the superior dropout characteristics of the EZ158X result in reduced heat dissipation compared to regular LDOs,.

LM123 : Three-terminal 3A-5V Positive Voltage Regulators. OUTPUT CURRENT: 3A INTERNAL CURRENT AND THERMAL LIMITING TYPICAL OUTPUT IMPEDANCE: 0.01 MINIMUM INPUT VOLTAGE: 7.5V POWER DISSIPATION: 30W The LM223, LM323 are three-terminal positive voltage regulators with a preset 5V output and a load driving capability of 3A. New circuit design and processing techniques are used to provide the high output current.

MAX1947 : Low Input/output Voltage Step-up DC-DC Converter With Reset-bar The MAX1947 is a Compact, High-efficiency, Step-up DCDC Converter That Regulates Output Voltages From 1.8V to 3.3V to Power µP/DSP Cores, Memory, And I/o Rails in 1- And 2-cell Alkaline/nimh/nicd Battery-powered Systems. It an Internal 800mA Switch And Synchronous Rectifier to Achieve up to 94% Efficiency.

MIC94050 : High Side Switches->High Side Load Switcher. MIC94050/94051 4-Terminal TinyFET™ P-channel MOSFET.

P14TG-2405Z41H35M : Power/w = 3 ;; Input/vdc = 9-36/18-72 ;; Output/vdc = +/-3,3/5/12/15/18Regulated ;; ISOlation = 3500V ;; Package = DIP24M.

PQ12RF14 : 1A Output, Low Power Loss Voltage Regulator Considering Power Line Voltage Drop..

PT3328 : . Input Voltage Range: 75V 1500 VDC Isolation On/Off Control Vo Adjust Differential Remote Sense Current Limit Short-Circuit Protection Over-T emperature Shutdown Undervoltage Lockout UL1950 Recognized Flexible SIP Package CSA 22.2 950 Certified EN60950 Approved VDE Licensed 4.9 x106 Hrs MTBF Meets FCC Class A Radiated Limits The PT3320 series is a single-output.

PT6939 : Non-Isolated DC-DC Converters. Outputs Adjustable Remote Sensing & Vo2) Standby Function Soft-Start Internal Sequencing Short Circuit Protection 23-pin Space-Saving Package Solderable Copper Case Ideal Power Source for DSPs The PT6935 ExcaliburTM series of power modules are dual output integrated switching regulators (ISRs) designed to power the latest mixed signal ICs. The dual.

TA78DL06BS : Low Dropout Voltage Regulator.

UC17133J : MOSFET and Power Drivers. ti UC17133, High Side Smart Power Switch. 300mA Continuous Output Current Low Side or High Side Switch Configuration to 65V Operation Overload and Short Circuit Protection Power Interruption Protection +6V Regulated Voltage 2mA Quiescent Current Programmable Overcurrent and Power Interruption Protection The UC37131, UC37132 and UC37133 are a family of smart power switches which can drive resistive.

X4645 : Cpu Supervisor With 64K EePROM. Selectable watchdog timer Low VCC detection and reset assertion --Four standard reset threshold voltages --Adjust low VCC reset threshold voltage using special programming sequence --Reset signal valid to VCC = 1V Low power CMOS --<20µA max standby current, watchdog on --<1µA standby current, watchdog off --3mA active current 64Kbits of EEPROM.

ISL8500 : 2A Standard Buck PWM Regulator The ISL8500 is a high-performance, simple output controller that provides a single, high frequency power solution for a variety of point-of-load applications. The ISL8500 integrates a 2A standard buck PWM controller and switching MOSFET. The PWM controller in the ISL8500 drives an internal switching N-Channel power MOSFET.

ISL9444 : Triple, 180° Out-of-Phase, Synchronous Step-Down PWM Controller The ISL9444 is a triple-output synchronous buck controller that integrates three PWM controllers which are fully featured and designed to provide multi-rail power for use in products such as cable and satellite set-top boxes, VoIP gateways, cable modems, and other home connectivity products.

FDMF6833C : Extra-Small, High-Performance, High-Frequency DrMOS Module The XS™ DrMOS family is Fairchild’s next-generation, fully optimized, ultra-compact, integrated MOSFET plus driver power stage solution for high-current, high-frequency, synchronous buck DC-DC applications. The FDMF6833C integrates a driver IC, two power MOSFETs, and a bootstrap Schottky.

 
0-C     D-L     M-R     S-Z