Details, datasheet, quote on part number: TPS3824-30QDBVRQ1
CategoryPower Management => Supervisory Circuits
Descriptionti TPS3824-30-Q1, Automotive Catalog Supply Voltage Supervisor W/watchdog Input, Reset, /RESET
CompanyTexas Instruments, Inc.
DatasheetDownload TPS3824-30QDBVRQ1 datasheet
Find where to buy


Features, Applications


AEC-Q100 Qualified for Automotive Applications Customer-Specific Configuration Control Can Be Supported Along With Major-Change Approval ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Using Human Body Model = 100 pF, 1500 ) Power-On Reset Generator With Fixed Delay Time ms (TPS3820) Manual Reset Input (TPS3820/3/5/8) Reset Output Available in Active-Low (TPS3820/3/4/5), Active-High (TPS3824) and Open-Drain (TPS3828) Supply Voltage Supervision Range 5 V Watchdog Timer (TPS3820/3/4/8) Supply Current 15 A (Typ) SOT23-5 Package


Microcontrollers, or Microprocessors Industrial Equipment Programmable Controls Automotive Systems Battery-Powered Equipment Intelligent Instruments Wireless Communications Systems

Contact factory for details. Q100 qualification data available on request.

The TPS382x family of supervisors provides circuit initialization and timing supervision, primarily for DSP and processor-based systems.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

During power-on, RESET is asserted when supply voltage VDD becomes higher than 1.1 V. Thereafter, the supply voltage supervisor monitors VDD and keeps RESET active as long as VDD remains below the threshold voltage VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time, td, starts after VDD has risen above the threshold voltage VIT. When the supply voltage drops below the threshold voltage VIT, the output becomes active (low) again. No external components are required. All the devices of this family have a fixed-sense threshold voltage VIT set by an internal voltage divider. The TPS3820/3/5/8 devices incorporate a manual reset input, MR. A low level at MR causes RESET to become active. The TPS3824/5 devices include a high-level output RESET. TPS3820/3/4/8 have a watchdog timer that is periodically triggered by a positive or negative transition at WDI. When the supervising system fails to retrigger the watchdog circuit within the time-out interval, ttout, RESET becomes active for the time period td. This event also reinitializes the watchdog timer. Leaving WDI unconnected disables the watchdog. In applications where the input to the WDI pin may be active (transitioning high and low) when the TPS3820/3/4/8 is asserting RESET, the TPS3820/3/4/8 does not return to a non-reset state when the input voltage is above Vt. If the application requires that input to WDI is active when RESET is asserted, WDI must be decoupled from the active signal. This can be accomplished by using an N-channel FET in series with the WDI pin, with the gate of the FET connected to the RESET output as shown in Figure 1.

Figure 1 The product spectrum is designed for supply voltages 3.3 V, and 5 V. The circuits are available 5-pin SOT23-5 package. The TPS382x-xxQ-Q1 devices are characterized for operation over a temperature range to 125C, and are qualified in accordance with AEC-Q100 stress test qualification for integrated circuits.


4.55 V The DBVR package indicates tape and reel of 3000 parts. FUNCTION/TRUTH TABLE INPUTS TPS3824/5 VDD>VIT OUTPUTS RESET


Some Part number from the same manufacture Texas Instruments, Inc.
TPS3824-33DBVR 30 - Supply Voltage Supervisor W/watchdog Input, Reset, /RESET
TPS3824-33DBVR ti TPS3824-33, Supply Voltage Supervisor W/watchdog Input, Reset, /RESET
TPS3824-33DBVT 30 - Supply Voltage Supervisor W/watchdog Input, Reset, /RESET
TPS3824-33DBVT ti TPS3824-33, Supply Voltage Supervisor W/watchdog Input, Reset, /RESET
TPS3824-33QDBVRQ1 30 - Supply Voltage Supervisor W/watchdog Input, Reset, /RESET
TPS3824-33QDBVRQ1 ti TPS3824-33-Q1, Automotive Catalog Supply Voltage Supervisor W/watchdog Input, Reset, /RESET
TPS3824-50DBVR 30 - Supply Voltage Supervisor W/watchdog Input, Reset, /RESET
TPS3824-50DBVR ti TPS3824-50, Supply Voltage Supervisor W/watchdog Input, Reset, /RESET
TPS3824-50DBVT 30 - Supply Voltage Supervisor W/watchdog Input, Reset, /RESET
TPS3824-50DBVT ti TPS3824-50, Supply Voltage Supervisor W/watchdog Input, Reset, /RESET
TPS3824-50QDBVRQ1 30 - Supply Voltage Supervisor W/watchdog Input, Reset, /RESET
TPS3824-XX Processor Supervisory Circuits
TPS3825 33 - Processor Supervisory Circuits
TPS3825-25DBVR Processor Supervisory Circuits
TPS3825-33DBVR 33 - Processor Supervisory Circuits
TPS3825-33DBVR Processor Supervisory Circuits
TPS3825-33DBVT 33 - Processor Supervisory Circuits
TPS3825-33DBVT Processor Supervisory Circuits
TPS3825-33QDBVRQ1 33 - Processor Supervisory Circuits
TPS3825-50DBVR Processor Supervisory Circuits

SN74GTL16612ADL : Backplane Logic (GTL, GTLP, FB/FB+, ABTE/ETL) ti SN74GTL16612A, 18-Bit LVTTL-To-GTL/GTL+ Universal Bus Transceivers

SN74HCT244PW : Non-Inverting Buffers and Drivers ti SN74HCT244, Octal Buffers And Line Drivers With 3-State Outputs

TMS320VC5510-200 : TMS320 Family

SN74AS640DWG4 : Octal BUS Transceivers WITH Open-collector Outputs

REG113EA-3/2K5G4 : DMOS 400ma Low-dropout Regulator

TPS40180RGETG4 : Single Phase Stackable Controller

OPA2140AIDGKR : 11MHz, Precision, Low Noise, Rail-to-Rail Output, 36V JFET Operational Amplifier The OPA140, OPA2140, and OPA4140 op amp family is a series of low-power JFET input amplifiers that feature good drift and low input bias current. The rail-to-rail output swing and input range that includes V allow des

SN74F2373DWG4 : D-Type (3-State) Latches ti SN74F2373, 25-Ohm Octal Transparent D-type Latch With 3-State Outputs

Same catergory

AD4016M82RBA-5 : Low Voltage Operation is More Suitable to be Used on Battery Backup, Portable Electronic.

AMS2930 : . Fixed and Adjustable Versions Available Output Current in excess of 150mA Very Low Quiescent Current Reverse Battery Protection Input-output Differential less than 0.6V Short Circuit protection Internal Thermal Overload Protection 60V Load Dump Protection -50V Reverse Transient Protection Mirror Image Insertion Protection APPLICATIONS Battery Powered.

BA6825FS : . The BA6825FS and BA6826FS are direct-drive motor drivers suitable for 2-phase, full-wave linear motors. They consist of a Hall amplifier control circuit and driver circuits. FApplications VCR cylinder motors F 1) Linear drive system provides low switching noise. 2) Constant supply voltage pin for hall devices. 3) High ratio of output current against.

BQ24008PWP : ti BQ24008, Single-cell Li-ion Charger For Pdas/internet Appliances, Integrated Fet, Bi-color Led.

GBPC12Series : Glass Passivated Single-phase Bridge Rectifier. Plastic package has Underwriters Laboratory Flammability Classification 94V-0 This series is UL listed under the Recognized Component Index, file number E54214 Integrally molded heatsink provides very low thermal resistance for maximum heat dissipation Universal 3-way terminals; snap-on, wire wrap-around, or P.C.B. mounting High forward surge current.

HV518 : High Voltage Driver. Source/sink Outputs Push-pull. Package Options Device HV518 40 Pin Dip HV518P 44 Plastic Chip Carrier HV518PJ Die HV518X 32 output lines 90V output swing Active pull-down Latches on all outputs 6MHz @ VDD to +85C operation The HV518 is designed for vacuum fluorescent or DC plasma applications, where it can serve as a segment, digit or matrix display driver. Each device has 32 outputs,.

HV9103 : Switchmode PWM Controller. +VIN Min 10V Max 70V 120V Feedback Voltage Max Duty Cycle 49% 99% MOSFET Switch BVDSS 150V 200V RDS (ON) 5.0 7.0 Package Options 14 Pin Plastic DIP 20 Pin Plastic PLCC HV9102PJ HV9103PJ to 120V input range 200V, 7.0 output MOSFET Current-Mode Control High Efficiency to 1MHz Internal Oscillator Internal Start-up Circuit The Supertex HV9100 through HV9103.

KIA7912P : 1a Three Terminal Negative Voltage Regulators.

LD2981ABXX25 : Very Low Drop Voltage Regulators With Inhibit Low Esr Output Capacitors Compatible.

P26TG-2405Z41 : Power/w = 6 ;; Input/vdc = 9-36/18-72 ;; Output/vdc = +/-3,3/5/12/15/18 Regulated ;; ISOlation = 1500V ;; Package = DIP24.

PT6921 : Non-Isolated DC-DC Converters. 25 Watt 5V Input Dual Output Integrated Switching Regulator Adjustable Output Voltage Remote Sense (both outputs) Standby Function Over-T emperature Protection Soft-Start Internal Sequencing 23-pin SIPPackage The is a series of 25W dual output ISRs that were purposely designed to power the latest generation DSP chips. Both output voltages are independently.

TPS3800G27 : . applications SC-70 (SOT-323) Package D Supply Current 9 A (Typ) D Power-On Reset Generator With Fixed Delay Time 400 ms Precision Supply Voltage Monitor 5 V, and Adjustable Manual Reset Input (Except TPS380101) Temperature Range. to 85C or Microprocessors Wireless Communication Systems Portable/Battery-Powered Equipment Programmable Controls Intelligent.

ADM1175 : The ADM1175 is an integrated hot swap controller and current sense amplifier that offers digital current and voltage monitoring via an on-chip, 12-bit analog-to-digital converter (ADC), communicated through an I2C interface. An internal current sense amplifier senses voltage across the sense resistor in the power path via the VCC pin and the SENSE pin.

SG6902 : Green-mode PFC/Flyback-PWM Controller The highly integrated SG6902 is designed for power supplies with boost PFC and Flyback PWM. It requires very few external components to achieve green-mode operation and versatile protections. It is available in a 20-pin SOP package. The patented interleave-switching feature synchronizes the PFC and PWM stages and reduces.

LTC4219 : 5A Integrated Hot Swap Controller The LTC4219 is an integrated solution for Hot Swap applications that allows a board to be safely inserted and removed from a live backplane. The part integrates a Hot Swap controller, power MOSFET and current sense resistor in a single package for small form factor applications. The LTC4219 provides separate inrush.

ADP2441 : 36 V,1 A, Synchronous, Step-Down DC-DC Regulator The ADP2441 is a constant frequency, current mode control, synchronous, step-down dc-to-dc regulator that is capable of driving loads up to 1 A with excellent line and load regulation characteristics. The ADP2441 operates with a wide input voltage range of 4.5 V to 36 V, which makes it ideal for regulating.

0-C     D-L     M-R     S-Z