Details, datasheet, quote on part number: TPS3828-33QDBVRQ1
PartTPS3828-33QDBVRQ1
CategorySemiconductors => Power Management => Supervisor and Reset IC
Part familyTPS3828-Q1 Voltage Monitor With Watchdog Timer for Automotive
DescriptionVoltage Monitor With Watchdog Timer for Automotive 5-SOT-23 -40 to 125
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleYes
DatasheetDownload TPS3828-33QDBVRQ1 datasheet
Quote
Find where to buy
 
Specifications 
Output Driver Type / Reset OutputActive-low,Open-drain
Time Delay(ms)200
Reset Threshold Accuracy(%)2.2
Package GroupSOT-23
Iq(Typ)(uA)15
Operating Temperature Range(C)-40 to 125
# of Supplies Monitored1
RatingAutomotive
Monitored Voltage 1 (typ)(Nom)(V)3.3,5
FeaturesActive Low Enable,Manual Reset,Watchdog Timer
Approx. Price (US$)0.77 | 1ku
VCC(Min)(V)1.1
Watchdog Timer WDI(sec)1.6
VCC(Max)(V)5.5
Monitored Voltage 2 (typ)(Nom)(V)N/A
Threshold Voltage 2 (typ)(Typ)(V)N/A
Threshold Voltage 1(Typ)(V)2.93,4.55
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
5DBVSOT-23R-PDSO-G3000LARGE T&RPDIQ 1.62.91.2.95

 

Features, Applications

features

Delay Time ms (TPS3820) Manual Reset Input (TPS3820/3/5/8) Reset Output Available in Active-Low (TPS3820/3/4/5), Active-High (TPS3824) and Open-Drain (TPS3828) Supply Voltage Supervision Range 5 V Watchdog Timer (TPS3820/3/4/8) Supply Current 15 µA (Typ) SOT23-5 Package Temperature Range. to 85°C

applications

or Microprocessors Industrial Equipment Programmable Controls Automotive Systems Portable/Battery-Powered Equipment Intelligent Instruments Wireless Communications Systems Notebook/Desktop Computers

description

The TPS382x family of supervisors provides circuit initialization and timing supervision, primarily for DSP and processor-based systems.

During power-on, RESET is asserted when GND supply voltage VDD becomes higher than 1.1 V. Thereafter, the supply voltage supervisor monitors VDD and keeps RESET active as long as VDD remains below the threshold voltage VIT­. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time, td, starts after VDD has risen above the threshold voltage VIT­. When the supply voltage drops below the threshold voltage VIT­, the output becomes active (low) again. No external components are required. All the devices of this family have a fixed-sense threshold voltage VIT­ set by an internal voltage divider.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

This document contains information on products in more than one phase of development. The status of each device is indicated on the page(s) specifying its electrical characteristics.

The TPS3820/3/5/8 devices incorporate a manual reset input, MR. A low level at MR causes RESET to become active. The TPS3824/5 devices include a high-level output RESET. TPS3820/3/4/8 have a watchdog timer that is periodically triggered by a positive or negative transition at WDI. When the supervising system fails to retrigger the watchdog circuit within the time-out interval, ttout, RESET becomes active for the time period td. This event also reinitializes the watchdog timer. Leaving WDI unconnected disables the watchdog. In applications where the input to the WDI pin may be active (transitioning high and low) when the TPS3820/3/4/8 is asserting RESET, the TPS3820/3/4/8 does not return to a non-reset state when the input voltage is above Vt. If the application requires that input to WDI is active when RESET is asserted, WDI must be decoupled from the active signal. This can be accomplished by using an N-channel FET in series with the WDI pin, with the gate of the FET connected to the RESET output as shown in Figure 1.

Figure 1 The product spectrum is designed for supply voltages 3.3 V, and 5 V. The circuits are available 5-pin SOT23-5 package. The TPS382x devices are characterized for operation over a temperature range to 85°C.

PACKAGE INFORMATION DEVICE NAME TPS3828-33DBVT TPS3828-50DBVT DEVICE NAME TPS3828-33DBVR TPS3828-50DBVR THRESHOLD VOLTAGE§ 4.55 V MARKING PDEI PDDI PAPI PAQI PARI PASI PATI PAUI PAVI PAWI PDGI PDFI PDII PDHI

The DBVT package indicates tape and reel of 250 parts. The DBVR package indicates tape and reel of 3000 parts. § For other threshold voltage versions, please contact the local TI sales office.

FUNCTION/TRUTH TABLE INPUTS MR¶ # TPS3824/5 VDD>VIT OUTPUTS RESET RESET#

 

Related products with the same datasheet
TPS3828-33DBVR
TPS3828-33DBVT
TPS3828-50DBVR
TPS3828-50DBVT
TPS3828-50QDBVRQ1
TPS3828-50QDBVRG4Q
TPS3828-50QDBVRG4Q
TPS3828-50QDBVRG4Q
Some Part number from the same manufacture Texas Instruments, Inc.
TPS3828-50DBVR 33 - Processor Supervisory Circuits
TPS3828-50DBVR Processor Supervisory Circuits
TPS3828-50DBVT 33 - Processor Supervisory Circuits
TPS3828-50DBVT Processor Supervisory Circuits
TPS3828-50QDBVRQ1 33 - Processor Supervisory Circuits
TPS3836E18
TPS3836H30 Nanopower Supervisory Circuits
TPS3836J25
TPS3836K33
TPS3836L30
TPS3837E18
TPS3837H30 Nanopower Supervisory Circuits
TPS3837J25
TPS3837K33
TPS3837L30
TPS3838E18
TPS3838H30 Nanopower Supervisory Circuits
TPS3838J25
TPS3838K33
TPS3838L30
TPS40000 Low Input Voltage Mode Synchronous Buck Controller

SN74ACT7882-20PN : Synchronous FIFOs ti SN74ACT7882, 2048 X 18 Synchronous Fifo Memory

SN75179B : Rs485/422a Differential Driver And Receiver Pair: 2 Drvrs/2 RCVRS

TPA6030A4PWP : ti TPA6030A4, Wide Supply Voltage, Low Power, Class-ab Audio Amplifier

TPS2011PW : Power-distribution

ISO7221AD : Dual Channel, 1/1, 1Mbps Digital Isolator The ISO7220 and ISO7221 are dual-channel digital isolators. To facilitate PCB layout, the channels are oriented in the same direction in the ISO7220 and in opposite directions in the ISO7221. These devices have a logic input and output buffer separated by T

TMS4257-15SD : 262,144-bit Dynamic Random-access Memories

TLC085AIDRG4 : Family OF WIDE Bandwidth HIGH Output Drive Single Supply Operational Amplifiers

FCT162374ATPACTG4 : Logic - Flip Flop Integrated Circuit (ics) Surface Mount Tape & Reel (TR) 32mA, 64mA 4.5 V ~ 5.5 V; IC 16BIT TRIGG D F-F 3ST 48TSSOP Specifications: Mounting Type: Surface Mount ; Package / Case: 48-TFSOP (0.240", 6.10mm Width) ; Function: Set(Preset) and Reset ; Number of Bits per Element: 8 ; Number of Elements: 2 ; Current - Output High, Low: 32mA, 64mA ; Output Type: Tri-State Non Inverted ; Trigger Type: Positive Edge ; Type

TPS2817DBVTG4 : Pmic - Mosfet, Bridge Driver - External Switch Integrated Circuit (ics) Non-Inverting Tape & Reel (TR) 2A 4 V ~ 14 V; IC NONINVERT FET DRVR SOT-23-5 Specifications: Configuration: Low-Side ; Voltage - Supply: 4 V ~ 14 V ; Current - Peak: 2A ; Delay Time: 24ns ; Package / Case: SC-74A, SOT-753 ; Packaging: Tape & Reel (TR) ; Number of Outputs: 1 ; Input Type: Non-Inverting ; Number of Configurations: 1 ; Operating Temperature: -40°C ~ 125°C ;

NE5532ADE4 : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) General Purpose Tube 8mA ±5 V ~ 15 V; IC OPAMP GP 10MHZ DUAL LN 8SOIC Specifications: Packaging: Tube ; Amplifier Type: General Purpose ; Number of Circuits: 2 ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Slew Rate: 9 V/µs ; Gain Bandwidth Product: 10MHz ; Current - Supply: 8mA ; Current - Output / Channel: 38mA ; Voltage - Supply, Single/Dual (±): ±5 V ~ 15 V ;

BQ2201SN-NTRG4 : NVSRAM Power Management ti BQ2201, SRAM Nonvolatile Controller ic For 1 SRAM Bank

 
0-C     D-L     M-R     S-Z