Details, datasheet, quote on part number: TPS3836E18
PartTPS3836E18
CategoryAnalog & Mixed-Signal Processing => Power
TitlePower
Description
CompanyTexas Instruments, Inc.
DatasheetDownload TPS3836E18 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

D Supply Current 220 nA (Typ) D Precision Supply Voltage Supervision

Applications Using Low-Power DSPs, Microcontrollers, or Microprocessors Portable/Battery-Powered Equipment Intelligent Instruments Wireless Communication Systems Notebook Computers Automotive Systems Applications Using the MSP430

Delay Time 200 ms Push/Pull RESET Output (TPS3836), RESET Output (TPS3837), or Open-Drain RESET Output (TPS3838) Manual Reset 5-Pin SOT-23 Package Temperature Range to 85C

description

The TPS3837, TPS3838 families of supervisory circuits provide circuit initialization and timing supervision, primarily for DSP and processor-based systems. During power on, RESET is asserted when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps RESET output active as long as VDD remains below the threshold voltage VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time starts after VDD has risen above the threshold voltage VIT.

When CT is connected to GND a fixed delay time of typical ms is asserted. When connected to VDD the delay time is typically 200 ms. When the supply voltage drops below the threshold voltage VIT, the output becomes active (low) again. All the devices of this family have a fixed-sense threshold voltage VIT set by an internal voltage divider. The TPS3836 has an active-low push-pull RESET output. The TPS3837 has active-high push-pull RESET, and TPS3838 integrates an active-low open-drain RESET output.

TYPICAL OPERATING CIRCUIT Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

The product spectrum is designed for supply voltages 3 V, and 3.3 V. The circuits are available 5-pin SOT-23 package. The TPS3837, TPS3838 families are characterized for operation over a temperature range to 85C.

PACKAGE INFORMATION TA DEVICE NAME TPS3838L30DBVT TPS3838K33DBVT THRESHOLD VOLTAGE 2.93 V SYMBOL PDNI PDSI PHRI PCAI PDTI PDOI PDRI PCBI PDUI PDQI PDPI PCCI PDVI

The DBVR passive indicates tape and reel of 3000 parts. The DBVT passive indicates tape and reel of 250 parts. ORDERING INFORMATION

Reel Package Nominal Supply Voltage Typical Reset Threshold Voltage Functionality Family

 

Related products with the same datasheet
TPS3836E18DBVR
TPS3836E18DBVT
TPS3836E18DBVRG4
TPS3836E18DBVTG4
Some Part number from the same manufacture Texas Instruments, Inc.
TPS3836E18DBVR
TPS3836H30 Nanopower Supervisory Circuits
TPS3836J25
TPS3836K33
TPS3836L30
TPS3837E18
TPS3837H30 Nanopower Supervisory Circuits
TPS3837J25
TPS3837K33
TPS3837L30
TPS3838E18
TPS3838H30 Nanopower Supervisory Circuits
TPS3838J25
TPS3838K33
TPS3838L30
TPS40000 Low Input Voltage Mode Synchronous Buck Controller
TPS40001
TPS40002
TPS40003
TPS40004 Synchronous Buck DC/DC Controller
TPS40005

PCI6621 : Integrated Dual-socket Ultramedia PC Card Controller, Smart Card Controller, And Flash Media

TLC27M4BCD : ti TLC27M4B, LinCMOS(TM) Precision Quad Operational Amplifier

TLV5535IPWR : ti TLV5535, 8 Bit, 35 MSPS ADC Single Ch., Low Power

ADS5527IRGZTG4 : ADS5527 is a high performance 12-bit, 210-MSPS A/D converter. It offers state-of-the art functionality and performance using advanced techniques to minimize board space. With high analog bandwidth and low jitter input clock buffer, the ADC supports both high SNR and high SFDR at high input frequenci

TPA3120D2PWPR : The TPA3120D2 is a 25-W (per channel) efficient, Class-D audio power amplifier for driving stereo speakers in a single-ended configuration or a mono bridge-tied speaker. The TPA3120D2 can drive stereo speakers as low as 4 . The efficiency of the TPA3120D2 eliminates the need for an external heat sin

SN54LS692FK : Synchronous Up/down Counters WITH Output Registers AND Multiplexed 3-state Outputs

SN54HC21_06 : 8-bit Addressable Latches

MSP430F5310IPT : Embedded - Microcontroller Integrated Circuit (ics) Internal Tape & Reel (TR) 1.8 V ~ 3.6 V; IC MCU 16BIT 32KB FLASH 48LQFP Specifications: Program Memory Size: 32KB (32K x 8) ; RAM Size: 6K x 8 ; Number of I /O: 31 ; Package / Case: 48-LQFP ; Speed: 25MHz ; Oscillator Type: Internal ; Packaging: Tape & Reel (TR) ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: RISC ; Data Converters: A/D 8x10b ; Core

Same catergory

2SJ108 : P-channel Junction Type ( Low Noise Audio Amplifier Applications ).

AD629 : High Common Mode Voltage Difference Amplifier. Improved Replacement for: INA117P and 270 V Common-Mode Voltage Range Input Protection to: 500 V Common Mode 500 V Differential Wide Power Supply Range 10 V Output Swing 12 V Supply 1 mA Max Power Supply Current HIGH ACCURACY DC PERFORMANCE 3 ppm Max Gain Nonlinearity V/ C Max Offset Drift V/ C Max Offset Drift (AD629B) 10 ppm/ C Max Gain Drift EXCELLENT.

AV9107C-13CS08 : Cpu Frequency Generator. The AV9107C-13 offers a tiny footprint solution for generating two simultaneous clocks. The AV9107C-13 uses a 20 MHz crystal to generate two PLL synthesis outputs of 20 and 40 MHz. The Output enable pin will tristate the 40 MHz output when low (maintaining the 20 MHz output runing in both logic levels). The power pin takes the device to a low current.

CLC5644 : Low Power, Low Cost, Quad Operational Amplifier. The is a quad, current feedback operational amplifier that is perfect for many cost sensitive applications that require high performance, especially when power dissipation is critical. Not only does the CLC5644 offer excellent economy in board space, but has an excellent performance vs power tradeoff which yields a 170MHz Small Signal Bandwidth while.

CVA1775N : CRT Driver + DC Bias Amplifier. The CVA1775N includes a cascode CRT driver and a DC bias cutoff amplifier. All of the active components are inside the CVA1775N. Only the passive components and protection diodes are needed to drive a CRT tube. The CVA1775N can easily drive 70KHz monitors. With the unique feature of DC bias circuitry the printed circuit board will shrink as EMI performance.

FX839 : Analogue Control Interface. Custom IRQ Generator with Variable Scalable ADC Clock Frequencies 8-Bit Reference Settings from Xtal/Clock Two Variable Attenuators Low Power (3.0V Operation) Serial Interface to Host C 24-Pin SSOP Package This product comprises a selection of independent functional blocks vital to modern microcomputer controlled radio-frequency communications equipment.

KHB2442A01 : = Us-c/p ;; Package = -.

LA4471 : Btl-ocl 20W Power Amplifier For Car Stereo Use.

LM218D : ti LM218, High-performance Operational Amplifier. D Small Signal Bandwidth. 15 MHz Typ D Slew Rate. 50 V/s Min D Bias Current. 250 nA Max (LM118, LM218) Supply Voltage Range. 20 V Internal Frequency Compensation Input and Output Overload Protection Same Pin Assignments as General-Purpose Operational Amplifiers The LM118, LM218, and LM318 are precision, fast operational amplifiers designed for applications.

LTK00CN8 : Thermocouple Cold Junction Compensator And Matched Amplifier.

MAX4142 : 250MHz, Low-Power, High Output Current, Differential Line Driver. 250MHz -3dB Bandwidth (AV o 1400V/s Slew Rate at 10MHz CMR o 0.01%/0.01 Differential Gain/Phase o 6V Differentially into 100 Output Drive o 1mA Shutdown Capability o 12.5mA Quiescent Supply Current o Available in 14-Pin Narrow SO Package The MAX4142 differential line driver combines highspeed performance with fully symmetrical differential inputs.

MCM40256 : 256k X 40 Bit Dynamic Random Access Memory Module.

OPA349 : . LOW SUPPLY CURRENT: 1A GAIN-BANDWIDTH: 70kHz UNITY GAIN STABLE LOW INPUT BIAS CURRENT: 10pA (max) WIDE SUPPLY RANGE: to 5.5V INPUT RANGE 200mV BEYOND RAILS OUTPUT SWINGS 150mV OF RAILS OUTPUT DRIVE CURRENT: 8mA OPEN-LOOP GAIN: 90dB MicroPACKAGES: SOT23-5, SOT23-8 The OPA349 and the OPA2349 are ultra-low power operational amplifiers that provide 70kHz.

PAI-1801 : Coupled Inductors For Use in Adsl Pots Low Pass Filter.

TLE2084AMFK : Excalibur High-speed JFET-input Operational Amplifiers. Direct Upgrades TL05x, TL07x, and TL08x BiFET Operational Amplifiers Greater Than 2 Bandwidth (10 MHz) and 3 Slew Rate (45 V/s) Than TL08x On-Chip Offset Voltage Trimming for Improved DC Performance Wider Supply Rails Increase Dynamic Signal Range 19 V The TLE208x series of JFET-input operational amplifiers more than double the bandwidth and triple.

TLV2342ID : ti TLV2342, Dual LinCMOS(TM) Low-voltage High-speed Operational Amplifier.

HMC-C041 : GaAs MMIC I/Q MIXER MODULE 6 - 10 GHz The HMC-C041 is a passive I/Q MMIC mixer housed in a miniature hermetic module which can be used as either an Image Reject Mixer or a Single Sideband Upconverter. The module utilizes two standard Hittite double balanced mixer cells and a 90 degree hybrid fabricated on a GaAs MESFET process. A low frequency quadrature.

SGM3157 : 4.5? Low Voltage SPDT Analog Switch In 6-pin SC70 The SGM3157 is a single, bidirectional, single-pole/double- throw (SPDT) CMOS analog switches designed to operate from a single +1.8V to +5.5V supply. It high-bandwidth (300MHz) and low ON-resistance (4.5? typ), Targeted applications for audio switching. SGM3157 guaranteed on-resistance matching (0.3?.

TS617 : High-speed Operational Amplifiers Dual wideband high output current operational amplifier.

OPA2141 : 10MHz, Single Supply, Low Noise, JFET Precision Amplifier The OPA141, OPA2141, and OPA4141 amplifier family is a series of low-power JFET input amplifiers that feature good drift and low input bias current. The rail-to-rail output swing and input range that includes V allow designers to take advantage of the low-noise characteristics of JFET amplifiers.

 
0-C     D-L     M-R     S-Z