Details, datasheet, quote on part number: TPS3836L30DBVT
PartTPS3836L30DBVT
CategorySemiconductors => Power Management => Supervisor and Reset IC
Part familyTPS3836 NanoPower Supervisory Circuits
TitlePower
DescriptionNanoPower Supervisory Circuits 5-SOT-23 -40 to 85
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleYes
DatasheetDownload TPS3836L30DBVT datasheet
Quote
Find where to buy
 
Specifications 
Operating Temperature Range(C)-40 to 85
Package GroupSOT-23
RatingCatalog
Output Driver Type / Reset OutputActive-low,Push-pull
Time Delay(ms)10,200
Monitored Voltage 1 (typ)(Nom)(V)1.8,2.5,3,3.3
# of Supplies Monitored1
Iq(Typ)(uA)0.22
Approx. Price (US$)0.85 | 1ku
Reset Threshold Accuracy(%)1.75
Watchdog Timer WDI(sec)None
VCC(Max)(V)6
VCC(Min)(V)1.6
Threshold Voltage 1(Typ)(V)1.71,2.25,2.64,2.79,2.93
Monitored Voltage 2 (typ)(Nom)(V)N/A
Threshold Voltage 2 (typ)(Typ)(V)N/A
FeaturesActive Low Enable,Manual Reset
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
5DBVSOT-23R-PDSO-G250SMALL T&RPCAI 1.62.91.2.95
Evaluation Kits
ADS8332EVMV2-PDK: ADS8332 16-Bit 500KSPS Low-Power Serial ADC Evaluation Module Performance Demonstration Kit (PDK)

 

Features, Applications

D Supply Current 220 nA (Typ) D Precision Supply Voltage Supervision

Applications Using Low-Power DSPs, Microcontrollers, or Microprocessors Portable/Battery-Powered Equipment Intelligent Instruments Wireless Communication Systems Notebook Computers Automotive Systems Applications Using the MSP430

Delay Time 200 ms Push/Pull RESET Output (TPS3836), RESET Output (TPS3837), or Open-Drain RESET Output (TPS3838) Manual Reset 5-Pin SOT-23 Package Temperature Range to 85C

description

The TPS3837, TPS3838 families of supervisory circuits provide circuit initialization and timing supervision, primarily for DSP and processor-based systems. During power on, RESET is asserted when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps RESET output active as long as VDD remains below the threshold voltage VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time starts after VDD has risen above the threshold voltage VIT.

When CT is connected to GND a fixed delay time of typical ms is asserted. When connected to VDD the delay time is typically 200 ms. When the supply voltage drops below the threshold voltage VIT, the output becomes active (low) again. All the devices of this family have a fixed-sense threshold voltage VIT set by an internal voltage divider. The TPS3836 has an active-low push-pull RESET output. The TPS3837 has active-high push-pull RESET, and TPS3838 integrates an active-low open-drain RESET output.

TYPICAL OPERATING CIRCUIT Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

The product spectrum is designed for supply voltages 3 V, and 3.3 V. The circuits are available 5-pin SOT-23 package. The TPS3837, TPS3838 families are characterized for operation over a temperature range to 85C.

PACKAGE INFORMATION TA DEVICE NAME TPS3838L30DBVT TPS3838K33DBVT THRESHOLD VOLTAGE 2.93 V SYMBOL PDNI PDSI PHRI PCAI PDTI PDOI PDRI PCBI PDUI PDQI PDPI PCCI PDVI

The DBVR passive indicates tape and reel of 3000 parts. The DBVT passive indicates tape and reel of 250 parts. ORDERING INFORMATION

Reel Package Nominal Supply Voltage Typical Reset Threshold Voltage Functionality Family

 

Related products with the same datasheet
TPS3836L30DBVR
TPS3836L30DBVRG4
TPS3836L30DBVTG4
Some Part number from the same manufacture Texas Instruments, Inc.
TPS3837E18
TPS3837H30 Nanopower Supervisory Circuits
TPS3837J25
TPS3837K33
TPS3837L30
TPS3838E18
TPS3838H30 Nanopower Supervisory Circuits
TPS3838J25
TPS3838K33
TPS3838L30
TPS40000 Low Input Voltage Mode Synchronous Buck Controller
TPS40001
TPS40002
TPS40003
TPS40004 Synchronous Buck DC/DC Controller
TPS40005
TPS40007 Low Input Synchronous Buck Controller
TPS40009
TPS40020 Enhanced Low Input Voltage (2.25V-5.5V) Buck<<<>>>dc-to-dc Controllers Are Designed For Non-isolated Synchronous Buck Regulators, Providing Enhanced Operation And Design Flexability Through User Programmability.<<<>>>features<<<>>>operating
TPS40021
TPS40050 Q1 - Automotive Catalog Wide-input Synchronous Buck Controller

5962-9555201QHA : ti TLC2272, Dual Low-noise Rail-to-rail Operational Amplifier

CY74FCT162374TPVCT : D-Type (3-State) Flip-Flops ti CY74FCT162374T, 16-Bit Edge-triggered D-type Flip-flops With 3-State Output

DAC714HL : ti DAC714, 16-Bit Digital-to-analog Converter With Serial Data Interface

SN54ALS112AJ : D-Type Flip-Flops ti SN54ALS112A, Dual J-k Negative-edge-triggered Flip-flops With Clear And Preset

SN65LVDT125ADBTR : ti SN65LVDT125A, 4x4 1.5 GBPS LVDS Crosspoint Switch

TLC279MFKB : ti TLC279, Quad Precision Single Supply Operational Amplifier

TPS3813L30 :

TLV7211AIDBVR : The TLV7211 and TLV7211A are micropower CMOS comparators available in the space-saving SOT-23-5 package. This makes the comparators ideal for space- and weight-critical designs. The TLV7211A features an input offset voltage of 5 mV, and the TLV7211 features an input offset voltage of 15 mV. The m

SN74AHC14Q-Q1 : HEX Inverters

SN74ALS577ANSRE4 : 2.5-v/3.3-v 16-bit BUS Transceivers WITH 3-state Outputs

TLC5948PWPR : 16-Ch ES-PWM LED Driver, 7-Bit Dot Cor, 7-Bit Global Brightness, Power Save Mode, Full Diagnostics The TLC5948 is a 16-channel, constant-current sink LED driver. Each channel has an individually-adjustable, pulse width modulation (PWM) grayscale (GS) brightness control with 65,536 steps and 128 ste

INA163UAE4 : AMP INSTRUMENTATION, SOIC14, 163 Specifications: No. of Amplifiers: 1 ; Input Offset Voltage: 250V ; Gain dB Min: - ; Gain dB Max: - ; Bandwidth: 800kHz ; Amplifier Output: Single Ended ; Noise Figure Typ: - ; CMRR: 116dB ; Slew Rate: 15V/s ; Supply Voltage Range: 4.5V to 18V ; Supply Current: 10mA ; Amplifier Case Style: SOI

 
0-C     D-L     M-R     S-Z