Details, datasheet, quote on part number: TPS3837J25DBVR
PartTPS3837J25DBVR
CategorySemiconductors => Power Management => Supervisor and Reset IC
Part familyTPS3837 NanoPower Supervisory Circuits
TitlePower
DescriptionNanoPower Supervisory Circuits 5-SOT-23 -40 to 85
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload TPS3837J25DBVR datasheet
Quote
Find where to buy
 
Specifications 
Operating Temperature Range(C)-40 to 85
Package GroupSOT-23
RatingCatalog
Time Delay(ms)10,200
Monitored Voltage 1 (typ)(Nom)(V)1.8,2.5,3,3.3
Threshold Voltage 1(Typ)(V)1.71,2.25,2.64,2.93
# of Supplies Monitored1
Iq(Typ)(uA)0.22
Approx. Price (US$)0.85 | 1ku
Reset Threshold Accuracy(%)1.75
Watchdog Timer WDI(sec)None
VCC(Max)(V)6
VCC(Min)(V)1.6
Output Driver Type / Reset OutputActive-high,Push-pull
Monitored Voltage 2 (typ)(Nom)(V)N/A
Threshold Voltage 2 (typ)(Typ)(V)N/A
FeaturesActive Low Enable,Manual Reset
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
5DBVSOT-23R-PDSO-G3000LARGE T&RPDRI 1.62.91.2.95

 

Features, Applications

D Supply Current 220 nA (Typ) D Precision Supply Voltage Supervision

Applications Using Low-Power DSPs, Microcontrollers, or Microprocessors Portable/Battery-Powered Equipment Intelligent Instruments Wireless Communication Systems Notebook Computers Automotive Systems Applications Using the MSP430

Delay Time 200 ms Push/Pull RESET Output (TPS3836), RESET Output (TPS3837), or Open-Drain RESET Output (TPS3838) Manual Reset 5-Pin SOT-23 Package Temperature Range to 85C

description

The TPS3837, TPS3838 families of supervisory circuits provide circuit initialization and timing supervision, primarily for DSP and processor-based systems. During power on, RESET is asserted when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps RESET output active as long as VDD remains below the threshold voltage VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time starts after VDD has risen above the threshold voltage VIT.

When CT is connected to GND a fixed delay time of typical ms is asserted. When connected to VDD the delay time is typically 200 ms. When the supply voltage drops below the threshold voltage VIT, the output becomes active (low) again. All the devices of this family have a fixed-sense threshold voltage VIT set by an internal voltage divider. The TPS3836 has an active-low push-pull RESET output. The TPS3837 has active-high push-pull RESET, and TPS3838 integrates an active-low open-drain RESET output.

TYPICAL OPERATING CIRCUIT Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

The product spectrum is designed for supply voltages 3 V, and 3.3 V. The circuits are available 5-pin SOT-23 package. The TPS3837, TPS3838 families are characterized for operation over a temperature range to 85C.

PACKAGE INFORMATION TA DEVICE NAME TPS3838L30DBVT TPS3838K33DBVT THRESHOLD VOLTAGE 2.93 V SYMBOL PDNI PDSI PHRI PCAI PDTI PDOI PDRI PCBI PDUI PDQI PDPI PCCI PDVI

The DBVR passive indicates tape and reel of 3000 parts. The DBVT passive indicates tape and reel of 250 parts. ORDERING INFORMATION

Reel Package Nominal Supply Voltage Typical Reset Threshold Voltage Functionality Family

 

Related products with the same datasheet
TPS3837J25DBVT
TPS3837J25DBVRG4
TPS3837J25DBVTG4
Some Part number from the same manufacture Texas Instruments, Inc.
TPS3837J25DBVT
TPS3837K33
TPS3837L30
TPS3838E18
TPS3838H30 Nanopower Supervisory Circuits
TPS3838J25
TPS3838K33
TPS3838L30
TPS40000 Low Input Voltage Mode Synchronous Buck Controller
TPS40001
TPS40002
TPS40003
TPS40004 Synchronous Buck DC/DC Controller
TPS40005
TPS40007 Low Input Synchronous Buck Controller
TPS40009
TPS40020 Enhanced Low Input Voltage (2.25V-5.5V) Buck<<<>>>dc-to-dc Controllers Are Designed For Non-isolated Synchronous Buck Regulators, Providing Enhanced Operation And Design Flexability Through User Programmability.<<<>>>features<<<>>>operating
TPS40021
TPS40050 Q1 - Automotive Catalog Wide-input Synchronous Buck Controller
TPS40051
TPS40052 SYNCH Buck DC/DC Control W/ddr Tracking

CD14538BPW : Monostable Multivibrators ti CD14538B, CMOS Dual Precision Monostable Multivibrator (1250C Operation)

SN74AUC1G66YZAR : Single Bilateral Analog Switch

TPS79325DBVRQ1 : ti TPS79325-Q1, Automotive Catalog Ultralow Noise High PSRR Fast RF 200-mA Low-dropout Linear Regulators

TPS65055RSMT : 2.25MHz Dual Step-down Converter With 4 Low Input Voltage LDOs The TPS65055 is an integrated Power Management IC for applications powered by one Li-Ion or Li-Polymer cell, which require multiple power rails. The TPS65055 provides two highly efficient, 2.25 MHz step-down converters targeted at p

TPS71728DCKR : Low Noise, High-bandwidth PSRR Low-dropout 150ma Linear Regulator

TSB14AA1APFBG4 : Ieee 1394-1995, 3.3V, 1-port, 50/100Mbps, Backplane PHY

MSP430F47196IPZ : Embedded - Microcontroller Integrated Circuit (ics) Internal Cut Tape (CT) 1.8 V ~ 3.6 V; IC MCU 16B 120K FLASH LP 100LQFP Specifications: Program Memory Size: 120KB (120K x 8) ; RAM Size: 4K x 8 ; Number of I /O: 68 ; Package / Case: 100-LQFP ; Speed: 16MHz ; Oscillator Type: Internal ; Packaging: Cut Tape (CT) ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: RISC ; Data Converters: A/D 6x16b ; Core Size

OPA728AIDRBRG4 : e-trim 20MHz, High Precision CMOS Operational Amplifier The OPA727 and OPA728 series op amps use a state-of-the-art 12V analog CMOS process and e-trim, a package-level trim, offering outstanding dc precision and ac performance. The extremely low offset (150V max) and drift (1.5V/C) are achieved

VCA810AIDRG4 : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) Variable Gain Tape & Reel (TR) 20mA 4 V ~ 6 V; IC OPAMP VGA 35MHZ SGL 8SOIC Specifications: Packaging: Tape & Reel (TR) ; Amplifier Type: Variable Gain ; Number of Circuits: 1 ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Slew Rate: 350 V/s ; Gain Bandwidth Product: - ; Current - Supply: 20mA ; Current - Output / Channel: 60mA ; Voltage - Supply, Single/Dual ():

OPA4188AIPW : 0.03V/C, Low Noise, Rail-to-Rail Output, 36V Zero-Drift Operational Amplifier The OPA4188 operational amplifier uses TI proprietary auto-zeroing techniques to provide low offset voltage (25 V, max), and near zero-drift over time and temperature. These miniature, high-precision, low quiescent curr

 
0-C     D-L     M-R     S-Z